The liquid phase oxidation of p-xylene has been carried out with oxygen-enriched gas, and the manganese component was precipitated probably via over-oxidation to $Mn^{4+}$. The precipitation increased with rising oxygen concentration in the reaction gas and occurred mainly in the later part of the oxidation. The activity of the reaction decreased, and the blackening of the product and side reactions to carbon dioxide increased with the degree of precipitation. Precipitation can be decreased with the addition of metal ions, such as cerium, chromium and iron.

Several compounds of 3,9-dialkylxanthines were prepared from 1-methyl-6-chlorouracil via nucleophillic reactions with different aliphatic amines, followed by nitrosation, reduction, formaylation and finally dehydrocyclization. On the other hands, a series of 8-aryl-3,9-dimethylxanthines were synthesized by dehydrocyclization of 5-arylamido-1-methyl-6-methylaminouracils either by fussion or oxidation of 5-arylidine-amino-1-methyl-6-methylaminouracils using sodium periodate. Phosphoryl chloride was found to be uneffective reagent for dehydrocyclization that, gave another products from 1,3-oxazolo[5,4-d] pyrimidines.

Second-order-rate constants ($k_N$) have been measured spectrophotometrically for the reactions of 4-nitrophenyl 2-thiophenecarboxylate (1a) with a series of secondary alicyclic amines in H2O containing 20 mole % DMSO at 25.0 $^{\circ}C$ . The ester 1a is less reactive than 4-nitrophenyl 2-furoate (1b) but more reactive than 4-nitrophenyl benzoate (1c) except towards piperazinium ion. The Brønsted-type plots for the aminolyses of 1a, 1b and 1c are linear with a $\beta$nuc value of 0.92, 0.84 and 0.85, respectively, indicating that the replacement of the CH=CH group by a sulfur or an oxygen atom in the benzoyl moiety of 1c does not cause any mechanism change. The reaction of piperidine with a series of substituted phenyl 2-thiophenecarboxylates gives a linear Hammett plot with a large $\rho^-$ value ($\rho^-$ = 3.11) when $\sigma^- $ constants are used. The linear Brønsted and Hammett plots with large $\beta$nuc and $\rho^-$ values suggest that the aminolysis of 1a proceeds via rate-determining break-down of the addition intermediate to the products.

Laccase could be successfully assembled on an amine-derivatized platinum electrode by glutaraldehyde coupling. The enzyme layer formed on the surface does not communicate electron directly with the electrode, but the enzymatic activity of the surf ace could be followed by electrochemical detection of enzymatically oxidized products. The well-known laccase substrates, ABTS (2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)) and PPD (p-phenylenediamine) were used. ABTS can be detected down to 0.5 ${\mu}M$ with linear response up to 15 ${\mu}M$ and current sensitivity of 75 nA/ ${\mu}M.$ PPD showed better response with detection limit of 0.05 ${\mu}M$, linear response up to 20 ${\mu}M$, and current sensitivity of 340 nA/ ${\mu}M$ with the same electrode. The sensor responses fit well to the Michaelis-Menten equation and apparent $K_M$ values are 0.16 mM for ABTS and 0.055 mM for PPD, which show the enzymatic reaction is the rate-determining step. The laccase electrode we developed is very stable and more than 80% of initial activity was still maintained after 2 months of uses.

Berberine and berberrubine, which display antitumor activity, have also demonstrated distinct enzyme-poisoning activities by stabilizing topoisomerase Ⅱ-DNA cleavable complexes. The protoberberine berberrubine differs in chemical structure with berberine at only one position, however, it shows a prominent activity difference from berberine. Solution structures of berberine and berberrubine determined by NMR spectroscopy are similar, however, the minor structural rearrangement has been observed near 19 methoxy or hydroxyl group. We suggest that the DNA cleavage activities of topoisomerase Ⅱ poisons could be correlated with both chemical environments and minor structural change together with hydrophobicity of interacting side chains of drugs with DNA molecule.

The voltammetric behavior of spontaneously adsorbing Mo layers on Pt(111) and Pt(100) electrodes has been studied to estimate the number of electrons involved in the electrochemical processes of spontaneously adsorbed Mo and the number of the bloc ked Pt sites for hydrogen adsorption. On Pt(111) and Pt(100) surfaces, the spontaneously adsorbed Mo layers showed redox peaks at 0.10 V and 0.15 V, respectively, and continuous current-potential waves in the conventional hydrogen region. Since the potential range of the Mo redox processes on both surfaces overlapped partially with the potential range of hydrogen adsorption, the variation in the ratio of the total charge of Mo and H ($Q_H$ +$Q_{MO}$) to the hydrogen charge of clean Pt electrode ($Q_H^0$) was analyzed. From the analysis, six electrons were estimated to be involved in the electrochemical processes of the spontaneously adsorbed Mo, and four Pt sites for hydrogen adsorption were calculated to be blocked by one adsorbed Mo atom. Based on these figures and the pH dependence of the Mo redox processes, we have proposed an electrochemical equation for the spontaneously adsorbed Mo. This electrochemical equation led us to conclude that the saturation coverage of the spontaneously adsorbed Mo is 0.25. The coverage of Mo less than 0.25, however, could not be determined voltammetrically due to the convolution of the charges of Mo and H.

The complex of iron(II) tris(3-Br-phen) (3-Br-phen; 3-bromo-1,10-phenanthroline) was prepared as a precursor of electropolymerization and the crystal structure of [Fe(3-Br-phen)3]($PF_6$)2${\cdot}$CH3CN with a distorted octahedral geometry has been investigated. The reductive electropolymerization of $>[Fe(3-Br-phen)3]^{2+}$ complex onto the surface of a glassy carbon electrode and indium tin oxide (ITO) optically transparent electrode were performed in acetonitrile at room temperature. Thin film of poly-$>[Fe(3-Br-phen)3]^{2+}$ formed was adherent, electroactive and stably deposited on a glassy carbon disk electrode. The thin metallopolymeric film formed was also confirmed by absorption spectroscopy.

Nine copper(Ⅱ) oxyanion, and mixed oxyanion complexes that have four- or five-coordinate geometries around copper(Ⅱ) centers were derived from sparteine copper(Ⅱ) dinitrate precursor [Cu($C_{15}$$H_{26}$N2)(NO3)2]. The precursor complex undergoes an anion exchange with various oxyanions, and an interchange reaction with other sparteine copper(Ⅱ) complexes. The [Cu($C_{15}$$H_{26}$N2)(CH3CO2)2] also undergoes "halogen atom abstraction" reaction with CCl4 to produce the mixed anion complex [Cu($C_{15}$$H_{26}$N2)(CH3CO2)Cl]. The whole set of prepared complexes has been used for the comparative electrochemical and spectroscopic studies.

The dielectric responses of 10 and 40 wt% siloxane-epoxy copolymers were investigated in temperature range near the glass transition of polydimethylsiloxane at which the dielectric transitions were also observed. On the other hand, the pure epoxy did not show any dielectric transition in measurement temperature range -90 to 150 $^{\circ}C.$ The experimental data showed that for the copolymer investigated, the temperature-frequency super-position principle could be applied to the dielectric response. From the Cole-Cole equation, the dielectric relaxation of the 10 wt% siloxane near the glass transition temperature resulted in a broad distribution with ${\beta}=$ 0.19 and the relaxation time at -70 $^{\circ}C$ was 5.3 ${\times}$ $10^{-2}$s. The glass transition temperature, 188 K, was estimated by using WLF relation, which was consistent with the data presented in experiment.

Comparison studies of the Quantitative Structure Activity Relationship (QSAR) methods with new imidazo-quinolinedione derivatives were conducted using Comparative Molecular Field Analysis (CoMFA), Comparative Molecular Similarity Indices Analysis (CoMSIA), and the Hologram Quantitative Structure Activity Relationship (HQSAR). When the CoMFA crossvalidation value, q2, was 0.625, the Pearson correlation coefficient, r2, was 0.973. In CoMSIA, q2 was 0.52 and r2 was 0.979. In the HQSAR, q2 was 0.501 and r2 was 0.924. The best result was obtained using the CoMSIA method according to a comparison of the calculated values with the real in vitro cytotoxic activities against human ovarian cancer cell lines.

Treatment of conjugated cyclodienes (5a-5c) with excess ozone in dichoromethane in the presence of added carbonyl compounds (3) resulted to give the corresponding diozonides 10 and cross-ozonides 14. Similarly, ozonolysis of the nonconjugated 1,4-cyclohexadiene (6a) and 1,5-cyclooctadiene (6b) under same conditions afforded both diozonides 20 and cross-ozonides 14. On the other hand, Ozonolysis of bicyclo[2.2.0]hepta-2,5-diene (6c) in the presence of 3A provided the corresponding diozonide 19.

A screen printed graphite electrode has been developed for a simple and sensitive determination of phenolic compounds in an aqueous solution. The electrode developed uses a simple and effective screen printing technique with ${\alpha}-Cyclodextrin({\alpha}-CD)$ modified graphite ink. Phenols were captured on the surface of the ${\alpha}-CD$ modified electrode through complex formation. The phenol/ ${\alpha}-CD$ complex was deposited and quantified electrochemically using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and square wave voltammetry (SWV). The optimization of the experimental parameters was performed in regard to electrode composition, pH, temperature, sample preconcentration time. Interferences from other organic compounds were investigated. The detection limit for phenols was 500 ${\pm}7$ nM for DPV, with the linear range of 0.5 ${\mu}M$ -25.0 ${\mu}M$ and 30 ${\pm}2$ nM for SWV, with the linear range of 30 nM - $50{\mu}M$, respectively.

Benomyl, one of the known endocrine disrupting chemicals, was analyzed to understand the fate in the nature. Water, sediment and biota samples are acidified to hydrolyze benomyl into carbendazim then followed by extraction and concentration. The concentrations of carbendazim in the samples were determined by liquid chromatography/time-of-flight mass spectrometer. Analysis data showed that certain amount of carbendazim was accumulated in sediment. On the contrary, no sign of accumulation in biota was observed probably due to the increased degradation rate in vivo. It is, however, that no one can claim carbendazim is not harmful to biota, since carbendazim may give a negative effect against organisms at the point of intaking.

A variety of 1,2,3-triazole derivatives bearing acyclic sugar moieties of DHPG and iso-NDG were synthesised by Diels-Alder reaction. None of the new compounds display any interesting biological activity.

We have presented the results of thermodynamic, structural and dynamic properties of liquid benzene, toluene, and p-xylene in canonical (NVT) ensemble at 293.15 K by molecular dynamics (MD) simulations. The molecular model adopted for these molecules is a combination of the rigid body treatment for the benzene ring and an atomistically detailed model for the methyl hydrogen atoms. The calculated pressures are too low in the NVT ensemble MD simulations. The various thermodynamic properties reflect that the intermolecular interactions become stronger as the number of methyl group attached into the benzene ring increases. The pronounced nearest neighbor peak in the center of mass g(r) of liquid benzene at 293.15 K, provides the interpretation that nearest neighbors tend to be perpendicular. Two self-diffusion coefficients of liquid benzene at 293.15 K calculated from MSD and VAC function are in excellent agreement with the experimental measures. The self-diffusion coefficients of liquid toluene also agree well with the experimental ones for toluene in benzene and for toluene in cyclohexane.

In this paper we have presented the results of thermodynamic, structural, and dynamic properties of model systems for liquid benzene, toluene and p-xylene in an isobaric-isothermal (NpT) ensemble at 283.15, 303.15, 323.15, and 343.15 K using molecular dynamics (MD) simulation. This work is initiated to compensate for our previous canonical (NVT) ensemble MD simulations [Bull. Kor. Chem. Soc. 2001, 23, 441] for the same systems in which the calculated pressures were too low. The calculated pressures in the NpT ensemble MD simulations are close to 1 atm and the volume of each system increases with increasing temperature. The first and second peaks in the center of mass g(r) diminish gradually and the minima increase as usual for the three liquids as the temperature increases. The three peaks of the site-site gC-C(r) at 283.15 K support the perpendicular structure of nearest neighbors in liquid benzene. Two self-diffusion coefficients of liquid benzene via the Einstein equation and via the Green-Kubo relation are in excellent agreement with the experimental measures. The self-diffusion coefficients of liquid toluene and p-xylene are in accord with the trend that the self-diffusion coefficient decreases with increasing number of methyl group. The friction constants calculated from the force auto-correlation (FAC) function with the assumption that the fast random force correlation ends at time which the FAC has the first negative value give a correct qualitative trends: decrease with increase of temperature and increase with the number of methyl group. The friction constants calculated from the FAC's are always less than those obtained from the friction-diffusion relation which reflects that the random FAC decays slower than the total FAC as described by Kubo [Rep. Prog. Phys. 1966, 29, 255].

Furo[3,2-h]quinoline derivatives were synthesized as a gastric $H^+$/$K^+$-ATPase inhibitors. The oxycyclization of 7 and 8-positions in quinoline potentiated the inhibitory activity, while no significant changes in biological activity were observed by the variation of substituents in furan ring. The several furo[3,2-h]quinoline derivatives were worthy of in vivo investigation for their anti-secretory and anti-ulcer activity.

Literature data measured by the author have been processed to report on the effect of solute structure on gas liquid partition coefficients of eleven normal, branched and cyclic alkanes ranging in carbon number from five to nine in sixty nine low molecular weight liquids. The alkane solutes are n-pentane(p), n-hexane(hx), n-heptane(hp), n-octane(o), n-nonane(n), 2-methylpentane(mp), 2,5-dimethylpentane(dp), 2,5-dimethylhexane(dh), 2,3,4-trimethylpentane(tp), cyclohexane(ch), and ethylcyclohexane(ec). The solvent set encompasses most of those studied by Rohrschneider as well as three homologous series of solvents (n-alkanes, 1-alcohols and 1-nitriles) and several perfluorinated alkanes and highly fluorinated alcohols. An excellent linear relationship was observed between lnK and the carbon number of n-alkanes. The effective carbon numbers of branched and cyclic alkanes were determined in a similar fashion to the method of Kovats index. We found that the logarithm of solute vapor pressure multiplied by solute molar volume was a perfect descriptor for the linear relationship with the median effective carbon number.

Photocrosslinkable soluble polyimide and polymethacrylate compound were synthesized for studying the optically induced anisotropy of the thin films. Chalcone group was introduced into the side chain unit of two polymers. We observed a photodimerization behavior between the double bonds in the chalcone group and an optical anisotropy of these materials by irradiation of a linearly polarized UV light (LPL). Optical anisotropy of the thin film was also investigated by using polarized UV absorption spectroscopy. The dynamic property of optical anisotropy in photoreactive polyimide was compared to that in polymethacrylate containing chalcone group in the side chain.

A new microporous TiO2-pillared layered titanate has been successfully prepared by hybridizing the exfoliated titanate with the anatase TiO2 nano-sol. According to the X-ray diffraction analysis and N2 adsorption-desorption isotherms, the TiO2-pillared layered titanate showed a pillar height of ~2 nm with a high surface area of ~460 m2/g and a pore size of ~0.95 nm, indicating that a microporous pillar structure is formed. Its photocatalytic activity was evaluated by measuring the photodegradation rate of 4-chlorophenol during irradiation of catalyst suspensions in an aqueous solution. An enhancement in activity of ca. 170% was obtained for TiO2-pillared layered titanate compared to that of the pristine compound such as layered cesium titanate.

A selective enzyme-linked immunosorbent assay (ELISA) for the insecticide chlorpyrifos was developed. Four haptens for chlorpyrifos were synthesized and two of them were used as immunogens after coupling to keyhole limpet hemocyanin by two differe nt approaches. Rabbits were immunized with either of them and the sera were screened against 4 haptens coupled to ovalbumin (OVA). Using the sera of highest specificity, an antigencoated ELISA was developed, which shows an I50 of 160 ppb with a detection limit of 10 ppb. An antibody-coated ELISA was also developed, which shows an $I_{50}$ of 20 ppb with a detection limit of 0.1 ppb. The antibodies showed negligible cross-reactivity with other organophosphorus pesticides except for insecticides chlorpyrifos-methyl and bromophos-ethyl, which makes these assays suitable for the selective detection of chlorpyrifos.

SPME techniques have proven to be very useful tools in the analysis of wide VOCs in the air. In this study, we estimated VOCs in ambient and workplace air using a Tedlar ba /SPME/GC/MS system. The calibration curve was set to be linear over the range of 1-30 ppbv. The detection limits ranged from 10 pptv to 0.93 ppbv for all VOCs. Reproducibility of TO-14 target gas mixtures by SPME/GC/MS averaged at 8.8 R.S.D (%). Air toxic VOCs (hazardous air pollutants, HAPs) containing a total of forty halohydrocarbons, aromatics, and haloaro-matic carbons could be analyzed with significant accuracy, detection limit and linearity at low ppbv level. Only reactive VOCs with low molecular weight, such as chloromethane, vinylchloride, ethylchloride and 1,2-dichloro-ethane, yielded relatively poor results using this technique. In ambient air samples, ten VOCs were identified and quantified after external calibration. VOC concentration in ambient and workplace air ranged from 0.04 to 1.85 ppbv. The overall process was successfully applied to identify and quantify VOCs in ambient/workplace air.