• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.397-409
• /
• 1993

This paper proposed the design methodology of the 8 bit binary parallel adder with carry book-ahead scheme via current-mode CMOS multivalued logic and simulated the proposed adder under $5{\mu}m$ standard IC process technology. The threshold conditions of $G_K$ and $P_K$ which are needed for m-valued parallel adder with CLA are evaluated and adopted for quaternary logic. The design of quaternary CMOS logic circuits, encoder, decoder, mod-4 adder, $G_K$ and $P_K$ detecting circuit and current-voltage converter is proposed and is simulated to prove the operations. These circuits are necessary for binary arithmetic using multivalued logic. By comparing with the conventional binary adder and the CCD-MVL adder, We show that the proposed adder cab be designed one look-ahead carry generator with 1-level structure under standard CMOS technology and confirm the usefulness of the proposed adder.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.163-166
• /
• 2004

모바일향 90nm DRAM을 개발하기 위하여 비대칭 채널 구조를 갖는 Recess Channel Array Transistor (RCAT)로 cell transistor를 구현하였다. DRAM cell transistor에서 junction leakage current 증가는 DRAM retention time 열화에 심각한 영향을 미치는 요인으로 알려져 있으며, DRAM의 minimum feature size가 점점 감소함에 따라 short channel effect의 영향으로 junction leakage current는 더욱 더 증가하게 된다. 본 실험에서는 short channel effect의 영향에 의한 junction leakage current를 감소시키기 위하여 Recess Channel Array Transistor를 도입하였고, cell transistor의 채널 영역을 비대칭으로 형성하여 data retention time을 증가시켰다. 비대칭 채널 구조을 이용하여 Recess Channel Array Transistor를 구현한 결과, sub-threshold 특성과 문턱전압, Body effect, 그리고, GIDL 특성에는 큰 유의차가 보이지 않았고, I-V특성인 드레인 포화전류(IDS)는 대칭 채널 구조인 transistor 대비 24.8% 정도 증가하였다. 그리고, data retention time은 2배 정도 증가하였다. 본 실험에서 얻은 결과는 향후 저전압 DRAM 개발과 응용에 상당한 기여를 할 것으로 기대된다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.45-52
• /
• 2009

We proposed a new pixel circuit and driving method for the large-area, high-luminance AMOLED applications in this study. We designed with the low-temperature poly-silicon(LTPS) thin film transistors(TFTs) that has poor uniformity but stable characteristic. To improve the uniformity of an image, the threshold voltage($V_{TH}$) and the mobility of the TFTs can be compensated together. The proposed method overcomes the previous methods for mobility compensation, and that is profitable for large-area applications. Black data insertion was introduced to improve the characteristics for moving images. AMOLED panel can operate in two compensation mode, so the luminance degradation by mobility compensation can be released. The scan driver for controlling the pixel circuits were optimized, and the compensation mode can be controlled simply by that. Final driving signal has large timing margin, and the panel operates stably. The pixel circuit was designed for 14.1" WXGA top-emission ANGLED panel. The non-uniformity of the designed panel was estimated under 5% for the mobility compensation time of 1us.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.526-532
• /
• 2015

We quantitatively investigated instability mechanisms under simultaneous positive gate and drain bias stress (SPGDBS) in self-aligned top-gate amorphous indium-zinc-oxide thin-film transistors. After SPGDBS ($V_{GS}=13V$and $V_{DS}=13V$), the parallel shift of the transfer curve into a negative $V_{GS}$ direction and the increase of on current were observed. In order to quantitatively analyze mechanisms of the SPGDBS-induced negative shift of threshold voltage (${\Delta}V_T$), we experimentally extracted the density-of-state, and then analyzed by comparing and combining measurement data and TCAD simulation. As results, 19% and 81% of ${\Delta}V_T$ were taken to the donor-state creation and the hole trapping, respectively. This donor-state seems to be doubly ionized oxygen vacancy ($V{_O}^{2+}$). In addition, it was also confirmed that the wider channel width corresponds with more negative ${\Delta}V_T$. It means that both the donor-state creation and hole trapping can be enhanced due to the increase in self-heating as the width becomes wider. Lastly, all analyzed results were verified by reproducing transfer curves through TCAD simulation.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.344-349
• /
• 2018

Low temperature variation of electrical characteristics for AlGaN/GaN/HEMT was studied. To investigate the effect of temperatures, transistor was cool down to $-178^{\circ}C$ and electrical characteristics were measured. The drain current density of an AlGaN/GaN HEMT with a gate length of $2{\mu}m$ was increased from 264 mA/mm to 388 mA/mm and the maximum transconductance was increased from 105 mS/mm to 134 mS/mm by decreasing the temperature to $-108^{\circ}C$. Also, the threshold voltage was shifted -0.39 V with the temperature. The reason for the variations was seemed to the reduced channel resistance corresponding to the temperature. However, most of the variation of the electrical characteristics takes places above $-108^{\circ}C$.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.17-22
• /
• 2009

Two different organic-inorganic hybrid thin film transistors (OITFTs) with the structures of glass/ITO/ZnO/PMMA/Al (staggered structure) and glass/ITO/PMMA/ZnO/Al (inverted staggered structure), were fabricated and their electrical and structural properties were compared. The ZnO thin films used as active channel layers were deposited by the atomic layer deposition (ALD) method at a temperature of $100^{\circ}C$. To investigate the effect of the substrates on their properties, the ZnO films were deposited on bare glass, PMMA/glass and ITO/glass substrates and their crystal properties and surface morphologies were analyzed. The structural properties of the ZnO films varied with the substrate conditions. The ZnO film deposited on the ITO/glass substrate showed better crystallinity and morphologies, such as a higher preferred c-axis orientation, lower FWHM value and larger particle size compared with the one deposited on the PMMA/glass substrate. The field effect mobility ($\mu$), threshold voltage ($V_T$) and $I_{on/off}$ switching ratio for the OITFT with the staggered structure were about $0.61\;cm^2/V{\cdot}s$, 5.5 V and $10^2$, whereas those of the OITFT with the inverted staggered structure were found to be $0.31\;cm^2/V{\cdot}s$, 6.8 V and 10, respectively. The improved electrical properties for the staggered OITFTs may originate from the improved crystal properties and larger particle size of the ZnO active layer.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.38-47
• /
• 1989

A purely analytical model for HEMT's based on a two dimensional charge control simul-ation[4] is proposed. In this model proper treatment of diffusion effect of electron transport along a 2-DEG (two dimensional electron gas) channel is perfoemed. This diffusion effect is shown to effectively increase the bulk mibility and threshold voltage of the I-V curves compared to the existing models. The channel thickness and gate capacitance are expressed as functions of gate voltages covering subthreshold characteristics of HEMT's analytically. By introducing the finite channel opening and an effiective channel-length modulation, the solpe of the saturation region of the I-V curves ws modeled. The smooth transition of the I-V curves at linear-to-saturation regions of the I-V curves was possible using the continuous Troffimenkoff-type of field dependent mobility. Furthermore, a correction factor f was introduced to account for the finite transition section forming between a GCA and a saturated section. This factor removes large discrepancies in the saturation region of the I-V curve predicted by existing l-dimensional models.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.21-29
• /
• 2004

Hot carrier degradation characteristics of Nano-scale CMOSFETs with dual gate oxide have been analyzed in depth. It is shown that, PMOSFET lifetime dominate the device lifetime than NMOSFET In Nano-scale CMOSFETs, that is, PMOSFET lifetime under CHC (Channel Hot Carrier) stress is much lower than NMOSFET lifetime under DAHC (Dram Avalanche Hot Carrier) stress. (In case of thin MOSFET, CHC stress showed severe degradation than DAHC for PMOSFET and DAHC than CHC for NMOSFET as well known.) Therefore, the interface trap generation due to enhanced hot hole injection will become a dominant degradation factor in upcoming Nano-scale CMOSFET technology. In case of PMOSFETs, CHC shows enhanced degradation than DAHC regardless of thin and thick PMOSFETs. However, what is important is that hot hole injection rather than hot electron injection play a important role in PMOSFET degradation i.e. threshold voltage increases and saturation drain current decreases due to the hot carrier stresses for both thin and thick PMOSFET. In case of thick MOSFET, the degradation by hot carrier is confirmed using charge pumping current method. Therefore, suppression of PMOSFET hot carrier degradation or hot hole injection is highly necessary to enhance overall device lifetime or circuit lifetime in Nano-scale CMOSFET technology

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.34-41
• /
• 1984

MOEN/MO double layer which is to be used It)r the RMOS (refractory metal oxide semiconductor) gate material has been fabricated by means of low temperature reactive sputtering in N2 and Ar mixture. Good Mo2N film was obtained in the volumetric mixture of Ar:N2=95:5. The sheet resistance of the fabricated Mo7N film was about 1.20 - 1.28 ohms/square, which is about an order of magnitude lower than that of polysilicon film, and this would enable to improve the operational speed of devices fabricated with this material. When PSG (phosphorus silicate glass) was used as impurity diffusion source for the source and drain of the RMOSFET in the N2 atmosphere at about 110$0^{\circ}C$, the Mo2N was reduced to Mo resulting in much smaller sheet resistance of about 0.38 ohm/square. The threshold voltage of the RMOSFET fabricated in our experiment was - 1.5 V, and both depletion and enhancement mode RMOSFETs could be obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1114-1122
• /
• 2005

In this paper, the study of a design, fabrication and measurement of the receiver MMIC LNA, mixer for S-band application is described. The LNA is designed by 2-stage common source. The mixer is composed of active LO and RF balun to integrate on a chip and applied a newly proposed bias circuit to compensate the process variations of active devices. The LNA has 15.51 dB-gain and 1.02dB-Noise Figure at 2.1 GHz. The conversion gain of the mixer is -12 dB, IIP3 is approximately 4.25 dBm and port-to-port isolation is over 25 dB. The newly proposed bias circuit is composed of a few FETs and resistors, and can compensate the variation of the threshold voltage by the process variations, temperature changes and etc. The designed chip size is $1.2[mm]\times1.4[mm]$.