Hydropalladium carboxylates, formed from π-allylpalladium chloride dimer plus carboxylic acids, have been shown to catalyze cyclization of structurally diverse enediynes to form the corresponding six- or five-membered rings depending upon the reaction conditions. Some enediynes having an Oxygen linker in an appropriate position under the similar condition yielded the corresponding cyclopropanation products in highly stereoselective manner. A study using deuterated formic acid has proven that the alkylpalladium intermediates formed in our conditions were reduced by the pendant formate ligand. The dienediyne 10 yielded only the tricyclic product 12 in 67% yield, although it was expected to frrm the cyclic product 11. All these cyclizations seemed to occur via the corresponding alkylpalladium intermediates I. which could proceed to the corresponding cyclic products depending on the reaction conditions and the substrates. The study using ceuterated formic acid could provide an important information to understand the present cyclization mechanism. Overall the present study could play an important role in developing new synthetic methodologies for constructing complex polycyclic compounds.

Studies have been carried out on the unusual molecular nonrigidity of CoⅢ(PymS)3 and Cp* RhⅢ(PymS)2(PymS:2-mercaptopyrimidine). The crystal structure of CoⅢ(PymS)3 approximates to an octahedral mer isomer with 4-membered N-Schelating fashion. For Cp*RhⅢ(PymS)2, one PymS ligand bonds to the rhodium ion in an S-monodentate mode (Rh-S(2) = 2.366(1)Å) while the other ligand chelates to the metal ion in an N,S-bidentae mode (Rh-S(1)=2.414(1);Rh-N(1)=2.103(3)Å). Even though the conformations and configurations of both complexes are still retained in solution, an unusual nonrigidity for the protons of the PymS region is obsered in the solution. The broad proton signals of CoⅢ(PymS)3 exhibit a temperature-dependence in the range of -40∼40℃ with a free energy of activation ΔG=64.49kJ/mol(40℃). For Cp*RhⅢ(PymS)₂,such a fluxionality has been markedly observed in solution. This fluxional behavior can be explained in terms of "ligand tautomerism" in metal complexes containing potential tautomeric forms.

The effects of anthryl derivatives and 9-aminoacridine on the thermal melting profile of a poly(dA)[poly(dT)]₂triplex were compared 9-Aminoacridine stabilizes the triplex far more effectively than anthryl derivatives. The absorption and CD and LD spectroscopic characteristics of anthryl derivatives are similar to those of 9-aminoacridine when complexed with the triplex; the N atom of acridine, which can act as a hydrogen bond acceptor, plays an important role in triplex stabilization.

The variation of Jahn-Teller(J-T) distortion imposed on various metallo- tetraphenylporphyrins(MTPPS;M=ZnⅡ,PdⅡ,PtⅡ,and RhⅢ) has been investigated by time-resolved resonance Raman spectroscopy. B1g and B2g modes of the triplet(π,π*) states for the heavy-metal porphyrins exhibit the enhancement of their intensities compared with those of 3ZnⅢTPP, while the enhancement of phenyl internal mode is reduced. These results suggest that the J-T distortion becomes manifest as the metal size increases, and consequently the porphyrin-to-phenyl ring charge transfer in the excited triplet state is inhibited.

The 4-methylene-1,3-dioxolane(4-MDO) derivatives with dimethoxyphenyl group on the 2-position of 1,3-dioxolane ring, 2-(x,y-dimethoxyphenyl)-4-MDO derivatives (x,y=2,3(1b), 2,4(2b), 2,5(3b) and 3,4(4b)) were prepared by acelalizationof the corresponding benzaldehyde with 3-chloro-1,2-propanediol, followed by dehydrochlorination. 2-(Dimethoxy)phenyl-4-MDO derivatives underwent polymerization wiht ring opening as will as cyclization reaction to afford a mixture of the ring-opened polymer and 3(2H)-dihydrofuranone derivative with boron trifluoride as a cationic catalyst. Both the methylene group and 1,3-dioxolane ring were participated in the reaction with cationic catalyst. The key intermediate of the polymerization is a benzyl cation generated by ring opening, and the cyclization reaction proceed via proton addition to oxygen atom of 1,3-dioxolane ring.

A series of the para-substituted 7-aryl-norbornadienyl cation (3) was prepared in FSO3H/SO2ClF solution at -100℃ and their 13C NMR shifts were measured at -80℃. The plots of the chemical shifts (changes in chemical shifts) of cationic carbon, ΔδC+, aganist our calculated new substituent constant, σc+s, gave an excellent correlation (r=0.994), with a ρc+ value of 12.63. These results indicate that the new substituent constants, σc+s, can be successfully employed to compare the relative charge demand of the carbonium ion by π-and πσ-participation.

Gas-Permeable polymeric membranes containing carboxyl groups which are suitable for enzyme immobilization were investigated in order to use them as gas electrode membranes in biosensors. Carboxylated polyurethane (CPU) was synthesized via a reaciton between 2,2-bis(hydroxymethyl)propionic acid as a chain extender and prepolymers prepared from polycarprolactone(Mn=2,000) and 4,4'-diphenylmethane diisocynate. It was difficult to prepared membranes from the pure CPU because of its high elasticity and cohesion. However, transparent free-standing membranes were easily prepared from the blend solution of CPU and carboxylated poly(vinyl chloride)(CPVC) in tetrahydrofuran. Both elasticity and cohesion of the CPU/CPVC membranes were decreased with increasing the content of CPVC. DSC experiment suggests that CPU and CPVC may be well mixed. Permeability coefficients for O₂and CO₂(Po₂and Pco₂)in the membranes increased as the proportion of CPU increased. The addition of dioxtyl phthalate(DOP), a plasticizer, significantly enhanced the Po₂and Pco₂which were 4,4 and 30 barrer, respectively, in the CPU/CPVC(80/20 wt/wt) membranes containing 20% of DOP at 25℃ and 100psi. Thus this type of membranes may have a potential for the use as gas electrode membranes in biosensors.

Conjugated polycarbosilanes with diacetylene and aromatic groups of thiophene or phenylene simultaneously present in the polymer backbone such as poly[[1,4-bis(thiophenyl)buta-1,3-diyne]-alt-(dimethylsilane)], poly[[1,4-bis(thiophenyl)buta-1,3-diyne]-alt-(diphenylsilane)], poly[[1,4-bis(phenyl)buta-1,3-diyne]-alt-(dimethylsilane)],and poly[[1,4-bis(phenyl)buta-1,3-diyne]-alt-(diphenylsilane)] have been prepared. The characteristic C=C stretching frequencies appear at 2177-2179㎝-1 in the IR spectra of the polymers. The molecular weights of these polymers were detemined by GPC. All of these materials are soluble in organic solvents such as THF and chloroform, and thermally stable up to 200℃ in general without any weight loss under nitrogen. The prepared materials in THF solvent show a maximum absorption peak in the range of 334-356 nm with a molar absorptivity of 10³∼10ⁿ(n=5)L/(cm·mol) in the UV-visible absorption spectra. A maximum emission peak in the range of 403-550 nm is also observed in the fluorescence emission spectra. Both absorption and emission spectra strongly indicate that the obtained polycarbosilanes contain the new conjugated systems along the polymer main chain.

In deuterium NMR spectra of phosphatidylethanolamine bilayers with an extremely high content of saturated fatty acids, each C1 deuteron of the glycerol backbone gave rise to a doublet. This suggests the presence of two backbone conformations, the exchange between which is slow on an NMR time scale. The origin of the two conformations has been investigated in this work using saturated 1,2-diacyl-sn-glycero-3-phosphoethanolamine specifically deuterated in the glycerol backbone. The results showed that the two conformations originate from different domains, which have different fatty acid compositions. The differential scanning calorimetry of the bilayers suggested that the size of the domain is not large enough to show an independent phase transition. Thus, the formation of microdomains in the phosphatidylethanolamine bilayers has been concluded. Conformational difference in different domains was shown to be restricted to the C1 position of the glycerol backbone. The microdomains of phosphatidylethanolamine were retained even in the presence of other phospholipids.

Supercritical fluid extraction (SFE), ultrasonic extraction (USE), and accelerated solvent extraction (ASE) were compared with the well known Soxhlet extraction for the extraction of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins(PCDDs) from the XAD-2 resin which was used to adsorb PCDDs in the atmosphere. XAD-2 resin spiked with five PCDDs was chosen as a sample. The optimum conditions for the extraction of PCDDs by SFE were turned out to be the use of CO2 modified with 10% toluene at 100 ℃ and 350 atm, with 5 min static extraction followed by 20 min dynamic extraction. SFE gave a good extraction rate with good reproducibility for PCDDs ranging from 68 to 98%. The ultrasonic extraction of PCDDs from XAD-2 was investigated and compared with other extractions. A probe type method was compared with a bath type. Two extraction solvents, toluene and acetone were compared with their mixture. The use of their mixture in probe type, with 9 minutes of extraction time, was found to be the optimum condition. The average recovery of the five PCDDs for USE was 82-93%. Accelerated solvent extraction (ASE) with a liquid solvent, a new technique for sample preparation, was performed under elevated temperatures and pressures. The effect of tem-perature on the efficiency of ASE was investigated. The extraction time for a 10 g sample was less than 15 min, when the organic solvent was n-hexaneacetone mixture (1 : 1, v/v). Using ASE, the average recoveries of five PCDDs ranged from 90 to 103%. SFE, USE, and ASE were faster and less laborious than Soxhlet extraction. The former three methods required less solvent than Soxhlet extraction. SFE required no concentration of the solvent extracts. SFE and ASE failed to perform simultaneous parallel extractions because of instrumental limitations.

A method has been developed for the determination of trace anion impurities in concentrated hydrogen peroxide. The method involves on-line decomposition of hydrogen peroxide, ion chromatographic separation and subsequent suppressed-type conductivity detection. H2O2 is decomposed in Pt-catalyst filled Gore-Tex membrane tubing and the resulting aqueous solution containing analytes is introduced to the injection valve of an ion chromatograph for periodic determinations. The oxygen gas evolving within the membrane tubing escapes freely through the membrane wall causing no problem in ion chromatographic analysis. Decomposition efficiency is above 99.99% at a flow rate of 0.4mL/min for a 30% hydrogen peroxide concentration. Analytes are quantitatively retained. The analysis results for several brands of commercial hydrogen peroxides are reported.

Metallophthalocyanines [PcM, Pc: phthalocyanine, M: Fe 2+ , Co 2+ ] were reacted with α-isocyanonaphthalene( α-in) and α-isocyanoanthracene (α-ia) to form monomeric complexes. The synthesis and coordination behaviour of the isocyanides as a ligand (L) are discussed. All the products were characterized by spectroscopic methods and instrumental analysis. The electrical conductivities of these complexes, which were not treated with dopant, were attributed to the metal-ligand electron delocalization in the PcML2 complexes. The complexes have an enlarged macrocycle where the π-electron back donating ability of PcM is stronger than the σ-electron coordinating ability of the isonitrile ligands. Their electrical conductivities were measured as σRT = 2.1×10 -9 ~3×10 -10 S/cm. Also thermal stability was investigated in this study.

The laser-induced transient grating method is applied to study the dynamics of the nematic MBBA film. The nanosecond laser pulses of 355 nm are used to make the transient grating and the cw He-Ne laser of 633 nm is used to probe the dynamics. Strong multiple order diffractions are observed at high nematic temperatures. The reordering process induced by the phototransformed state, which is the locally melted state from the nematic sample, is attributed to the main origin of the multiple order diffractions from the nematic MBBA. The characteristics of the multiple order gratings are discussed with the grating profiles simulated from the multiple diffraction signals.

The rate constants for the nucleophilic addition of potassium cyanide to α,N-diphenylnitrone and its derivatives (p-OCH3, p-CH3, p-Cl, and p-NO2) were determined by ultraviolet spectrophotometer at 25℃, and the rate equations which can be applied over a wide pH range were obtained. On the basis of pH-rate profile, adduct analysis, general base catalysis and substituent effect, a plausible mechanism of this addition reaction was proposed: At high pH, the cyanide ion to carbon-nitrogen double bond was rate controlling, however, in acidic media, the reaction proceeded by the addition of hydrogen cyanide molecule to carbon-nitrogen double bond after protonation at oxygen of a,N-diphenylnitrone. In the range of neutral pH, these two reactions occured competitively.

The incorporation of cobalt into mesoporous molecular sieves MCM-41 and MCM-48 was carried out. Co-PO/MCM41 and Co-PO/MCM48 were prepared using Co(II) acetate solution adjusted to pH = 3.0 with phosphoric acid by the incipient wetness method. Photoacoustic spectroscopy (PAS) was used to study the local environments of Co(II) incorporated into mesopores. The band around 500 nm in PAS of as-prepared Co-PO/MCM41 and Co-PO/MCM48 with Co(II) acetate solution was changed to triplet bands around 600 nm. This could be assigned to the 4 A2(F)-> 4T1(P) transition of Co(II) surrounded tetrahedrally by oxygen ions after calcination. It may be attributable to that the octahedral cobalt species containing phosphate ligands in coordination sphere reacting with framework's silanol groups to be dispersed atomically onto the surface of mesoporous molecular sieves as a tetrahedral species. This is unlike that the Co in Co-Cl/MCM41 and direct-synthesized Co-MCM41 transforms to Co oxide phase upon calcination. Co-PO/MCM41 and Co-PO/MCM48 were stable while treated with water.

It has been proved by the semi-classical gauge invariant formulation (GIF) that the correct interaction operator for coupling the field-free material states with the radiation field must be the position form regardless of the gauge chosen for expressing the electromagnetic potentials, in accordance with the well-established principle of gauge invariance. The semi-classical GIF is now extended to the quantized radiation field interacting with matter by defining the energy operator for the quantized radiation field in the presence of matter. It will be shown in this paper that the use of the energy operator guarantees the position form of the interaction operator even in the Coulomb gauge, contrary to the conventional approach in which the dark material Hamiltonian is used to get the interaction operator of the momentum form. The multipolar Hamiltonian is examined in the context of the quantum mechanical gauge transformation.