Syn (or anti) cinnamaldehydeoxime (1a, b) undergoes Diels-Alder addition to tetrabromo-p-benzoquinone (2)in dry xylene in 1 : 1 and 2 : 1 molar ratios to give the mono- and diadducts 3 and 4a, b respectively. The reaction of 3 with thioamides in ethanol gave thiazoloquinoline diones 6a-d, whereas with acid amides in ethylene glycol, it gave oxazoloquinolinediones 12a-f.

2-Aminoethanethiol (aet) has been used to make self-assembled monolayer (SAMs) on gold electrodes, which are subsequently modified with 3,4-dihydroxy phenylalanine (dpa). Such modified electrodes having various types of Au/aet-dpa were employed in the electrocatalytic oxidation of NADH. The purpose of this study to characterize the responses of such modified electrodes in terms of the immobilization procedure, pH of the solution and applied potential. The reaction of the surface immobilized dpa with NADH was studied using the rotating disk electrode technique and a value of $2.2{\times}10^4M^{-1}s^{-1}$ was obtained for the second-order rate constant in 0.1 M Tris/$NO_3^-$buffer (pH=8.0). The hydration behavior of the films was characterized by quartz crystal microbalance. When used as a NADH sensor, the Au/aet-dpa electrode exhibited good sensitivity and an excellent correlation (r ${\geq}$ 0.99) for NADH concentration which extended to $3.8{\times}10^{-3}$ M.

The binding of cethyl trimethylammonium bromide, (CTAB) with human serum albumin (HSA) has been investigated at 5 mM phosphate buffer pH 7.0, 27 $^{\circ}C$ and various ionic strength using ion selective membrane electrodes. This method is faster and much more accurate than equilibrium dialysis technique, so provides sufficient and accurate data for binding data analysis. A novel and simple method was introduced for resolution and characterization of binding sets on basis of binding capacity concept. The values of Hill binding parameters were estimated for each set and used for calculation of intrinsic binding affinity. The results interpreted on basis of nature of forces which interfered in the interaction and represent the existence of three and two binding sets for binding of CTAB at $10^{-4}$ and $10^{-3}$ M of NaBr, respectively.

The structure of [Cu(tpen)]$(ClO_4)_2$ (tpen = N,N,N',N'-tetrakis(2-pyridylmethyl)-1,2-ethanediamine) has been identified by X-ray crystallography. The copper(II) ion is surrounded by two amine N atoms and three pyridine N atoms of the ligand, making a distorted trigonal-bipyramid. Among the six potential N donor atoms (two amine N and four pyridine N atoms), only one pyridine N atom remains uncoordinated. We examined structural changes on addition of $Cl^-$ to $[Cu(tpen)]^{2+}$(1). The addition of $Cl^-$ in methanol resulted in the formation of a novel dinuclear copper(II) complex $[Cu_2Cl_2(tpen)](ClO_4)_2{\cdot}H_2O$. The structure of the dinuclear complex was verified by X-ray crystallography. Each copper(II) ion in the dinuclear complex showed a distorted square planar geometry with two pyridine N atoms, one amine N atom and one $Cl^-$ ion.

In this work, the fundamental study of on-line monitoring of $SiO_2$ particles in the size range of 40 nm to 725 nm was carried out using turbidimetry. The size of particle was measured using a field emission scanning electron microscope (FE-SEM). The factors affecting on the turbidity were discussed, for example, wavelength, size, and concentration. In order to observe the dependence of turbidity on the wavelength, a turbidimetric system equipped with charged coupled detector (CCD) was built. The shape of the transmitted peak was changed and the peak maximum was shifted to the red when the concentration of particle was increased. This result indicates that the turbidity is related to the wavelength, which corresponds to the characteristic of the Mie extinction coefficient, Q, that is a function of not only particle diameter and refractive index but also wavelength. It is clear that a linear calibration curve for each particle in different size can be obtained at an optimized wavelength.

A gas chromatography/mass spectrometric assay method has been developed for the simultaneous determination of icing inhibitors, ethylene glycol monomethyl ether and diethylene glycol monomethyl ether in ground water contaminated with JP-8. Ethylene glycol monobutyl ether and ethylene glycol monoethyl ether were used as the internal standard and surrogate, respectively. 100 mL of ground water was extracted twice with 20 mL of methylene chloride. The extract was concentrated to dryness, dissolved with 100 ${\mu}$L of methanol and analyzed by GC-MS (SIM). The use of an Innowax column gave the peaks good chromatographic properties, and the extraction of these compounds from samples gave recoveries of about 50% with small variations. The method detection limits of the target compounds were in a range of 0.5-0.8 ng/mL in ground water.

Complexation reactions of nitrilotriacetate (NTA) and penicillamine with $Cu^{2+}$ and $Co^{2+}$ have been studied in solution phase using paper electrophoresis technique. The stability constants of the complexes Cu(II)-nitrilotriacetate-penicillamine and Co(II)-nitrilotriacetate-penicillamine have been found to be $6.64{\pm}0.03\;and\;5.86{\pm}0.05$ (logarithm stability constant values), respectively at 35$^{\circ}C$ and ionic strength 0.1 M.

A systematic study of microbial fuel cells comprised of thermophilic Bacillus licheniformis and Bacillus thermoglucosidasius has been carried out under various operating conditions. Substantial amount of electricity was generated when a redox mediator was used. Being affected by operation temperature, the maximum efficiency was obtained at 50$^{\circ}C$ with an open circuit voltage of ca. 0.7 V. While a small change around the optimum temperature did not make much effect on the cell performance, the rapid decrease in performance was observed above 70$^{\circ}C$. It was noticeable that fuel cell efficiency and discharge pattern strongly depended on the kind of carbon sources used in the initial culture medium. In the case of B. thermoglucosidasius, glucose alone was utilized constitutively as a substrate in the microbial fuel cell irrespective of used carbons sources. When B. licheniformis was cultivated with lactose as a carbon source, best charging characteristics were recorded. Trehalose, in particular, showed 41.2% coulombic efficiency when B. thermoglucosidasius was cultured in a starch-containing medium. Relatively good repetitive operation was possible with B. thermoglucosidasius cells up to 12 cycles using glucose as a carbon source, when they were cultured with lactose as an initial carbon source. This study demonstrates that highly efficient thermophilic microbial fuel cells can be constructed by a pertinent modulation of the operating conditions and by carefully selecting carbon sources used in the initial culture medium.

Protonation constants of calix[4]-cyclen-benzo-crown-6, L in 1X$10^{-2}$ M $Bu_4NCF_3SO_3$ in 40% $CH_2Cl_2/CH_3OH$ at $25^{\circ}C$ determined by potentiometric titration are log $K_1$ = 10.91, log $K_2$ = 10.30, log $K_3$ = 6.24 and log $K_4$ = 2.55. Stability constants for the receptor L complexes with Cu(II) and Zn(II) in 1X$10^{-2}$ M $Bu_4NCF_3SO_3$ in 40% $CH_2Cl_2/CH_3OH$ at $25^{\circ}C$ were determined by UV-VIS spectrometric titration. Stability constants of the CuL and ZnL complexes as log $\beta$ are 4.37 and 3.45, respectively. Stabilization energies for protonations of receptor L, derived from ab initio Hartree-Fock method with 6-31G basis set, are ${\Delta}E_1$ = -290.1, ${\Delta}E_2$ = -205.0, ${\Delta}E_3$ = -124.9 and ${\Delta}E_4$ = -26.9 kcal/mol and complexation energy of ZnL complex is -370.3 kcal/mol.

The crystal structures of sparteinium tetrachlorocuprate monohydrate $[(C_{15}H_{28}N_2)CuCl_4{\cdot}H_2O]$, 1 and sparteinium tetrabromocuprate monohydrate $[(C_{15}H_{28}N_2)CBr_4{\cdot}H_2O]$, 2, were determined. The structures of 1 [orthorhombic, $P2_12_12_1$, a = 8.3080(10) ${\AA}$, b = 14.6797(19) ${\AA}$ and c = 16.4731(17) ${\AA}$], and 2 [orthorhombic, $P2_12_12_1$, a = 8.4769(7) ${\AA}$, b = 15.166(3) ${\AA}$ and c = 16.679(3) ${\AA}$], are composed of a doubly protonated sparteinium cation, $[C_{15}H_{28}N_2]^{2+}$, a discrete $CuX_4^{2-}$ anion $(X=Cl^-\;or\;Br^-)$, and one water molecule. These monomeric compounds are stabilized through various types of hydrogen bonding interaction in their packing structures. Crystal 2 exhibits weak anti-ferromagnetism (J = -3.24 $cm^{-1}$) as opposed to the magnetically isolated paramagnetism observed for 1. The results of comparative magneto-structural investigations of 1 and 2 suggest that the pathway for the weak anti-ferromagnetic super-exchange in 2 might be through a Cu-Br${\cdots}$Br-Cu contact.

The pure product of 2,3-diaminophenazine was prepared by the enzyme-catalyzed reaction of ophenylenediamine-$H_2O_2$-horseradish peroxidase and characterized by UV/Vis spectroscopy, IR spectroscopy and NMR spectroscopy. The electrochemical behaviour of 2,3-diaminophenazine on the glassy carbon electrode was studied. The interaction between 2,3-diaminophenazine and deoxyribonucleic acid was studied by cyclic voltammetry method and UV/Vis spectroscopy, which indicated that the interaction between them is intercalation. The influence of reacting time was also studied. The binding ratio of the 2,3-diaminophenazine-DNA complex is calculated to be 1 : 2 and the binding constant is to be $5.07{\times} 10^3L{\cdot}mol^{-1}$ at room temperature.

DeniLite$^{TM}$ laccase immobilized platinum electrode was used for amperometric detection of hydroquinone (HQ) and homogentisic acid (HGA) by means of substrate recycling. In case of HQ, the obtained sensitivity is 280 nA/ ${\mu}$M with linear range of 0.2-35 ${\mu}$M ($r^2$ = 0.998) and detection limit (S/N = 3) of 50 nM. This high sensitivity can be attributed to chemical amplification due to the cycling of the substrate caused by enzymatic oxidation and following electrochemical regeneration. In case of HGA, the obtained sensitivity is 53 nA/ ${\mu}$M with linear range of 1-50 $[\mu}M\;(r^2$ = 0.999) and detection limit of 0.3 ${\mu}$M. The response times ($t_{90%}$) are about 2 seconds for the two substrates and the long-term stability is 60 days for HQ and around 40-50 days for HGA with retaining 80% of initial activities. The very fast response and the durable long-term stability are the principal advantages of this sensor. pH studies show that optimal pH of the sensor for HQ is 6.0 and that for HGA is 4.5-5.0. This shift of optimal pH towards acidic range for HGA can be attributed to the balance between enzyme activity and accessibility of the substrate to the active site of the enzyme.

Amyloid peptide (A${\beta}$) is the major component of senile plaques found in the brain of patient of Alzheimer's disease. ${\beta}$-amyloid peptide (25-35) (A${\beta}$25-35) is biologically active fragment of A${\beta}$. The three-dimensional structure of A${\beta}$25-35 in aqueous solution with 50% (vol/vol) TFE determined by NMR spectroscopy previously adopts an ${\alpha}$-helical conformation from $Ala^{30}$ to $Met^{35}$. It has been proposed that A${\beta}$(25-35) exhibits pH- and concentration-dependent ${\alpha}-helix{\leftrightarrow}{\beta}$sheet transition. This conformational transition with concomitant peptide aggregation is a possible mechanism of plaque formation. Here, in order to gain more insight into the mechanism of ${\alpha}$-helix formation of A${\beta}$25-35 peptide by TFE, which particularly stabilizes ${\alpha}$-helical conformation, we studied the secondary-structural elements of A${\beta}$25-35 peptide by molecular dynamics simulations. Secondary structural elements determined from NMR spectroscopy in aqueous TFE solution are preserved during the MD simulation. TFE/water mixed solvent has reduced capacity for forming hydrogen bond to the peptide compared to pure water solvent. TFE allows A${\beta}$25-35 to form bifurcated hydrogen bonds to TFE as well as to residues in peptide itself. MD simulation in this study supports the notion that TFE can act as an ${\alpha}$-helical structure forming solvent.

Pt nanoparticles loaded on alumina through an impregnation at room temperature was prepared using $K_2PtCl_4$ and acrylic acid as capping material. Transmission electron microscopy showed that the deposited Pt particles indicate ca. 80% cubic shapes with a narrow distribution of 8-10 nm in size. Propylene hydrogenation over the catalyst has been carried out to evaluate their catalytic performance by the values of activation energy. It is determined from the initial rate, reaction order, and rate constant and is found to be $9.7{\pm}0.5$ kcal/mol. This value has been discussed by comparing to those of encapsulated- and truncated octahedral Pt nanoparticles deposited on alumina, respectively, to study influence of the particle size and shape, and capping material used on the activation energy.

The complexation characteristics of tetramethyl (1) and tetraethyl esters (2) of p-tert-butylcalix[4]arene with alkali metal cations have been investigated by ab initio calculation. The structures of endo- or exocomplexation of the hosts in cone conformation with alkali metal ions have been optimized using HF/6-31G method followed by B3LYP/6-31G(d) single point calculation. B3LYP/6-31G(d) calculations suggest that exo-complexation efficiencies of sodium ion to the cavity of lower rim of hosts 1 and 2 are 27.1 and 25.8 kcal/mol better than that of potassium ion, respectively. The exo-complexation efficiencies of potassium ion to the cavity of lower rim of hosts 1 and 2 are 33.3 and 31.5 kcal/mol better than the endo-complexation inside the upper rim (four aromatic rings) as expected from the experimental results. B3LYP/6-31G(d) calculation of the ethyl ester 2 shows 29.5 and 30.8 kcal/mol better exo-complexation efficiency for both sodium and potassium ions than the methyl ester 1.

Crystal structures of lanthanide complexes with NTA (NTA = nitrilotriacetate) are reported. The complexes of $[Ln(NTA)_2{\cdot}H_2O]^{3-}$ (Ln = Sm, Eu, Gd, Tb and Ho) crystallize in the orthorhombic space group Pccn. In the structures, the trivalent lanthanide ions are completely encapsulated via coordination to the two nitrogen atoms and the six carboxylate oxygen atoms of the two NTA ligands, and one water oxygen atoms. The complexes form a slightly distorted capped-square-antiprism polyhedron. Of the complexes, $[Eu(NTA)_2{\codt}H_2O]^{3-}$,\;[Tb(NTA)_2{\cdot}H_2O]^{3-}\;and\;[Dy(NTA)_2{\cdot}H_2O]^{3-}$ excited at the 325 He-Cd line produce very characteristic luminescence features, arising mostly from the f ${\to}$ f transitions. The absolute quantum yields of these complexes are determined at room temperature. Surprisingly, the $[Dy(NTA)_2{\cdot}H_2O]^{3-}$ complex is more luminescent than the $[Eu(NTA)_2{\cdot}H_2O]^{3-}\;and\;[Tb(NTA)_2{\cdot}H_2O]^{3-}$ complexes.

The solid solutions of the $Sr_{1-x}Ba_xFeO_{3-y)$ system (x = 0.0, 0.1, 0.2 and 0.3) having a perovskite structure were prepared in air at 1423 K and then heat-treated in air (A), $O_2(O)\;and\;N_2(N)$ to examine possibility of controlling the nonstoichiometry and applicability as an additive for electrical conducting inorganic adhesives (ECIA). In the samples heated in $N_2$ stream, there existed almost no $Fe^{4+}$ ions, and at constant temperature their electrical conductivities were considerably lower than those of the samples heat-treated in air or $O_2.\; Sr_{0.8}Ba_{0.2}Fe^{3+}_{0.49}Fe^{4+}_{0.51}O_{2.76}$ (SB2-A) whose $Fe^{3+}/Fe^{4+}$ ratio was nearly 1 (0.96) and whose conductivity values (1.04 $ohm^{-1}cm^{-1}$ at 283 K and 1.88 $ohm^{-1}cm^{-1}$ at 673 K) were higher than any other samples, was found to be the best additive for ECIA.

Aldehydes and ketones were converted to their corresponding acetals in the presence of silica-bound sulfuric acid in n-hexane under mild and heterogeneous conditions with excellent yields.

Newly synthesized 8-hydroxyquinoline based benzothiazole derivative 2 showed a distinctive $Hg^{2+}$-selectivity over other transition metal ions in aqueous solution. The fluorescence emission at 455 nm of 2 was completely quenched upon interaction with $Hg^{2+}$ ions in dioxane-$H_2O$ system (9 : 1, v/v). The selectivity was decreased in the order of $Hg^{2+}\;>>\;Cu^{2+}\;>\;Cd^{2+}\;>\;Pb^{2+}\;{\thickapprox}\;Zn^{2+}\;{\thickapprox}\;Ni^{2+},\;and\;Hg^{2+}$ concentration dependent fluorescence quenching profile was observed in the presence of common interfering metal ions as background. The fluorescence behavior of 2 suggests that the prepared compound could be used as a fluorescent signaling subunit for the construction of new $Hg^{2+}$-sensitive ON-OFF type supramolecular switching systems.

The relationship between the behaviors of c.c.lipase back-extraction and their percolation phenomena by using AOT reverse micellar systems (RVMS) has been studied by the addition of a small amount of additives to organic phase such as thiols and nonionic-surfactants focusing on micelle-micelle interactions. The values of ${\beta}_t$ defined by the variation of percolation processes and back-extraction behaviors of c.c.lipase have a good linear correlation. The hydrophobicity of additive molecules suppressing the cluster formation of reverse micelles (high values of ${\beta}_t$) improved the back-extraction behavior of c.c.lipase. The back-extraction fraction and its rate of c.c.clipase are increased with decreasing of the value of hydrophilic lipophilic balance (HLB) and increasing of the hydrophobicity per additive molecules added to reverse micellar systems (RVSM) in the same additives concentration.

Revered-phase LC-electrospray ionization mass spectrometry was used to selectively determine enalapril from plasma with minimal sample preparation. Detection limit of the method was 1 ng/mL. Precision (within day and between days) and accuracy of the method at various concentrations were acceptable. The analytical technique was used for pharmacokinetic studies after administration of enalapril to human test subjects.

By applying a catalytic amount of indium trichloride, regioselective ring-opening of epoxides to ${\beta}$-hydroxy ethers was established. While the alcoholysis of styrene oxides produed $S_N1$-type product, the alcoholysis of ${\alpha}$-heteroatom-substituted epoxides predominantly produced $S_N2$-type product.

Polyaddition reactions of 1,1-diethynyl-3-triethylsilyl-1-silacyclopent-3-ene with several organoborane derivatives have afforded the oligomeric materials containing organosilacyclic group and organoboron moiety along the oligomer main chains. All of these materials are soluble in THF as well as chloroform, and their molecular weights are in the range of 1,990/1,190-21,950/7,050 ($M_w/M_n$) with the polydispersity indexes of 1.67-3.43. The prepared oligomers are characterized by several spectroscopic methods such as $^1H,\;^{13}C, \;^{29}Si,\;^{11}B$ NMR and FTIR spectra along with elemental analysis. FTIR spectra of all the oligomers show that the new strong C=C stretching frequencies appear at 1599-1712 $cm^{-1}$, in particular. The UV-vis absorption spectra of the materials in THF solution exhibit the strong absorption bands at the ${\lambda}_{max}$ of 268-275 nm. The oligomeric materials show that the strong excitation peaks appear at the ${\lambda}_{max}$ of 255-279 nm and the strong fluorescence emission bands at the ${\lambda}_{max}$ of 306-370 nm. All the spectroscopic data suggest that the obtained materials contain both the organoboron ${\pi}$-conjugation moiety of C=C-B-C=C and the organosilacyclic group of 3-triethylsilyl-1-silacyclopent-3-ene along the oligomer main chains. The oligomers are thermally stable up to 162-200 $^{\circ}C$ under nitrogen.

We have designed a new family of radioligands, 3-(amino- and hydroxymethyl)-4-(5-iodopyridin-2-ylthio)indoles, combining characteristically distinct moieties proven to impart successful binding ability in a variety of structurally diverse selective serotonin reuptake inhibitors recently published. Described in this article are the syntheses of 3-substituted 4-(5-iodopyridin-2-ylthio)-indoles, featuring successful adaptation of the modified Leimgruber-Batcho indole synthesis onto the key intermediate 1-(5-iodopyridin-2-ylthio)-2-methyl-3-nitrobenzene (6) prepared from the nucleophilic aromatic substitution of chloropyridine 7 with thiophenol 8.

An RPLC-postcolumn detection method has been developed for the fluorimetric determination of dichloroacetamide (DCAD) in water. After ammonia and DCAD were separated on a $C_{18}$ nonpolar stationary phase with 2.5% methanol-0.02 M phosphate buffer at pH 3, the column eluant was reacted with post column reagents, o-phthaldialdehyde (OPA) and sulfite ion at pH 11.5, to produce a highly fluorescent isoindole fluorophore, which was measured with a fluorescence detector ( ${\lambda}_{ex}$ = 363 nm, ${\lambda}_{em}$ = 425 nm). With the optimized conditions for RPLC and the postcolumn derivatization, the calibration curve was found to be linear in the concentration ranges of 0.5 and 20 ${\mu}$M for DCAD, and the detection limit for DCAD was 0.18 ${\mu}$M (23${\mu}$g/L). This corresponded to 18 pmol per 100 ${\mu}$L injection volume for a signal-to-noise ratio of 3, and the repeatability and reproducibility of this method were 1.0% and 2.5% for five replicate analyzes of 2 ${\mu}$M DCAD, respectively. The degradation yields DCAD to ammonia were 94 and 99%, and the percent recoveries of DCAD from 4 and 6 ${\mu}$M DCAD-spiked tap water were shown mean more than 97%.