To estimate agricultural water demand, many factors such as weather, crops, soil, cultivation method, crop coefficient and cultivation area, etc. must be considered. But it is not easy to estimate water demand in consideration of these factors, which are variable according to growth stage and regional environment. This study provides estimation system for agricultural water demand(ESAD) in order to estimate water demand easily and accurately, and arranges all factors needed for water demand estimation. This study identifies the application of estimation system for agricultural water demand with the data observed in the other studies, and analyzes nationwide agricultural water demand. The results are as follows. 1) The practice of different rice cultivation in the paddy field resulted in different water demands. Water depth and infiltration ratio in paddy are the most important factors to estimate water demand. The water depths in paddy simulated by ESAD is very similar to the observed ones. 2) Water demand of upland crops varies with the crops, soil, etc.. Effective rainfall estimated by daily routing of soil moisture varies according to the crops, soil, and effective soil zone(root depth). As crop root become grown, effective rainfall and an amount of irrigation water has been increased. 3) The current unit water demand of upland crops applied as 500mm or 550mm to estimate water demand does not reflect the differences caused by the crops, regional surrounding, weather condition, etc. Results from ESAD for the estimation of water demand of upland crops show that ESAD can simulate the actual field conditions reasonably because it simulates the actual irrigation practices with the daily routing of soil moisture.

Pollutant loading potential was evaluated for manure application practices on farm fields, through survey and pot experiments. The survey indicated that most farmers applied the manure during the early spring. About 74% farmers apply the manure during the period from December to May. Considering the monthly rainfall amount in this period, the pollutant loading potential is not high. Leachate obtained from pot piled up with manure compost, using a rainfall simulator, showed that average concentrations of COD, SS, TKN, N $O_{3-}$N, TP were up to 2,000mg/L, 240mg/L, 107mg/L, 10mg/L, 50mg/L, respectively. These concentrations could be affected by rainfall intensity and the amount of piled manure compost. Therefore, implementation of management practices are recommended to control or minimize of leachate from manure compost piled on farm field.

North Korea reported that tideland reclamation projects had been successfully constructed and/or under construction during the period of the third development scheme(1987∼1993), which were 28,400ha in 9 project areas: 8 projects along the western coast and one in the eastern coast. In this study eight projects located in western coast were investigated in order to confirm the detail of works, construction stages and difference from our project formulation methods using the topographic maps published in different years and the recent sattelite image data especially Lansat TM and SPOT PN. Intensity-hue-saturation (IHS) method was adopted to merge two sattelite data for the image enhancement of remote sensing. Construction stages of sea-dikes, land consolidation for paddy and salt pan, reservoir for irrigation and desalinization and the present land use were investigated and estimated the acreage of the development areas. The total gross project areas of 38,105 ha: 16,555 ha completed for paddy or salt pan, 16,826 ha under construction, and 4,724 ha under planning were confirmed, although the area of 27,100 ha in 8 projects were reported to be completed or ongoing on the bimonthly journal of N. Korean Trend published in 1994.

This study aimed at developing the standard questionnaire database system for rural development. By the previous study for the hierarchical listing of the factors related to rural development in the village level, the targetting questionnaire items pool was proposed. The data base system basically consisted of 3 parts: general, principal and sectoral parts for rural development. General and principal parts had the detailed questionnaires without any further hierarchy, but sectoral one 4-step hierarchy from high/medium/low levels to detailed questionnaires. Tentatively, total 417 questionnaires statements were written with 5 questioning styles: single choosing, multiple choosing, tabular, writing and special questions. Through the checking done by college students team from rural area, the database system having 467 questioning statements was finally developed.

In designing the greenhouse structures, snow and wind loads must be estimated on the basis of the probability of occurrence of snow or wind storms of a given intensity. The recurrence interval chosen depends on the standard durable years and safety factors of the greenhouse. This study was carried out to find the standard durable years of pipe framed greenhouses. Bend test for metallic materials was conducted on samples of galvanized steel pipes being used in greenhouse frames. A secular change of collapse loads and flexural rigidity for galvanized steel pipes were analyzed with the parts buried in the ground and exposed in the atmosphere. From those experimental results and corrosion rate of galvanized film, the standard durable years for pipe framed greenhouses are estimated as follows ; the small scale pipe houses of movable type is 7∼8 years and the large scale pipe houses of fixed type is 14∼15 years.

This study has been done to investigate the characteristics of the wall materials of a earthen house ; the core-wall of a wood-frame house and the mud-wall of a all-wall house. A series of tests is carried out to study the physical properties of wall materials which are picked from existing earthen houses. The core-wall materials are composed of sandy soil or clayey soil with low plasticity. The mud-wall materials are sandy soil with well compaction effect. It is confirmed that the wall materials are common soils which are easily picked from the residential quarter.

This study attempted to make evaluation model of deterioration for the rural house. defined the deterioration of rural house as the two categories. First is the physical deterioration which is affected by physical faults and the second is the social deterioration which is affected by change of environments. As a results, physical deterioration model was developed by types of rural house, and social deterioration model was considered to reverse function of satisfaction of a resident.

This study is performed to examine the physical and mechanical properties of eco-concrete with polypropylene fiber. Test results show that the strengths are increased with increase of the content of natural gravel, excellent soil compound and polypropylene fiber. The coefficient of permeability is increased with increase of the content of the polypropylene fiber but it is decreased with increase of the content of natural gravel and excellent soil compound. The lowest coefficient of permeability is achieved by eco-concrete which it is 100 times lower than that of the control. The durability factor is increased with increase of the content of natural gravel and excellent soil compound, and decreased with increase of the content of polypropylene fiber.

The theory of non-prismatic folded plate structures was reported by D.H. Kim in 1965 and 1966. Fiber reinforced composite materials are strong in tension. The structural element for such tension force is very thin and weak against bending because of small bending stiffnesses. Naturally, the box type section is considered as the optimum structural configuration because of its high bending stiffnesses. Such structures can be effectively analyzed by the folded plate theory with relative ease. The “hollow” bending membr with uniform cross-section can be treated as prismatic folded plates which is a special case of the non-prismatic folded plates. In this paper, the result of analysis of a folded plates with one box type uniform cross-section is presented. Each plate is made of composite laminates with fiber orientation of [ABBCAAB]r, with A=-B=45${\circ}C$, and C=90${\circ}$. The influence of the span to depth ratio is also studied. When this ratio is 5, the difference between the results of folded plate theory and beam theory is 1.66%.