The purpose of this study was to evaluate accessibility condition of buildings in a college from manual wheel chair users' perspective in order to suggest improvements, and to develop 3D accessibility maps in order to assist manual wheelchair users' prior planning for the building use. In May 2020, on-site investigation was held to three buildings in Chungbuk National University. Major findings were as follows. (1) There were some building entrances that showed level difference over 2cm without proper ramp with slow slope 1/8 or less. (2) Some rooms were found to have accessibility issues to have floors with height more than 2cm, and/or to have no height-adjustable desks. (3) Although accessible restrooms were in good condition for manual wheelchair users' access and use, it is suggested to install accessible restroom for each gender in each floor for better access. Using the study results, 2-dimensional accessibility maps for each floor were developed in color and grayscale, which were further developed into 3-dimensional accessibility maps for each building.

In this study, the vibration characteristics were theoretically analyzed by modeling a free isotropic rotating disk with an outer periphery with a fixed inner periphery, paying attention to disks used as storage devices for information devices, especially magnetic disks, magneto-optical disks, and compact disks in which the head and disk are non-contact. Iluminate with Composite materials represented by fiber-reinforced plastics (FRP) have high specific strength (strength/density) and specific stiffness (narrowness/density). It is used in the elements, and its use is rapidly expanding. Under this circumstance, the disk currently manufactured using an isotropic material made of various plastic materials such as aluminum or polycarbonate as a base material is an extremely anisotropic material made of a composite material, and the circumferential stiffness of the disk is made of reinforcing fibers in the circumferential direction. It is modeled as an anisotropic rotating disk with increased, and its influence on the vibration characteristics is revealed.

The purpose of this study is to examine the factors affecting the housing satisfaction of elderly households in comparison with non-elderly households, and to present policy implications in terms of housing welfare policies. For this purpose, this study used ordered logit model analysis using '2019 Housing survey data'. As a result of the analysis, in the case of individual/housing characteristics, the analysis results of the non-elderly household model and the elderly household model were similar. However, in the case of regional characteristics, non-elderly households living in the metropolitan area showed higher housing satisfaction than non-elderly households living in the non-metropolitan area, whereas the elderly households living in the metropolitan area had lower housing satisfaction than the elderly households living in the non-metropolitan area. In addition, the satisfaction variable of neighborhood/environmental characteristics that had the greatest impact on the housing satisfaction of non-elderly households was found to be crime prevention status satisfaction, and the satisfaction variable of neighborhood/environmental characteristics that had the greatest impact on the housing satisfaction of elderly households was air pollution satisfaction. The results of the analysis can be used as various reference materials when establishing housing welfare policies for elderly households.

The number of old buildings older than 30 years in Korea continues to increase from 29.9% in 2005 to 38.8% in 2020. Considering the growing urban regeneration projects, urban maintenance projects, the suppression of urban expansion, and the lack of idle land in the city, the dismantling of old buildings is expected to increase further in the future. As major accidents at building dismantling sites continue to occur, related agencies are also strengthening safety management of building dismantling works. While physical safety management such as collapse and fall is strengthened, there is a relative lack of interest in the health of workers at dismantling sites due to environmental hazards. Since relevant laws stipulate that construction waste should be separated and discharged, old buildings need to be considered for environmental hazards such as fine dust, floating bacteria, and floating molds when dismantling. In this study, we intend to find important safety management elements in the management of building dismantling sites, measure environmental factors harmful to dismantling workers, and present basic data for the management of dismantling sites in the future. "Safety management" was the highest priority, followed by "dust," "vibration," "noise," "bacteria," and "smell." The perception of the importance of "physical damage prevention" with workers working on dismantling and managers managing the site came out similar, but the perception of "work efficiency" and "health disorder prevention" through environmental hazard management showed different priorities. In the process of dismantling, floating bacteria and floating mold were collected, cultured, and measured the concentration in the indoor air. The measurement was measured by dividing it into pre-dismantling and during dismantling.

In this study, to evaluate the characteristics of the pollution in the major inflow tributaries and major environmental facilities in the watershed of Ara waterway, An inflow flow rate measurement and water quality analysis were conducted during dry and rainy seasons. In addition, the flow rate measurement, water quality analysis, and pollutant load at each monitoring point were compared and evaluated. Influx of BOD5, T-P and T-N into the tributaries of the ARA waterway watershed, excluding the Gulpo river watershed, during dry season were only 0.007%, 0.005% and 0.004% respectively of the incoming loads in the entire ARA waterway basin. In addition, it was confirmed that the discharge pollutant loads during rainfall event was about 440 times more for BOD5, about 545 times on T-P, and about 23 times on T-N in comparison to the pollutant loads during the dry days. When the Gulhyeon rubber dam was deflated, the discharged pollutant load during a rainfall was higher than the estimated load at the G7 monitoring point because the deposited pollutants from the upstream riverbed flowed down. Therefore, during a rainy season, it is necessary to manage the influx of high-load water pollutants from the overflow and deflation of the Gulhyun rubber dam as well as to find a strategy to reduce the pollutant loads in the Gulpo river watershed.

The purpose of this study is to analysis the impact on the inside of the new city when an incidents occurs on the Songdo International City connecting road, which has a limited access. The analysis data used KTDB's O/D and network data of the Seoul metropolitan area. In addition, the scenario composition applied a method of reducing the number of lanes on the road according to the situation of incidents, targeting bridges advancing from Songdo International City to the outside in the morning peak hours. The analysis method analyzed the traffic volume, total travel time, total travel kilometer, and route change in the new city based on the results of the traffic allocation model. As a result of the analysis, the range of influence was shown to two types. First, of the seven bridges, Aam 3, Aam 2, and Aam 1 were analyzed to have an impact only in some areas of the northwestern part of the new city. On the other hand, the remaining bridges were analyzed to affect the new city as a whole. The analysis results of this study are expected to be used as basic data to establish the scope of internal road network management when similar cases occur in the future.