제지 기계의 습부 공정을 안정화시키고, 또한 종이의 지필도에 악영향을 끼치지 않으면서 종이의 기계방향 물성의 변이를 줄이기 위해서, 보류도와 지필도 공정을 동시에 제어하기 위한 제어전략들이 개발되었다. 보류도와 지필도에 미치는 주 변수들에 관한 연구를 양이온성팜(CPAM)/벤토나이트 보류제와 파일럿 제지 기계를 사용하여 수행하였다. 마이크로파티클 보류제 첨가량이 보류도와 지필도에 미치는 영향을 설명하기 위해서 deposition efficiency 모델과 bridging strength 모델을 개발하였다. 제지 기계 보류 공정의 동특성 모델을 질량수지분석을 사용해서 개발하였다. 지료화학 변수의 효과를 모델에 포함하기 위해서, 보류도를 작업조건들에 의존하는 변수로 모델에 포함시켰다. 또한 지필도의 실험적 모델을 개발하고 보류공정을 위한 동특성 모델들과 연계해서 지필도의 동특성을 모사하였다. 여러 제어 전략들이 시뮬레이션상에서 실험되어졌다. 평량과 종이의 회분율 대신에 종이내의 펄프 질량과 충전제 질량을 제어하면 decouper를 사용하지 않고도 두 제어 루프간 상호작용을 줄일 수 있음을 보였다. 지필도의 제어를 위해서, 헤드박스 펄프 농도제어와 폴리머유량과 벤토나이트 유량의 비율제어를 제안하였다. 지종 변경시 백수농도의 설정값을 계산하는 문제를 해결하였다. 또한, 평량, 회분율, 백수농도 및 헤드박스 펄프 농도의 다변수제어가 논의되었다.

It is well known that smoother surface in substrate for coating or converting can obtain better results. Generally paper substrate is taking machine calendar process in papermaking system to give more uniformity and to get better coating runnability. This paper was prepared to find better idea for obtaining smoother surface after precalendering precoated paper as a substrate of double coating system. It was shown precalendering had effect on roughness improvement for precoating layer but was difficult to say it was effected to supercalendering results for double coating. The porosity and ink evaluation with precalendered double coated paper is needed to identify more essential clue for precalendering effect.

In order to improve the printability for offset print in Korea, the experimental printing was performed with commercial press. The clue of this study is that the printing condition of the imported machines are not set properly for the Korean printing materials. Although almost all of the printing machines are imported, printing materials have to be supplied in Korea. So we need to study on the printability between Korean materials and imported machines. In spite of difficulties in experiments with commercial press, three newsprint machines and three commercial printing presses were used for this study over 5 years. As the results, the optimum range and printability coefficients were obtained.

Printing mottle of coated paper is one of the most common and the most difficult problems in offset printing. For a high quality printing, development of new paper coating technologies to prevent print mottle is required. This research focused on improvement of printing mottle. Effects of base paper properties, coating color composition and printing conditions such as printing pressure and printing speed on printing mottle were investigated with RI tester and IGT tester.

Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method. Enzymes in biomass were use to Chemical Deinking for reduce environment pollution through surfactant and improve surfactants. examining into compatibility Enzymes and surfactants, these new materials are studied efficiency of deinking efficiency.

본 논문은 내구성(durability) 및 내오염성(soiling resistance)이 중요한 용지에 있어 재현성 및 반복성이 우수하고 합리적인 측정방법을 구축하는데 목적이 있다. 연구목적에 적합한 시료의 준비, 오염물의 조성, 실험장치 및 실험후의 타당한 평가방법 등에 대하여 선행 연구결과를 고찰하였고 기존 방법의 수정과 새로운 장치의 제작 및 평가방법을 통해 재현성이 높은 평가방법을 정립할 수 있었다.