In this paper, we have proposed a prediction method for sabot-trajectory of projectile using high speed camera data analysis. Through analyzing trajectory of sabot with high speed camera data, we can extract its real velocity and acceleration including effects of friction force, pressure of flume, etc. Using these data, we suggest a prediction method for sabot-trajectory of projectile having variable acceleration, especially for minimum and maximum acceleration, by using interpolation method for velocity and acceleration data of sabot. Also we perform the projectile launching tests to achieve the trajectory of sabot in case of minimum and maximum thrust. Simulation results show that they are similar to real tests data, for example velocity, acceleration and the trajectory of sabot.

The Republic of Korea Marine Corps is planning to develop a new amphibious assault vehicle which is able to operate with higher water speed than current KAAV. In order to achieve a higher water speed for hydrodynamically bulff-body vehicles, it is essential to develop drag reduction strategies. In this paper, resistance characteristics including trim angles of amphibious assault vehicles with several appendage designs are investigated using a commercial CFD code, STAR-CCM+. The computed results are compared with experimental data conducted at the towing tank with 1:4.5 scaled model and show good correlation. Comparing with the results of bare hull, 3.4 % of hydrodynamic drag and 52 % of trim angle are reduced by the application of double angled bow flap and a hydrofoil attached at the transom.

Polar fomat algorithm (PFA) was derived from medical imaging theory, known as back projection, to process synthetic aperture radar(SAR) data. The difference between the operating condition of SAR and back projection assumption makes two distortions. First, the focusing performance of PFA is degraded in proportion to distances from the scene center. Second, the geometric accuracy in SAR images is distorted. Several methods were introduced to mitigate the distortions, but some disadvantages, such as the geometric discontinuity, are arisen when sub-images are combined. This paper proposes the novel method to compensate the geometric distortion with chirp Z-transform (CZT). This method corrects precisely the geometric errors without any problems, because a whole image can be processed all at once.

In this paper, an integrated analysis model for evaluating the underwater acoustic performance of the multilayered acoustic coatings containing visco-elastic composite layers with hollow glass microspheres is described. The model uses the effective medium theory considering the acoustic scattering and resonance effects of the inclusions. Also, the model incorporates the compressive deformation mechanism associated with hydrostatic pressure. The technique developed in this work was used as the acoustic layer design and performance analysis tools for the practical hull coatings and acoustic baffles in Korean next generation submarines.

In order to successfully detect and identify underwater targets located on the seabed, unmanned surface vehicles (USVs) typically acquire acoustic signals with a side-scan sonar device and reconstruct information about the target from the processed images. As the quality of the side-scan sonar images acquired by USVs depends on the environment and operating parameters, using modeling and simulation techniques to design side-scan sonar devices can help optimize the reconstruction of the sonar images. In this work, we study a side-scan sonar design for use in USVs, that takes the movement of the platform into account. First, we constructed a simulated seabed environment with underwater targets, and specified the maneuvering conditions and sonar systems. We then generated the acoustic signals from the simulated environment using the sonar equation. Finally, we successfully imaged the simulated seabed environment using simple signal processing. Our results can be used to derive USV side-scan sonar design parameters, predict the resulting sonar images in various conditions, and as a basis for determining the optimal sonar parameters of the system.

In this paper, we proposed a method for eliminating aiming error of unguided anti-tank rocket using improved target tracking. Since predicted fire is necessary to hit moving targets with unguided rockets, a method was proposed to estimate the position and velocity of target using fire control system. However, such a method has a problem that the hit rate may be lowered due to the aiming error of the shooter. In order to solve this problem, we used an image-based target tracking method to correct error caused by the shooter. We also proposed a robust tracking method based on TLD(Tracking Learning Detection) considering characteristics of the FCS(Fire Control System) devices. To verify the performance of our proposed algorithm, we measured the target velocity using GPS and compared it with our estimation. It is proved that our method is robust to shooter's aiming error.

In this paper, we described about methods and results to verify the Tx/Rx beam characteristics of a planar active phased array antenna as using a near-field measurement. The near-field system can effectively measure multiple beams and predict the performance degradation due to the partial failure of individual elements. Also, it can accurately predict the EIRP relating to detection performance of the active phased array radar. We briefly described the near-field measurement method to verify the Tx/Rx beam characteristics, and then verified the effectiveness of measurement method by analyzing the measured results.

Korean-peacekeeper's transparent armors in Iraq showed delamination, cracking and clouding a decade ago. And there were also similar deterioration recurrences in KLTV during the operational test a few years ago. Also, the differences between operational capability & lab Bullet-proof test condition, and insufficiency of military protection spec resulted in incomplete bullet-proof results. Moreover, although so many ground weapon systems have been developed, there were not secure test & evaluation codes to verify transparent armoured glasses equal to advanced-overseas products. So in this study, first, environmental test codes were established that all tests should be carried out as the application of only one specimen with newly adopted thermal shock test instead of completing each test with different one. Second, protection standards were integrated through the analysis of global developed country's specifications and reinforced as adding to the real mock-up condition if vehicle's glasses are smaller than standard specimen. Hereby, by applying to test-codes which including actual operational & vehicular conditions, the gap between development test and operational environment was minimized.

This study has analyzed the convective heat transfer on the deck exposed to the high-temperature impingement exhausting from a VTOL vehicle. The heat flow of the impingement on the deck is modeled by the convection heat transfer. The convective heat flux generated by the hot impinging jet is investigated by using both convective heat transfer formulation and conjugate heat transfer formulation. Computational fluid dynamics(CFD) code was used to compute the heat flux distribution. The RANS equation and the k-e turbulence model were used to analyze the thermal flow of the impinging jet. The heat flux distribution near the stagnation zone obtained by the conjugate heat transfer analysis shows more reasonable than the convective heat transfer analysis.

Since media articles, which have a great influence on public opinion, are transmitted to the public through various media, it is very difficult to analyze them manually. There are many discussions on methods that can collect, process, and analyze documents in the academia, but this is mostly done in the areas related to politics and stocks, and national-defense articles are poorly researched. In this study, we will explain how to build an automatic analysis system of national defense articles that can collect information on defense articles automatically, and can process information quickly by using topic modeling with LDA, emotional analysis, and extraction-based text summarization.

In this paper, the wideband mono-pulse radar using AGC and limiter is designed. The output response characteristics of the mono-pulse radar using AGC and limiter are analyzed, respectively. In addition, the output response for jamming input signals is analyzed. The range tracking loop in the mono-pulse radar has robust output response to the noise jamming input signal. Although the output settling response of the AGC-based mono-pulse radar is larger than that of the limiter-based mono-pulse radar, the AGC-based mono-pulse radar has robustness to the noise jamming input signal due to feedback loop.

The operational concept of control systems on surface combatants has been changed from individual control for each system to integrated control for all systems due to computing technology development and crew reduction policy of navy. The purpose of this study is to identify current status of control technology, to analyze user requirement and to develop an architecture to support the conceptual change of ship control. An architecture, which integrates several control and monitoring systems on naval surface combatant, is proposed. The proposed architecture is focused on sharing network and computing resources related to user command, and reducing systems complexity. The architecture can be adopted to next surface combatants in Korean navy.

In this paper, we consider the applicability of time-hopping(TH) systems for anti-jamming(AJ) communication. We first briefly summarize fundamentals of TH systems and several common jamming scenarios that have been considered in the literature. We then analyze the AJ performance of TH systems under those common jamming environments. From our simulation results, we reveal that among narrow band, partial band, broadband, and sweep jamming, partial band and sweep jamming are the best ones from jammer perspective. For the partial band jamming case, we show that the most effective bandwidth ratio and location are 50 % and 2.5-3.5 Ghz, respectively. For the sweep jamming case, we illustrate that the AJ performance of the TH system is enhanced when the sweep duration approaches to the bit duration. In addition, we pointed out that the most efficient jamming bandwidth ratio is 1/2. Finally, our results show that the TH-BPSK system greatly outperforms the TH-PPM counterpart.

This paper presents a shelf life assessment for K-1 military gas masks in the Republic of Korea using test data of Chemical Materiels Stockpile Reliability Program(CSRP). For the shelf life assessment, over 2,500 samples between 2006 and 2015 were collected from field tests and analyzed to estimate a probability of proper and improper functionality using Bayesian estimation. For this, three stages were considered; a pre-processing, a processing and an assessment. In the pre-processing, major components which directly influence the shelf life of the mask were statistically analyzed and selected by applying principal component analysis from all test components. In the processing, with the major components chosen in the previous stage, both proper and improper probability of gas masks were computed by applying Bayesian estimation. In the assessment, the probability model of the mask shelf life was analyzed with respect to storage periods between 0 and 29 years resulting in between 66.1 % and 100 % performances in accuracy, sensitivity, positive predictive value, and negative predictive value.