• 한국소음진동공학회논문집
• /
• 제21권8호
• /
• pp.741-751
• /
• 2011

Vibrations caused by automobile engine are absorbed mostly by a passive-type engine mount. However, user specifications for automobile vibrations require more stringent conditions and higher standard. Hence, active-type engine mounts have been developed to cope with such specifications. In this study, the active vibration absorber which can be attached to the sub-frame of automobile is used for the suppression of vibrations caused by engine. The active vibration absorbing system consists of sensor, actuator and controller where a control algorithm is implemented using DSP. The vibration caused by engine reveals harmonic disturbances varying with engine revolution. Therefore, the control algorithm should be able to cope with harmonic disturbances. In this study, the modified higher harmonic control technique which can selectively suppress harmonic disturbance is considered. Experimental results on automobile show that the proposed active vibration absorbing system is effective in suppressing vibrations caused by engine.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1659-1669
• /
• 2018

An improved circulating current suppression control method is proposed in this paper. In the proposed controller, an outer loop of the average capacitor voltage control model is used to balance the sub-module capacitor voltage. Meanwhile, an individual voltage balance controller and an arm voltage balance controller are also used. The DC and harmonic components of the circulating current are separated using a low pass filter. Therefore, a multiple quasi-proportional-resonant (multi-quasi-PR) controller is introduced in the inner loop to eliminate the circulating harmonic current, which mainly contains second-order harmonic but also contains other high-order harmonics. In addition, the parameters of the multi-quasi-PR controller are designed in the discrete domain and an analysis of the stability characteristic is given in this paper. In addition, a simulation model of a three-phase MMC system is built in order to confirm the correctness and superiority of the proposed controller. Finally, experiment results are presented and compared. These results illustrate that the improved control method has good performance in suppressing circulating harmonic current and in balancing the capacitor voltage.

• Korean Journal of Mathematics
• /
• 제30권3호
• /
• pp.459-465
• /
• 2022

We exhibit various properties of the weighted Berezin operator T_α and its iteration T^k_α on L^p(𝜏), where α > -1 and 𝜏 is the invariant measure on the complex unit ball B_n. Iterations of T_α on L¹_R(𝜏) the space of radial integrable functions have performed important roles in proving 𝓜-harmonicity of bounded functions with invariant mean value property. We show differences between the case of 1 < p < ∞ and p = 1, ∞ under the infinite iteration of T_α or the infinite summation of iterations, most of which are extensions or related assertions to the propositions of the previous results.

• 산업기술연구
• /
• 제32권A호
• /
• pp.115-118
• /
• 2012

Recently, there are a lot of papers in order to replace the electrolytic capacitor into the film capacitor in output of PFC(Power Factor Correction). However, the film capacitor, which has capacitance of low values, causes a large ripple voltage in output of PFC. The LED drivers are connected series in the output of PFC and affected by the magnitude of voltage ripple. In this paper, we have compared the fixed frequency method with the variable frequency for the constant-current control and propose the control method to avoid the sub-harmonic oscillation in the variable input voltage. An 80W PFC, using film capacitors instead of electrolytic capacitors, and LED driver has been built and compared the fixed frequency control method with the variable frequency control method.

• Journal of information and communication convergence engineering
• /
• 제17권4호
• /
• pp.285-289
• /
• 2019

A 1.9-GHz linear CMOS power amplifier is presented. An adaptive bias circuit (ABC) that utilizes an AC ground to detect the power level of the input signal is proposed to enhance the linearity and efficiency of the power amplifier. The ABC utilizes the second harmonic component as the input to mitigate the distortion of the fundamental signal. The input power level of the ABC was detected at the AC ground located at the V_DD node of the power amplifier. The output of the ABC was fed into the inputs of the power stage. The input signal distortion was mitigated by detecting the input power level at the AC ground. The power amplifier was designed using a 180 nm RFCMOS process to evaluate the feasibility of the application of the proposed ABC in the power amplifier. The measured output power and power-added efficiency were improved by 1.7 dB and 2.9%, respectively.

• 대한수학회보
• /
• 제60권1호
• /
• pp.171-184
• /
• 2023

In this paper, we show that a complete translating soliton Σ^m in ℝⁿ for the mean curvature flow is stable with respect to weighted volume functional if Σ satisfies that the L^m norm of the second fundamental form is smaller than an explicit constant that depends only on the dimension of Σ and the Sobolev constant provided in Michael and Simon [12]. Under the same assumption, we also prove that under this upper bound, there is no non-trivial f-harmonic 1-form of L²_f on Σ. With the additional assumption that Σ is contained in an upper half-space with respect to the translating direction then it has only one end.

• 대한수학회지
• /
• 제61권1호
• /
• pp.183-205
• /
• 2024

In this paper, for an m-dimensional (m ≥ 5) complete non-compact submanifold M immersed in an n-dimensional (n ≥ 6) simply connected Riemannian manifold N with negative sectional curvature, under suitable constraints on the squared norm of the second fundamental form of M, the norm of its weighted mean curvature vector |H_f| and the weighted real-valued function f, we can obtain: • several one-end theorems for M; • two Liouville theorems for harmonic maps from M to complete Riemannian manifolds with nonpositive sectional curvature.

• 대한수학회지
• /
• 제38권2호
• /
• pp.469-483
• /
• 2001

The configuration space and phase space oscillatory path integrals are computed in the case of the stochastic Schrodinger equation for the harmonic oscillator with a stochastic term of the form (K$\psi$(sub)t)(x) o dW(sub)t, where K is either the position operator or the momentum operator, and W(sub)t is the Wiener process. In this way formulae are derived for the stochastic analogues of the Mehler kernel.

• 전기전자학회논문지
• /
• 제8권1호
• /
• pp.79-85
• /
• 2004

본 논문은 APDP(Anti-parallel diode pair)를 이용한 5.8 GHz 무선 랜용 서브 하모닉 혼합기를 설계하였다. 기존의 혼합기는 LO와 RF를 혼합하여 두 주파수의 차로서 IF 신호를 얻는다. 그래서 주파수가 높아질수록, 안정되고, 높은 출력을 갖고, 우수한 위상잡음 특성을 갖는 LO 발진기가 필요하다. 그러나 APDP를 이용한 서브 하모닉 혼합기는 LO 신호의 제 2 고조파를 이용하여 혼합 작용을 한다. 그래서 기존의 혼합기에서 필요한 LO 주파수가 1/2로 줄어드는 장점이 있다. 제작된 SHP 혼합기의 변환손실은 LO 신호전력이 3 dBm일 때, 12.83 dB이다. LO/IF, 2LO/IF, RF/IF, LO/RF의 분리도 특성은 39.17 dB, 58 dB, 34 dB, 67.9 dB이다. 그리고 IIP3는 8 dBm이다.

• 대한전자공학회논문지TC
• /
• 제44권7호통권361호
• /
• pp.7-11
• /
• 2007

본 논문에서는 다중밴드 직접 변환 수신기를 위한 Octa-Phase 전압 제어 발진기를 제안하였다. Octa-Phase 신호와 저 위상잡음을 얻기 위해 4개의 LC VCO를 직렬 커플링 트랜지스터를 이용해 연결하였다. 멀티 밴드 특성을 얻기 위해 밴드 튜닝 회로가 제안되었다. MOS 스위치가 켜짐/꺼짐에 따라서 주파수 범위는 변화한다. 2개의 veractor를 사용해 VCO의 발진 주파수의 공정상의 오차를 최소화하였다. 본 논문에서는 0.18 um CMOS 공정을 이용해 발진기를 설계하였다. 측정 결과 1.8V 공급전압에 12mA의 전류를 소모하였고, $885MHz^{\sim}1342MHz$ 사이의 범위에서 동작하여 3개의 표준(CDMA 20001x, WCDMA, WiBro)에서의 sub-harmonic 혼합기를 구동시킬 수 있는 동작 범위를 만족시킨다. 측정된 위상잡음은 각각 CDMA 2000 1x 대역에서는 -105dBc@100kHz, WCDMA 대역에서는 -115dBc@1MHz, WiBro 대역에서는 -130dBc@10MHz으로 나타났다.