This study is a marketing tool for securing loyal customers and increasing sales by developing a customizing manual according to the change of segmented nail art consumption pattern due to the development of the nail industry and performing art to meet the needs of various customers and increase satisfaction. This was done to demonstrate the possibility of use. In order to develop a manual for the study, we conducted a survey that combined an online survey and in-person survey for ordinary citizens in their 20s and 50s living in Busan and Gyeongnam. Taste (50.0%) was the highest, and personal preference (62.9%) was also the highest for items related to nail art color selection, suggesting that the consumption pattern is changing to require a variety of personal art preferences rather than recommendations or recommendations from practitioners. Could know. As a result of performing nail art by applying the customizing manual developed based on customer selection, opinions were shown in the order of reliability (39.1%), attachment (39.1%), and rarity (26.1%). Utilization (73.9%) was also high in the question of 'If customizing manual was developed as an app', and overall satisfaction with the art selected by the customer was high, indicating that the customer had a high degree of attachment to the nail art design decided by the customer. As for the improvement points of the manual, it was possible to confirm the necessity of developing the app with the majority opinion that handwriting was inconvenient. Based on the nail art customizing manual of this study, the follow-up research proceeds with the app production and utilization process, and it is hoped that it will be used as a basic data for sales promotion by increasing customer satisfaction according to the rapidly changing consumption patterns of nail customers.

This study provided basic data for the commercialization of healthy functional beverages by examining the physicochemical characteristics, nutrient content, and microbiological safety of onion peel beverage. The total acid of onion peel beverage was 0.12 mg/g and the pH was 6.07. According to the storage period, the total acid decreased and the pH increased in all temperature ranges(25℃, 35℃, and 45℃). After 30 days of storage, it showed 0.06 mg/g in all temperature sections and maintained the pH 7 range. The total phenol content, which is a nutritional component of onion peel beverage, was 0.93 mg/g, flavonoid content was 0.25 mg/g, and quercetin content was 0.17 mg/g. The flavonoid content decreased according to the storage period, and in the case of storage temperature of 25℃, it contained 50% content up to 120 days of storage, but in the case of 35℃ and 45℃, it had a flavonoid content up to 90 days and 30 days, respectively. In the case of quercetin, a residual rate of about 50% was shown for 150 days of storage at 25℃ and 35℃. In the case of 45℃, it decreased to 35% at 30 days of storage. On the other hand, onion peel beverage maintained a viable cell count of less than 5 CFU/mL for 150 days of storage, and no coliform group was detected. As a result of analyzing the quality characteristics of onion peel beverage according to storage period, quality stability was confirmed in physicochemical characteristics and microbiological safety. Research on changes in biological activity according to low-temperature distribution or storage period is necessary.

When garlic is aged for a certain period of time while maintaining proper humidity, it causes a browning reaction by its own ingredients and enzymes. In this study, the physicochemical properties were analyzed by varying the temperature conditions for aging garlic. It was found that about 20% of the weight of garlic was reduced through the aging process. During the aging process, both samples showed the highest water content on the 10th day of aging, and the water content of the two samples was similar after the aging was completed. In the analysis of total sugar content change, AG1 (22.0±0.7 vs 21.4±0.6) showed a significantly higher sugar content on the 10th day of aging, but showed a tendency to gradually decrease thereafter, whereas AG2 showed a steady increase in sugar content during the aging process (18.7 < 21.4 < 21.7 < 22.3 < 23.7). The pH change that occurred during the aging process showed the most pH change on the 10th day. In AG1, the pH gradually decreased as the aging period increased, whereas in AG2, the pH increased significantly after the 10th day. In the analysis of browning, AG1 increased sharply on the 10th day and maintained the state, and AG2 showed a significant increase in browning according to the aging process. In conclusion, based on the results of this study, if various ripening temperature conditions are set, it is judged that it will play a positive role in improving the productivity of black garlic.

A systematic support system that develops technology support policies for SMEs (Small and Medium sized Enterprises) and solves technical problems faced by SMEs will increase the productivity and competitiveness of SMEs. To this end, it is necessary to identify the types and level of technology required for SMEs, and to find ways to utilize the technologies possessed by government-funded research institutes leading technology development. It is important to develop a new production technology and to establish a cooperation system between SMEs and government- funded research institutes to solve various pending problems.

It is well known that the Kano model measures customer satisfaction and classifies quality attributes into must-be, attractive as well as one-dimensional. The main purpose of this study is to investigate the dynamics of e-learning quality attributes by applying the proposed method using Kano's satisfaction index in the rapidly changing online learning environment. For this, the current study examined 27 e-learning quality attributes and conducted a comparative study using Kano's results obtained in 2013 and 2020. The result shows that the dynamics of quality attributes suggested by Kano(2001) is confirmed in the case of e-learning. The proposed approach shows better results in terms of Kano's direct classification method, and has potential application areas such as IPA(Importance-Performance Analysis) in the area of risk assemement. Some suggestions for better understanding of the proposed SI-DI diagram are also included in this study.

This paper proposes a method for selecting the capacitance of DC-link capacitors of inverters. In general, the DC-link capacitance of the inverter system must be considered for DC-link voltage, ripple current, switching frequency, ripple voltage, and pulse-width modulation techniques. Therefore, the appropriate capacitance can be determined by finding the rms and peak values of the ripple current of the capacitor. In this paper, the process of extracting the ripple current of DC-link capacitor is described in detail. In addition, the simple method for finding DC-link capacitor capacitance using the result value is presented through the simulations.

This study conducted the measurements of air flow rate for blower systems with experiment and numerical. A new airflow rate test method is suggested, with which it is possible to accurate measurements and calculate the air flow rate for blower systems. The blower(axial fan) is an industrial fluid machine device that supplies a large amount of air by driving an impeller with an electric motor, and it is widely used throughout the industry such as steel, power plant, chemical, semiconductor, LC D, food, and cement. The airflow from the blower is for exchanging the heat in the cooling unit or heat exchanger. The temperature of coolants and hydraulic oil primarily depends on the amount of airflow rate through the cooling package so its accurate estimation is very important. Moreover, it required a larger investment in time and cost since it could not be executed until the system is actually made. Therefore, this research is intended to examine the phenomenon of air flow pattern when testing air flow rate, suggested new test method, and show the result of the validation test.

Fire damage time in high-rise buildings and wildland fire increasing every year. The use of high-pressure fire pumps is required to effectively extinguish fires. Reflecting the curvature effect of the fire hose occurring at the actual fire fighting site, this study provides a database of pressure drop, discharge velocity and maximum discharge height through C FD numerical analysis and it can provide using standards for fire extinguishing. Two Reynolds numbers of 200000 and 400000 were numerically analyzed at 0° -180° bending with water of 25℃ as a working fluid in hoses with a diameter of 65mm, a length of 15m, and a radius of curvature of 130mm. Realizable k-ε turbulence model was used and standard wall function was used. The pressure drop increases as the bending angle increases, and the maximum value at 90° and then decreases. The increasing rate is greater than the decrease. The velocity of the secondary flow also decreases after having the maximum value at 90°. The decreasing rate is greater than the increase. The turbulent kinetic energy increases to 120° and decreases with the maximum value. Pressure drop, velocity of the secondary flow, and turbulence kinetic energy are measured larger in the second bending region than in the first bending region.

With the advent of cutting-edge technology, renewable energy is significantly considered as alternative resources to supply electric power. However, many barriers such as energy intermittency, high initial installation cost, and low-efficiency generation challenged building new infrastructure with clean energy. Efforts reducing greenhouse gas emissions and reliance on fossil fuels resulted in the decentralization of power generation like distributed energy resource (DER). This paper is to introduce and evaluate the feasibility of building-integrated photovoltaics (BIPV) in a high-rise building in Ulsan. To optimize BIPV, a variety of methods to minimize efficiency decrease and maximize electric power generation after installing BIPV on the building's facade are suggested. The variables causing power losses are analyzed. By utilizing System Advisor Model (SAM), actual power generated from solar panels is measured by Thin-film PV, Mono-crystalline PV, and Poly-crystalline PV.

In general, since the types and types of ships, so complex and various variables are included to measure the amount of construction work. In addition, it is mot easy to predict the schedule or the number of working hours before ship construction, and it is also mostly inaccurate. As a result, the master plan is manually drawn up by the expert's experience, but there are limitations due to various factors. Medium and large shipyards are operating APS(Advanced Planning and Scheduling) system that reflects industrial characteristics to improve productivity in the planning stage, and utilize information from systems such as ERP(Enterprise Resource Planning) system and MES (Manufacturing Execution System). On the other hand, small shipyards rely mostly on manual work such as Excel work based on the experience of the workers. Therefore, this study intends to develop a master plan management system that can efficiently manage the production process from the business planning stage in consideration of the characteristics of small shipyards.

We propoes a study on the dynamic characteristics analysis and position control of 5-degree multi-joint manipulators for untact remote working at construction sites and manufacturing plants. The main frame of freedom multi-joint manipulator consists of five elements, boom cylinder, boom cylinder, arm cylinder, bucket cylinder, and rotation joint and link. In addition, the main purpose of the proposed system is to realize the work of the manufacturing process or construction site by remote control. Motion control of the entire system is a servo valve control method by hydraulic servo cylinders for one to four joints, and a servo motor control method is applied for five joints. The reliability of the proposed method was verified through performance experiments by computer simulation.

For this purpose, the authors proposed and proved usefulness of the modified mean skin temperature which is integrated mean radiation temperature and the effect of floor contacted heat conduction. The mean radiation temperature is applied form factor between half cross-legged human body and surrounding wall of indoor. In addition the floor contacted heat conduction is applied heat transfer coefficient of half cross-legged human body. Eight Korean young men were targeted for the experiment. From the experiment the authors excerpted physiological reaction and psychological reaction in Ondol environment which is combined physiccal environmental factor of artificial climate chamber, air and floor temperature. As a result of the experiment it is confirmed that heat conduction has more impact than heat exchange from existing research for the heat exchange between half cross-legged human body and surrounding wall in Ondol thermal environment. Thereby, it is proved the effectiveness of the modified mean skin temperature which is added floor contacted temperature to the Ondol thermal environmental evaluation index.

This paper is about power transfer between heterogeneous systems in zero-energy buildings. Currently, electricity used in buildings, from renewable energy generation power in buildings, consists of alternating current networks. In order to use electricity, alternating current must be converted to direct current, which typically results in a loss of 10%. In order to solve this problem, research is needed to reduce power loss as much as possible by implementing both a DC network and an AC network in a zero-energy building. Therefore, in this paper, an inter-link converter capable of bidirectional power transfer between DC and AC networks applied to zero-energy buildings is developed. The structure of the inter-link converter to be developed was proposed and its feasibility was verified through simulations and experiments.

With the recent increase in international trade volume the trade volume through ships is also continuously increasing. The treatment of ballast water goes through the following five steps, samples are taken and analyzed at each step, and samples are obtained using a suction pump. These suction pumps have low efficiency and thus need to be improved. In this study, it is to optimize the form of the impeller which affects directly improvements of performance to determine the capacity of suction pump and to fulfill the purpose of this research. To do it, we have carried out parametric design as an input variable, geometric form for the impeller. By conducting the flow analysis for the optimum form, it has confirmed the value of improved results and achieved the purpose to study in this paper. It has selected the necessary parameter for optimizing the form of the pump impeller and analyzed the property using experiment design. And it can reduce the factor of parameter for local optimization from findings to analyze the property of form parameter. To perform MOGA(Multi-Objective Genetic Algorithm) it has generated response surface using parameters for local optimization and conducts the optimization using multi-objective genetic algorithm. with created experiment cases, it has performed the computational fluid dynamics with model applying the optimized impeller form and checked that the capacity of the pump was improved. It could verify the validity concerning the improvement of pump efficiency, via optimization of pump impeller form which is suggested in this study.

The exchange of goods over the sea is a situation in which the amount of trade between countries is gradually increasing. In order to maintain the optimal operating condition, the ship maintains stability and optimal operating conditions by inserting or withdrawing ballast water from the ballast tank according to the loading condition of cargo capacity is also increasing. Control valves play an important role in controlling fluid flow in these pipes. When the flow rate is controlled using a control valve, problems such as cavitation, flashing, and suffocating flow may occur due to high differential pressure, and in particular, damage to valves and pipes due to cavitation is a major problem. Therefore, in this study, the cavitation phenomenon is reduced by installing orifices at the front and rear ends of the high differential pressure control butterfly valve to reduce the sudden pressure drop at the limiting part of the butterfly valve step by step. The flow coefficient according to the shape of the orifice, the degree of cavitation occurrence, and the correlation were analyzed using a CFD(Cumputational Fluid Dynamics), and an optimal orifice design for reducing cavitation is derived.