This is a study for the improvement of the defected elevator spar in operating aircraft. The elevator spar web holes were analyzed to find out the cause of the cracks. The fatigue striations were observed and the cracks occurred by the repetitive stresses during the elevator works. Also the outboard connection structure of the elevator and horizontal stabilizer was more weak shape than the inboard. The design changes were recommended and the analyses were performed to verify the improvement of the changed shapes.

In the direction and location finding field of application, AOA, TDOA and FDOA, etc. are used to improve the performance of geolocation. But, these methods cause some limitations such as the calibrations for phase and amplitude matching and precise time synchronization among receiving channels. In this paper, We suggest a method for generating FDOA using rotating antenna and the geolocation of stationary emitter using two receivers in one platform for minimizing the limitations. We present performance of simulation results and test results of the FDOA geolocation system. The direction finding errors of the system are less than $0.1^{\circ}$ rms and the distance errors are less than 3 % compared with the practical distance.

EOIS(electro-optical imaging system) is the main target of the laser weapon. Specially, the image sensor will be vulnerable because EOIS focuses the incident laser beam onto the image sensor. Accordingly, the laser-induced damage of the image sensor needs to be identified for the counter-measure against the laser attack. In this study, the laser-induced damage of the CCD image sensor irradiated by the CW(continuous wave) NIR(near infrared) laser was experimentally investigated and mechanisms of those damage occurrences were analyzed. In the experiment, the near infrared CW fiber laser was used as a laser source. As the fluence, which is the product of the irradiance and the irradiation time, increased, the permanent damages such as discoloration and breakdown appeared sequentially. The discoloration occurred when the color filter was damaged and then the breakdown occurred when the photodiode and substrate were damaged. From the experimental results, LIDTs(laser-induced damage thresholds) of damages were roughly determined.

Thermal imager is now regarded as one of the key observation devices for ISR activities and getting important more and more. As other detectors, however, the thermal detectors also have maximum input and therefore they will be saturated if the input IR energy exceeds the allowed range. The saturation in the thermal detector makes it impossible to distinguish the target from background, as a result, the thermal imager does not perform its own mission anymore. In order to get an insight related with the image saturation, this paper develops a saturation model for a thermal imaging system, not a thermal detector. The proposed modeling starts from analyzing the specification of a thermal imager. Coupled with the characteristic parameters of the object, the saturation model can be used to predict the distance on which the detector is saturated. The proposed saturation model prove its validity by applying it for the case of observing a flash-bang.

The purposes of this study is to identify the problems arising from current Test & Evaluation process of the naval ship acquisition program and to suggest methods to increase the acquisition efficiency. Considering that the present rule of developmental test &evaluation(DT&E) and operational test & evaluation(OT&E) has caused an inefficiency effect on the acquisition procedures due to the limited practices on it, the DT&E and OT&E procedures through test & evaluation master plan(TEMP) is proposed based on the selective practices of the defense instruction articles. Also, considering characteristics of naval ship acquisitions, efficient procedure systems are derived through case analysis results by comparing each performances of the system. The suggested methods are able to meet the requirements of the changed acquisition environments and also increase efficiency of acquisition systems by adoption of DT&E and OT&E combined test scheme.

The purpose of this study was to inspect ballistic match of copper bullet at 4 points by analyzing vertical deviation about shot group of the 5.56 mm common bullets and copper bullets. The 5.56 mm bullet with new copper core material was developed for mitigation of environmental pollution and harmfulness to human body. The results of this study are as follows; using the regression analysis, estimated reference value of ballistic match were 51.6 mm, 64.9 mm, 87.3 mm and 99.6 mm at 25 m, 100 m, 200 m and 250 m range respectively. When analyzing the shooting test data, alternative hypothesis(The vertical deviations are less than the reference value) was adopted as the result of analyzing data using t-test. And the values of data through tool(PRODAS) and standard trajectory equation meet requirements of estimated ballistic match respectively. In conclusion, the level of ballistic match of 5.56 mm copper bullets meets the estimated reference level through regression analysis at 4 points.

CCN(Content-Centric Network) enables users to retrieve content using the content's name. Researchers face critical challenges in terms of mobility. Since the routing information is part of the content name, when the provider moves, it is necessary to update all the routers routing information. However, this requires significant costs. In this paper, we propose PNPCCN(Proactive Neighbor Pushing CCN), considering the popularity and rarity of mobility support, for providers in CCN environments. Via simulation studies, we demonstrate that our solutions are effective in terms of shorter numbers of retransmitted Interest packets, and average download times and higher delivery ratios during mobility.

Network-Centric Warfare is a forthcoming military revolution paradigm for maximizing combat effectiveness in terms of information superiority. However, quantitative assessment of information effect is a challenging issue. Among the many approaches, war-game is a well known method to evaluate combat effectiveness. However, previous researches and current models have a limited function or logic to simulate information process, which is core concept of NCW. So this research suggests a concept of simulation modeling method to describe the information process as defining of combat information process based on probability decision model. In addition, we suggest a simple scenario to represent proposed concept modelling method. This results can be used in designing war-game analysis model for enhanced information effectiveness.

Interoperability tests are required to determine whether network-based defense systems successfully share and exchange certain services, information, and data. We must examine various aspects of interoperability. The DITA (Defense Information Technical stAndard) is the basis for interoperability. However, DITA is being applied to the defense system in a state that the standard test methods and procedures are not established. And there is no test method and procedure of the DITA well applicable to military weapons systems or information systems. Therefore, in this paper, we propose a framework that includes procedures, methodologies, so as to test whether a standard is applied to the DITA in terms of Standard Conformance Test.

Tactical Multiband Multirole radio(TMMR) has been developed and under some official testings now. Our army wants TMMR to be installed in Ground Fighting Vehicles(GFVs) and be incorporated with their Battlefield Management System(BMS). Also, BMS with TMMR should communicate with BMS on FM radio which is currently under use in most of GFVs. To achieve such goals, some significant changes should be made into the present BMS and in this paper, several considerations will be presented in the both sides of hardware and software point of view.

In this paper, a method for generating ranging signal to reduce the effects of interference and overcome intentional jamming is proposed in slow frequency hopping(SFH) communication system. A terminal uses ranging signal for initial Up-link synchronization in the frequency hopping communication systems using multi-terminal. However, ranging signal generated by unsynchronized terminal acts as an interference signal to another terminal. Therefore, we propose the design of the ranging signal with PN sequence in order to minimize the affection to the other terminal and simulated its performance. From the simulated result, we confirm synchronization performance.

Technical approach on the modeling, simulation and experimentation methods, which are applied for developing a constructive simulation and engagement experimentation software for supporting light weight torpedo operational tactics study, is introduced. Conceptual modeling for the weapon engagement and simulation entities, mathematical models for the simulation elements, approach for the design of experimentations are described, and screen shots of the software are also presented as some example results of experimentation and analysis. It is found that the simulation and experimentation results are useful to support and fulfill the mission needs and requests. As a consequence, the technical approach is rated to be appropriate to accomplish the dedicated purpose of the simulation and experiments.

In this paper, a global path replanning method is proposed in order to plan a global path minimizing the risk of the unmanned vehicle on the battlefield. We first introduce 4D environmental information consisting of mobility, visibility, kill, and hit attributes, and a unified threat map and a mobility map are defined by the four attributes. Using the mobility map, the unmanned vehicle can find the shortest path on the traversable area. And then taking into account the deterrent according to the type of the unmanned vehicle on the integrated threat map, the vehicle can generate a route to suppress or avoid the threat of enemy as well. Moreover, we present a waypoints bypassing method to exclude unnecessary waypoints rather than the mission point when planning paths for the multiple waypoints.

In the Core Technology R&D of the defence area, the development of the related core element technology could be the foundation to develop advanced weapon system in the future. But it might make various problems if you can not accurately define the TRL of the element technology. In other words, if the technology is not sufficiently mature and then the project starts, it might require an increase in the development period and additional cost. Finally the system will be in an incomplete state and result in user dissatisfaction and the project failure. Therefore it is a very important task to properly assess the TRL for a successful project. In this study, We propose the method for risk management of core technology R&D project of the defence area using the QFD process with degree of difficulty and technology readiness level. It is also presented the process to determine the risk level using TRL and Degree of difficulty. Finally We apply this method to UGV system for verifying the result of this study.