Recently, supporting ATM networks under LINUX operating systems environment has been actively studied. An ATMARP server in a conventional LINUX environment was designed under the ATMARP single-server to operate independently within a Local IP Subnet(LIS). In this paper, an ATMARP multi-server is introduced and implemented an ATMARP-server managing multiple LIS's on the LINUX-based IPOA. The ATMARP protocol processing functions and addition/deletion functions on management tables are required to implement the ATMARP multi-server. These functions can solve the problem of increasing the number of ATMARP servers in ATMARP single-server environment. The file transmission experiment with a connection configuration between LIS's shows that multiple LIS' con be managed by an ATMARP-server. As the results, the ATMARP multi-server scheme yields a smaller number of servers than that of the conventional ATMARP single-server scheme, and the network composition can be improved substantially.

본 논문에서는 안테나 배열을 사용하는 통신시스템을 위한 일반화된 벡터 채널 모델을 제안한다. 제안된 채널 모델에서는 실제적인 채널에서 발생할 수 있는 경로 감쇄, 전파 음영(shadowing)의 시간-공간적인 변화, 다중경로 페이딩, 도플러현상, 국지적인 산란체(scatterer)들의 공간적인 분포와 지배적인 원격 산란체들에 의한 지연 확산을 고려한다. 실제적인 채널 환경을 반영하기 위하여 이산 경로 모델을 사용하며, 각각의 이산 경로 신호는 독립적인 전파 음영과 페이딩, 도플러 영향을 받으며, 서로 다른 입사각을 가지고 안테나 배열에 수신된다. 제안된 모델을 바탕으로 수신되는 신호들에 대한 시간-공간적인 상관값에 대한 관계식을 유도하고, 공간 채널 시뮬레이터를 구성한다. 이론적인 상관값과 시뮬레이터를 통하여 얻은 결과를 비교함으로써 시뮬레이터의 유효성을 검증하고, 구성된 시뮬레이터를 사용하여 다양한 채널 환경하에서의 채널 특성의 변화를 분석한다.

Future microcellular systems will require distributed network control. A packet-switched network is suitable for this requirement. The packet reservation multiple access(PRMA) is a Reservation-ALOHA like protocol for wireless terminals to transmit packet speech to a base station. It allows spatially distributed users in cellular systems to transmit packeted voice and data to a common base station using a shared channel. In the existing PRMA, the problem is that the voice packets may collide with the data packets due to simultaneous channel access. the problem may be a major performance degradation factor to a voice and data mixed system. We propose a new PRMA method that integrates voice and data traffic efficiently by resolving the collision problem between data and voice packets. The proposed PRMA method gives a performance improvement than the existing PRAMA method in terms of voice packet dropping probability and data delay characteristic. From analytic results, we can confirm that the proposed PRMA method show a performance improvement than the existing PRMA protocol.

It is required for us to design multimedia synchronization model which present mixed media, tat contains not only continuous medial but also discontinuous media. And it is useful for us to develop multimedia application software. Proposed paper represents model tat expresses continuous media and discontinuous media. And continuous medial show the temporal relations between media objects then discontinuous media spatial relations. The model proposed in this paper is effective in applying the system to guarantee high quality of services and can process real time application form applying efficient multiple key media when events occur. We verified that the proposed model has improved media palyout rate compared with other previous synchronization models through simulation.

인터넷의 등장과 네트워킹 기술의 빠른 발전은 다양한 응용의 등장 및 사용자의 증가에 의한 대역폭 요구 증가 등의 변화를 가져왔다. 이러한 변화와 기존 라우터의 한계점으로 인해 스위칭과 라우팅 장비의 고성능화, 확장된 라우팅 기능 제공 등이 필요하게 되었고, 이를 위하여 IETF는 현재 MPLS라는 레이블 스위칭(Label Switching)방식을 표준화 중이다. 본 논문에서는 이 기술에 대한 성능을 분석하였다. 표준 및 스위치 개발이 연구 중인 현시점에서, 레이블 스위칭 기술의 성능 평가 결괴는 특히, ATM의 스위청 능력과 IP 계층 능력의 효율적인 활용의 기반 자료가 될 것이다. 본 논문은 라우터와 레이블 스위치를 포함하는 망을 구성하고 NLANR에서 제공하는 인터넷 트래픽을 입력 트래픽 소스로 하여 성능 평가를 수행하였으며, 레이블 스위칭의 구조 및 ATM testbed에서의 구현시, 이 기술이 갖는 스위칭의 기능성 및 성능을 분석하였다.

In this paper, we analyzed the reach performance of the FLC-C VDSL system using 4-CAP modulation scheme. We measured the attenuation of VDSL lines and their noise characteristics, and calculated the channel capacity. And then, we evaluated the VDSL coverage fro each type of cables; CPEV 0.5mm, CPEV 0.65mm, UTP3 0.5mm, UTP5 0.5mm, FS 0.4mm, FS 0.5mm. In case that FLC-C VDSL modern transmits 25.92 Mbps data over a UTP5 0.5mm cable, the VDSL reach appears to be about 570mm.

Bidirectional cable TV networks using HFC(Hybrid Fiber Coaxial) networks need MAC (Medium access control) protocols to have efficient access in upstream channels. In this paper, we have studied and evaluated several contention resolution algorithms and mapping of higher layer traffic described in IEEE 802.14 and MCNS (Multimedial Cable Network System) MAC protocols with respect to IP, ABR and CBR traffic types. IEEE 802.14 MAC protocol demonstrates better performance for transmitting ATM cells while the MCNS MAC protocols for the IP traffic.

The number of quantization bits of the input signals $X_k$,$Y_k$ need to be optimally determined through the trade-off between the H/W complexity and the BER performance in Turbo codes applications. Also, an effective means to incorporate a channel reliability $L_c$ in the Log-MAP-based Turbo decoding is highly required. because it has a major effect on both the complexity and the performance. In this paper, a novel bit-shifting approach that substitutes for the multiplying is proposed so as to effectively incorporate. $L_c$ in Turbo decoding. The optimal number of quantization bits of $X_k$,$Y_k$ is investigated through Monte-Carlo simulations assuming that bit-shifting approach is adopted. In addition. The effects of an incorrect estimation of noise variance on the performance of Turbo codes is investigated. There is a confined range in which the effects of an incorrect estimation can be ignored.

This paper analysis the performance of joint receiving structure consisting of the decorrelating multiuser detection and beamfromenr-RAKE receive for DS-CDMA communication systems. In asynchronous transmission as the number of simultaneous users increase. the capacity of CDMA system becomes severly reduced due to the nonideal orthogonality between user-assigned PN sequences and improper power control. Accordingly, the CDMA receiving system becomes vulnerable to the multiple access interferences and the near-far problem under multipath fading channel environment. To withstand these undesired performance degradations, this paper proposes the new type of multiuser detection which has a form of the hybrid structure of concatenating beamformer-RAKE receiver and decorrelating multiuser detection. the beam former-RAKE receiver performs temporal and spatial diversity combining with alleviating fading effect and suppressing undesired interferences, and the multiuser detection plays a role of making the receiver robust to the near-far problem. Regarding the individual merit on the usage of either multiuser detection or beamformer-RAKE receiver, the hybrid one is expected to produce the enhanced performance in multipath fading CDMA channel. However major drawback of using decorrelating multiuser detection for practical deployment is arised from its computational complexity , which is exponentially increased as more number of users and transmitted symbols involve. To diminish the computational complexity, this paper exploits an efficient block Toeplitz inversion technique using matrix Levinson polynomial will be introduced. And this paper provided the mathematical analysis to show the efficiency of the proposed joint structure under the multipath propagation environment. And results of a series of exhaustive computer simulations are presented in order to demonstrate the overall performance of the proposed hybrid structure in multipath fading CDMA channel.

ABR (Available Bit Rate) 서비스는 ATM (Asynchronous Transfer Mode) 에서 데이터 응용을 지원하기 위하여 개발되었으며, TCP(Transmission Control Protocol) 는 현재 사용되는 데이터망에서 가장 널리 이용되는 트랜 스포트 계층 프로토콜이다. 따라서 TCP over ABR의 성능 향상은 대단히 중요한 문제이다. 본 논문에서는 RM (Resource Management)셀의 정보를 이용한 TCP congestion 윈도우 크기 조절을 제안한다. 제안된 방식의 사용으로 TCP 윈도우 크기 결정에 보다 신뢰성 있는 망 정보 (RM 셀 내의 ER 값)를 사용하게 된다. 시뮬레이션은 다양한 망 상황과 다양한 망 구성에서 행하여졌으며 시뮬레이션 결과는 제안된 방식의 시용으로 TCP의 성능이 월등히 향상됨을 보인다.

Multicast routing algorithms such PIM, CBT, BGMP use shared multicast routing trees and the location of the multicast tree has great impact on the packet delay. In this pater we propose three new center location algorithms and analyze their performance through simulation studies. these three algorithms consider as candidates for the center not only multicast group members but also a few non-members nodes. To select these non-member nodes, we first find all the shortest paths among every couple of members and consider either nodes which are most frequently visited during the process of finding shortest paths or nodes which lie at the center of a shortest path and are most frequently visited during the same process. There the proposed algorithms are able to find the better center than not only algorithms which consider only member nodes but also other algorithms which consider selected non-member nodes in addition ot member nodes. The proposed algorithms either incur too much overhead nor depend upon unicasting algorithms.

This paper presents a noble operation and maintenance system for the optical subscriber loops and its feasibility through several experiments. In this system, a broadband CW (Continuous Wave) light source I used as monitoring of testing signals. and a FGF(Fiber Grating Filter) of which reflective wavelength is independent, is inserted somewhere in each subscriber loop for the reflection of monitoring of testing signals. The propose of the system is quick decision. whether the loop is just fault or not. rather than detailed information of loop state. At present, most of operation and maintenance system for the optical subscriber loops adopts OTDR(optical time domain reflectometer) for testing function. the OTDR is useful for detailed test, but not adequate for simple test because of long testing time . And it is difficult to test PON network by using general OTDR that has a single-wavelength light source. Compared to using OTDR, the proposed system can afford to shorten testing time and to test PON network. Moreover, we can cut down the system cost by simplifying circuits of the optical light sources. Our results show that the proposed system operates well according to the purpose mentioned above.

A new video interpolation technique based on variable skip rate of video sequence is proposed in this paper. in the proposed technique. the determination whether a frame is skipped or not is done by the degree of motion complexity of the frame. If the motion complexity of a frame is low the frame is skipped. otherwise it is coded and transmitted. To determine the motion complexity of a frame a new technique using MEF (moving edge in frame),the set of pixels considered as moving edges in a frame. is introduced. In the course of decoding and interpolating of receiver., the motion field is segmented. For the purpose of dividing vector field morphological filtering is applied. Morphological filtering also used to smooth the boundaries between the changed and unchanged region. In the simulation results, the proposed technique shows higher quality and lower fluctuation of picture quality than the conventional techniques on conditioning of the same bit rate.

This pater presents a new fractal coding scheme to find more optimal transformation using the reference images which I determined by some criteria. After finding the transformations to minimize the distance between the original image and the reference images. we choose one of them which has the best performance. Conventional fractal coding schemes based on the collage theorem obtain the transformation to minimize the distance between an original image and its collage image because of heavy computation. In other words, it is because the optimal transformation and be obtained after the attractors of all the possible transformations are generated and then compared with an original image. As such a procedure is practically difficult to implement. the collage coding schemes using the theorem have widely used, We introduce the new scheme to overcome the complexity problem for the optimal transformation and be obtained, our scheme is evaluated. as compared with the optimal one, In general cases that the optimal one is unavailable. our scheme is also evaluated, as compared with the conventional schemes.

본 논문에서는 비트율이 매우 한정된 응용에 적용되는 초저속 동영상 부호화 표준인 H.236plus에 기반한 의미기반 율-제어 기법을 제안한다. 기존의 율-제어 기법들은 의미기반이 아닌 단순히 프레임에 대해 매크로 블록 단위로 최적의 양자화 파라미터를 설정해 정해진 비트율을 조정하나, 본 논문에서는 부호화 효율을 높이기 위해 의미 영역인식 및 우선권 부여를 통해 영역별로 최적의 양자화 파라미터를 설정함으로써 제약된 비트 내에서 주관적인 화질의 향상을 보이는 기법을 제안한다. 제안하고자하는 기법의 핵심은 부호화 시 배경에 해당하는 영역에 배정되는 비트량을 할당해 전경(얼굴) 영역에 비트 자원을 더 많이 배정함으로써 주관적인 화질을 보호, 개선하기 위한 것이다.

In the MPEG-4 standardization phase, many methods for coding the irregular shaped VOP (video object Plane) have been researched. Texture coding is one of interesting research items in the MPEG-4. There are the Low pass extrapolation (LPE) padding, the shape adaptive DCT (SA-DCT), and the Extension-Interpolation (EI)/2D-DCT proposed in [1] as texture coding methods. the EI/2D-DCT is the method extending and interpolating luminance values from and Arbitrarily Shaped (AS) image segment into an 8 x 8 block and transforming the extended and interpolated luminance values by the 8x8 DCT. although the EI/2D-DCT and the SA-DCT work well in coding the As image segments. they are degraded since they use one-dimensional (1-D) methods such as the 1D-EI and the 1D-DCT in the two-dimensional (2-D) space. in this paper, we analyze the performance of the EI/2D-DCTand propose a new non-symmetric sig-sag scanning method, which non-symmetrically scans the quantized coefficients in the DCT domain to improve the EI/2D-DCT.

본 논문에서는 복잡한 배경하에서 카메라가 움직이는 경우 스트레오 물체 추적을 위한 새로운 접근 방법으로 블록 정합 알고리즘을 사용하여 추적 물체와 배경을 분리한 후, 광 JTC를 이용해 주시각 및 팬/틸트 제어 값을 동시에 구함으로써 좌, 우측 카메라를 제어할 수 있는 스트레오 물체 추적 시스템을 제시하였다. 배경이 존재하는 여러 종류의 영상 프레임에 대한 추적실험 결과 배경 잡음에 강건하고 적응적으로 이동 물체의 위치를 추적할 수 있었으며, 광 JTC 시스템을 이용함으로써 스테레오 자동 물체추적 시스템의 실시간적 구현의 가능성을 제시하였다.

This paper presents a watermarking algorithm for embedding visually recognizable pattern (Mark, Logo, Symbol, stamping or signature) into the image. first, the color image(RGB model)is transformed in YCbCr model and then the Y component is transformed into 3-level wavelet transform. Next, the values are assembled with pattern watermark. PN(pseudo noise) code at spread spectrum communication method and mutilevel watermark weights. This values are inserted into discrete wavelet domain. In our scheme, new calculating method is designed to calculate wavelet transform with integer value in considering the quantization error. and we used the color conversion with fixed-point arithmetic to be easy to make the hardware hereafter. Also, we made the new solution using mutilevel threshold to robust to common signal distortions and malicious attack, and to enhance quality of image in considering the human visual system. the experimental results showed that the proposed watermarking algorithm was superior to other similar water marking algorithm. We showed what it was robust to common signal processing and geometric transform such as brightness. contrast, filtering. scaling. JPEG lossy compression and geometric deformation.

We compose the two-stage recurrent neural network that returns both signals of a hidden and an output layer to the hidden layer. It is tested on the basis of syllables for Korean spoken digit from /gong/to /gu. For these experiments, we adjust the neuron number of the hidden layer, the predictive order of input data and self-recurrent coefficient of the decision state layer. By the experimental results, the recognition rate of this neural network is between 91% and 97.5% in the speaker-dependent case and between 80.75% and 92% in the speaker-independent case. In the speaker-dependent case, this network shows an equivalent recognition performance to Jordan and Elman network but in the speaker-independent case, it does improved performance.

본 논문은 LQ-서보구조를 부분적 상태 피드백을 갖고 있는 PI제어기로 해석하여 LQ-서보형 PI 제어기를 제안하고 이를 설계하기 위하여서 종전의 LQ-servo 설계 기법의 설계 매개 변수에 가중치를 도입하여 설계 앨고리즘을 보다 유연성 있게 개발하는데 있다. 제안된 앨고리즘은 설계 루프 전달 함수의 최대 및 최소 특이값을 저주파와 고주파에서의 일치를 향상시킬수 있을 뿐만 아니라 성능 향상을 위해 루프 형상을 유연성 있게 설계할 수 있었다.

An efficient echo cancellation method, which controls the echo caused from the PSTN, is proposed. In our situation, the PSTN is connected to the mobile subscriber and the base-station which use different bit-rate CVSD(continuously variable slope delta modulation) coders and echo canceller is installed at the location of the base-station. By using the symmetry of the coder pairs. the proposed method shortens the echo pate length and reduces the nonlinear distortion inherent in the coders. And it is implemented in the decoded signal region, so fitted to the general-purpose DSP implementation. We also proposed a echo cancellation method using the combined bit-stream so as to implement without the multipliers onto the VLSI. It has an improved echo cancellation performance by reducing the high frequency noises in the coders. And it has an reduced complexity by reducing the excitation rate of the bit-stream.

본 논문에서는 벡터의 내적에 사용되는 Distributed Arithmetic의 ROM 면적을 줄일 수 있는 방법을 제시한다. 제안된 방법을 이용하여 만든 ROM table은 그 크기가 기존 방법에 비해 반으로 감소되며 새로 생성된 ROM table에 같은 방법을 반복 적용함으로써 그 크기를 계속 1/2씩 감소시킬 수 있다. 반면에 ROM table을 반으로 줄일 때마다 논리회로의 첨가로 인한 하드웨어의 증가와 critical path의 증가가 발생하는데, 이들 오버헤드를 최소화할 수 있는 방법과 전체적인 면적 감소 효과를 극대화 할 수 있는 방법을 함께 제시한다. 제시한 방법을 적용함으로써 약 50%까지의 하드웨어를 감소시킬 수 있음을 예를 통하여 보인다.