Vibration characteristics of a 6kW stand alone W/T(wind turbine) system are experimentally and theoretically investigated. Vibration resonance of the tower-cable system is monitored and the data are analysed and compared with the analytical results. To predict the resonance speed of the cable supported W/T, Rayleigh-Ritz method is applied to the tower-guy cable coupled system. Parametric study on the relation of the cable tension, cable elasticity and resonance frequency is carried out. Results of the study are utilized to design the stable structure of small size wind turbines which consist of a pivoted tower and guy cables.

The main purpose of this work is to analyse damages caused by debris flows during the heavy rainfall at Inje province in Kangwondo, Korea. A series of site investigations have been performed to survey the characteristics of debris flows occurred during the summer season of 2006. It has been found that major losses and costs are triggered by discharge of soil and rock fragments from landslides. During the rainfall unexpectedly high precipitation rate of 113.5mm/hour and 355mm/day was recorded, which could happen at a 80-500 year period. Comparing the period of the rainfall with the time of the landslides, it has been found that the occurrence of the landslides is directly related to heavy rainfalls. At present, several debris barriers have been built at the valleys and natural slopes have been protected by the seed spray method. It is intended to propose an appropriate solutions of restoration of landslide damages and maintenance based on findings from the current study.

The proper orthogonal decomposition (POD) analysis of vibration of a steel frame structure is performed to extract modal parameters. The theoretical background of the POD method is introduced briefly, and this technique is further applied to free vibration displacements of one bay-two story steel frame structure to extract the modal parameters. From the POD analysis of the steel frame structure, it is found that important modal parameters such as true mode shapes, modal kinematic energy, natural frequencies, and damping ratios can be obtained for the building efficiently and in detail. Therefore, it is concluded that the POD method could be one of the useful techniques in analysis of vibration of structures.

Reliability plays a pivotal role in products safety and quality. DoD RIAC recently developed a new reliability prediction methodology, $217Plus^{TM}$, for electronic systems. It officially replaces the well-known MIL-HDBK-217 and is expected to be widely used. Although theoretic study about $217Plus^{TM}$ and its application towards field systems seem to be attractive, it is also desirable to understand the general background of its development. In this paper, we performed a historical review of the arenas related to reliability prediction. Due to the vast of materials, our scope was limited to the development of $217Plus^{TM}$. We first reviewed Rome Laboratory and RIAC. We then explained the development course of reliability methods, MIL-HDBK-217, PRISM, and 217-Plus. This review will form not only a good understanding of the methodology but a basis for future study. We conclude this study with provision of future research areas.

As the level of technology and the standard of living improve, product reliability plays an increasingly significant role. This study has been performed to build a reliability model of electronic ballasts for the low wattage fluorescent lamp. Telcordia SR-332, one of the most widely used reliability specifications, was selected for the model development. We briefly reviewed the basic concepts of the electronic ballast. We then developed a reliability model for the ballast using SR-332 concepts and the reliability has been examined. We further discussed the significance of the first-year failure effect on the mean life.

In this paper, we proposed hand detection and hand gesture recognition from USB camera video. Firstly, we extract hand region extraction using skin color information from a difference images. Background image is initially stored and extracted from the input images in order to reduce problems from complex backgrounds. After that, 16-directional chain code sequence is computed from the tracking of hand motion. These chain code sequences are compared with pre-trained models using DP matching. Our hand gesture recognition system can be used to control PowerPoint slides or applied to multimedia education systems. We got 92% hand region extraction accuracy and 82.5% gesture recognition accuracy, respectively.

Stabilization treatment is one of processes for wastes and their components to reduce their toxicity and migration rates to surroundings. Inorganic binders such as calcium hydroxide, blast furnace slag and red mud were tested for their potential applicability to in-situ stabilization of heavy metal contaminated tailings in the abandoned metal mines. Columns(150mm dia. ${\times}$ 450mm length) filled with mixtures of inorganic binders and tailing from the Geumjang mine with various mixing ratios of binders to tailings, 5%, 7% and 9% were applied artificial rainfall tests for 28 days. Effluents from columns filled with calcium hydroxide and tailing showed high pH's of ~12.5 and a increasing trend of concentration in Pb and Zn with a significant decrease in permeability in terms of elapsed days. Those with burning slag and tailing showed pH's of ~8.5 and significantly low concentrations in heavy metals with a stable permeability. In case of red mud, effluents showed significantly low concentrations in heavy metals but a decreased permeability with pH's of ~10.5. Conclusively, this basic study suggests burning furnace slag be a potential stabilizer for effective treatment of heavy metal contaminated mine tailings.

A colony counting on a petri-dish is a laborious task in microbiology fields that automated counting systems are needed. But lots of such systems are high price that majorities of labs rely on the manual counting and it is a time consuming and laborious job. In this study, an attempt was made to select the relative atmospheric correction method for the water quality factors extraction from the satellite image data. And also, the time-series analysis of the water quality factors was performed by using the multi-temporal image data. The result shows that the proposed method can be commercialized with low prices.

In this study, the investigation of hydraulic characteristics and the pier data for the rivers in Youngseo area of Gangwon Province was carried out and the evaluation and comparison between the values from existing formulas and the values from the model tests was conducted, along with the statistical sensitivity analysis of the elements influencing the scour. As a result, the deviation between the values calculated from the existing formulas and the model tests appeared to be 1.09%~63.98% as the piers were getting larger, which indicated that the existing formulas were not appropriate to estimate the scour in the rivers in Gangwon area. And the formula which estimates the scour with the size of the pier only, among the existing ones, was far behind in estimating the sensitivity because of insufficient incorporation of the hydraulic characteristics, though it is convenient to estimate the value. The sensitivity analysis of the value from the model tests and the depth of the scour proved the significant impact on scour by the size of the pier and water depth, indicating 64% and 36%, respectively. In this study, the formula developed through the regression analysis performed based on the values from the model tests, which appeared to be appropriate for the rivers in Gangwon Province, was proposed.

In this paper, we implement a virtual keyboard using infrared distance sensor. A virtual keyboard allows a user to enter characters by selecting keyboard layouts with sensing areas. By projecting infrared light on any flat surface and detection devices we can sense the user's input characters. Unlike a conventional physical keyboard, the virtual keyboard provides convenience in terms of mobility, portability, and space savings.

The removal efficiency of organic compounds and the toxicity evaluation of microorganism have been studied in dye wastewater treatment using $UV/TiO_2$ and $UV/H_2O_2$ photooxidation system. Sample waters tested in this work were raw dye wastewater and dye wastewater treated in $UV/TiO_2$ and $UV/H_2O_2$ photooxidation system respectively. Total organic carbon(TOC) removal rate was 50% in $UV/TiO_2$ process and 80% in $UV/H_2O_2$ process. It has been investigated with colony counting agar method and paper disk method whether the type of treatment process has affected the microorganism growth. In the raw wastewater, more than four types of microorganisms have survived. But, little of microorganisms were alive at TOC removal rate of 50% in $UV/TiO_2$ system. In contrast to that, two types of microorganisms were found at TOC removal rate of 80% in $UV/H_2O_2$ system.

The efficiency of heterogeneous catalysts has been investigated in ozonation process for organic removal. Heterogeneous catalytic ozonation was conducted for the degradation of humic acid in the presence of Granular Activated Carbon or Zeolite as a solid catalyst. And the results were compared to those of ozonation alone and adsorption alone without ozonation. The degradation characteristics of humic acid in each process were examined with the values of pH, TOC, $UV_{254}$ and $COD_{Cr}$.

In this paper, we implemented a speaker-independent speech recognizer using the TMS320F28335 DSP which is optimized for control applications. For this implementation, we used a small-sized commercial DSP module and developed a peripheral board including a codec, signal conditioning circuits and I/O interfaces. The speech signal digitized by the TLV320AIC23 codec is analyzed based on MFCC feature extraction methed and recognized using the continuous-density HMM. Thanks to the internal SRAM and flash memory on the TMS320F28335 DSP, we did not need any external memory devices. The internal flash memory contains ADPCM data for voice response as well as HMM data. Since the TMS320F28335 DSP is optimized for control applications, the recognizer may play a good role in the voice-activated control areas in aspect that it can integrate speech recognition capability and inherent control functions into the single DSP.

Due to frequent occurrence of a localized torrential downpour caused by global warming and change of outflow tendency caused by rapid urbanization and industrialization, risk analysis must be carried out in levee design with uncertainty. In this study, reliability analysis was introduced to quantitatively evaluate the overtopping risk of levee by the uncertainty. First of all, breaking function was established as a function of flood stage and height of levee. All variables of breaking function were considered as random variables following any distribution functions, and the risk was defined as the possibility that the flood stage is formed higher than height of levee. The risk evaluation model was developed with AFDA (Approximate Full Distribution Approach). The flood stage computed by 2-D numerical model FESWMS-2DH was used as input data for the model of levee risk evaluation. Risk for levee submergence were quantitatively presented for levee of Wol-Song-Cheon.

In this study, flood stage was computed by HEC-RAS, 1-D numerical analysis model and FESWMS-2DH, 2-D numerical model. Flood stages computed by two different models were compared for straight line, dot axle watercourse, dead-zone watercourse, section sudden-changing watercourse, and curved watercourse. From the results, flow velocity and water level were similar in straight watercourse and dot-reduction watercourse. However, there was difference of flow velocity and water level in dead-zone watercourse, sudden expansion, dot-reduction, and curve-watercourse. This result might be influenced by rapid change of watercourse due to dead-zone, the angle of inflow and outflow, and the curvature. Especially in this study, numerical model was applied to Wol-Song-Cheon at Chuncheon in order to analyze the effect of flood stage by two different models. By flowing properties around the bridge and confluence of rivers, it was found that flow velocity and water level was changed. Therefore, it was concluded that a lot of uncertainties are contained in the present bank.

Cluster-based servers are utilized for large scale streaming services. These servers show good performance under fair resource usage balance policies between backend nodes. In this paper, cluster-based VOD servers are implemented based on WMI functions. Based on these functions, the information of resource usages in backend nodes can be exchanged and also the working states of cluster nodes can be monitored periodically. In experiences, we find motivations to design an effective load balancing policy. In addition, to provide reliable streaming services, the method to detect a partial failure in cluster-based servers is proposed.

In this paper, an numerical approach is performed to investigate the effects of smear zone, occurred by penetrating vertical drains, on consolidation behavior of soft clay deposits. Such a numerical analysis is applied to the field condition to confirm its applicability. Parametric numerical analyses is carried out to study influencing factors such as permeability in smear zone, boundary of smear zone and discharge capacity of vertical drains on the consolidation of soil. As results of analyses, for the given conditions of soil, degree of consolidation is getting faster with increase of permeability of vertical drain. Degree of consolidation is delayed with decrease of permeability of smear zone. As the ratio of drain width to smear zone increases, the degree of consolidation decreases. Proposed values of influencing factors by previous researchers is found to be reliable from results of numerical analyses with Cam-clay model.

Most of debris flow occurred in Korea have been known to be caused by the heavy rainfall at the soil deposits on the mother rock, affected by conditions of rainfall, topography and geology, especially terrain deposits. A study on debris flow behavior should be carried out by investigating various types of debris flow systematically and analyzing their complicate characteristics in the engineering view points. Tremendous debris flows occurred at Duksan-ri in Inje-gun of Gangwon province during summer in 2006. These sites are selected to study the characteristics of debris flow by investigating the influencing factors on it and analyzing their correlations between them. Most of data about influencing factors were obtained by visiting sites in field.

In this study, to determine characteristics of compaction and the soil water characteristic curve(SWCC) in decomposed granitic soils, compaction tests and SWCC tests were carried out for samples having various contents of coefficient of uniform($c_u$), By compacting their samples with standard Proctor density test, the effects of binder contents on maximum dry density and optimum moisture content were investigated and compared. Samples compacted with the maximum dry density and the optimum moisture content were tested by means of the SWCC, to determine their SWCC parameters, such as Brooks & Corey(${\lambda}$, ${\Psi}_b$), Van Genuchten (${\alpha}$, n, m), Fredlund & Xing(a, n, m).

Recently, a Elevator system is specially important in human life. Also a elevator door is important to a elevator system. In this paper, induction motor drive system using vector control was developed with high performance for elevator door system. For this, velocity pattern generation method was proposed. The proposed system is verified by experimental result with 400[w] induction motor drive system for the elevator door.

The bifunctional Xylanase-Cellulase hybrid protein was constructed by gene fusion. Two genes corresponding to endoxylanase gene (xylS) and endocellulase gene (celA) were amplified by PCR from Bacillus licleniformis NBL420. It was then linked through splicing by overlap extension (SOE) by PCR method. The two resulting fused hybrids, xyl/cel and cel/xyl, which differ by its orientation, were confirmed by its nucleotide sequencings. One of two fusion genes, xyl/cel was successfully expressed into pET22b(+) vector (pxyl/cel) with bifunctional xylanase-cellulase activity. On the contrary, the other cel/xyl fusion protein showed only cellulase activity with much decreased xylanase activity. Enzymatic properties of Xyl/Cel fusion protein were investigated regarding optimum pH, optimum temp, thermostability, and pH stability. It was revealed that Xyl/Cel fusion protein retained the bifunctional xylanase-cellulase activities eventhough two enzymes were connected with each other directly. These informations could be useful for construction of other hybrid proteins as well as increased range of substrate utilization.

The gene encoding endoxylanase (xylS) was isolated from a genomic library of Bacillus licheniformis NBL420. Two positive clones, which harbor 1.5 kb and 0.8 kb inserts respectively, were screened on RBB dyed-xylan plates and the recombinant plasmids were named as pBX3 and pBX5. The nucleotide sequencings of two inserts revealed the existence of common 639 bp of open reading frame which encode 232 amino acids. The xylS gene was successfully subcloned into pET22b(+) vector and overexpressed. Enzymatic properties including optimum pH, optimum temp, thermostability and pH stability were investigated. Activity staining of XylS was identical with that of original Bacillus licheniformis NBL420.

The inductor which is used at low frequency as the main part of magnetic ballast consists of an iron core, a bobbin and coil. The conventional inductor design method is not suitable for the magnetic ballast because it has various variables and is not a unique method for the magnetic ballast. Thus, this paper presents the optimal design method for a lamination type inductor using a magnetic ballast for Metal Halide Lamps. Also, the optimal inductor design method is researched for inductors of dimming ballasts and ignitors that have a gate-triggered structure using a SCR thyristor. By the simulation and experimental results, we showed that the proposed design methods is valid.

This study deals with the single-product production and transportation model with dynamic demand over finite time horizon, in which the optimal production(order) quantities, transportation modes and the number of each vehicles are determined simultaneously. The finite number of identical vehicles with capacity constraint is given to each mode. Production and transportation costs are assumed to be concave function for generality. For a relevant mathematical model formulated, the theorems and properties are discussed to present the efficient algorithm. A numerical example is solved to illustrate the algorithm developed.