PCL were intercalated into organically modified MMT (PCL-MMT) at $80^{\circ}C$ for 4hrs to prepare the PCL-MMT nanocomposite. PCL-MMT and PCL were mixed mechanically with two-roll mill at $150^{\circ}C$ for 15mins. From the results of XRD and TEM, it were found that PCL-MMT nanocomposite were prepared. And mechanical properties and biodegradation of nanocomposite have been investigated by tensile meter and biodegradability analysis experiment. Because of MMT dispersed homogeneously in PCL matrix, the Young's modulus of the nanocomposite was found to be excellent. But the tensile strength and elongation were decreased as increase of MMT. And MMT dispersed in PCL matrix was almost not affected on the biodegradation of PCL.

This study was performed to analysis the operation process when fabric pattern design was done by the use of CAD system compared with the manual work in order to determine the operation efficiency with the application of fabric design CAD system. The results of the study were as follows: 1. since 160,000 colors were supported by CAD system, color proposed by consumer was able to match exactly according to the its design. However, exact color matching was not possible by manual work. 2. Woven state of back of pattern design could be identified simultaneously with face of it for CAD system, while face and back of the fabrics should be designed separatedly in case of manual work. 3. Since the combination of warp and filling yarn was compatible with the fabric density in one repeat unit in CAD system, exact size of pattern design to be woven was able to expressed. 4. Only simple graphical expression by manual work was seen, while with the CAD system, texture and shade effect as well as graphical expression could be expressed and so fault could be reduced in advance with the simulation of actual feeling of fabrics in the screen. In conclusion, when CAD system will be introduced to the textile industry, operation time of designing pattern can be reduced. Since the operation is easy and simple, a beginner can operate CAD system easily. Thus, production and wage costs can be saved and this can be related directly with the improvement of productivity which is the main purpose of introducing CAD system.

This study was performed to find out performance characteristics and develop LNG engine. this system was designed and manufactured by modification of a diesel using the LNgas. The engine was manufactured to be able to change the compression ratio by changing thickness of the gasket. The results are summarized brake power and torque of the engine increased when compression ratio of the engine increased. The engine output showed more power with gasoline by 5-10% then LNG under compression ratio of 9.5.and maximum brake thermal effeiency was noted when air-fuel ratio was 15.5. The concentrations of NOx, CO and HC in the exhaust gas showed lower values with the engine fueled LNG then gasoline.

Titanium specially has high specific strength, excellent mechanical properties as fatigue strength and fracture ductility, good corrosion resistance, and therefore are broadly applied to the various fields. It is required the developmennt for the skills of wire-cut electrical discharge machining(WEDM), but the WEDMed surface was found to be worst due to the attached components of wire. Therefore precision maching method like lapping is necessary for getting high quilty surface. Roughness of lapped surface, surface hardness to each process depth and improved method of surface shape were stuided experimentally, by changing of grain size of diamond lap material and lapping pressure with constant speed in lapping process.

The purpose of this experimental study is to gain equations for the prediction of surface roughness depending on the three major parameters(the cutting speed, the feed rate and the nose radius). It is the merit of Response Surface Methodology that the test time is reduced to minimum size and accurate analysis can be done. On this study, first, made specimen, Al 5052 BE material which is widely used in school and cut the specimen with coated tungsten carbide tools, by varying the cutting conditions, such as the cutting speed, the feed rate and the nose radius. In conclusion, the surface roughness was most greatly influenced by the feed rate. And Surface Roughness equation gained by experiment is as followed $$R=58.2\;v^{-0.22}f^{1.7}r^{-0.66}$$.

Adsorption equilibrium data of pure solvent vapors (n-Hexane, Toluene, MEK) as well as their binary mixtures on activated carbon (sorbonorit $B_4$) were experimentally determined in the range of 293.2~323.2 K and beyond saturated vapor pressure corresponding to experimental temperature. Langmuir, Freundlich, LRC, W-VSM, FH-VSM were estimated for the predication of single component as well as binary mixtuer systems. The isosteric heat of adsorption at infinite dilution of pure n-hexane, toluene, MEK on activated carbon were 45.18, 25.85, 34.62 Kcal/mol, respectively, also, n-hexane-toluene binary adsorption of activated carbon formed an azeotrope at 293.2 K and total pressure 5.1~10.3 mmHg.

Infrared heating has been traditionally used in industrial applications for processes such as dehydration of food industrial. This heating method involves the application of radiation in the wavelength range of 2 to 50 micrometers. In this work, simultaneous heat balance equations were developed to simulate the infrared radiation heating of agricultural products. The equations assume that moisture diffuses to the outer boundaries of the material in liquid form and evaporation occurs at the surface of the agricultural products. Energy for moisture evaporation is supplied by the infrared radiant energy. The optimum temperature and drying time for the best drying conditions of changing the red peppers with the moisture content of 18% and the restore rate of 80~85% are $80^{\circ}C$ and 44 hours. The performance of radiation tubes coating with the radiation paint developed in this research has the energy of $2.27{\times}103W/m^2{\mu}m$, $150^{\circ}C$ within the scope of radiation wave length of $2{\sim}30{\mu}m$ and has the radiation 0.92~0.93, which is superior to the general radiation tubes. The extinction coefficient according to the band pass filter using the 4 flux theory ha higher dependability on wave length, accounting for $2{\sim}17{\mu}m$ and $5{\times}105{\sim}106m-1$. A comparison between the theoretical energy transfer whose figures are interpreted according to 4 flux theory and the experimental energy transfer of far infrared dryer leads to the findings of the agreement less than 5%.