Nowadays, most researchers and manufacturers always pay attention on wireless sensor networks (WSNs) due to its potential applications in many regions such as military, industrial and civilian areas. WSNs are the basic components of Internet of Things (IoT) and the key to machine-to-machine communications and the future Internet. Also, the security is an essential element for deploying WSNs. Recently the concept of trust-based mechanism was proposed in WSNs such as traditional cryptographic and authentication mechanisms. However, there is lack a survey on trust management for WSNs, IoT even future Internet. In this paper, we discuss the concept and potential application areas of trust management for WSNs and IoT worlds. Furthermore, we survey different trust management issues (i.e., cluster, aggregation, reputation). Finally, future research directions with respect to trust management in WSNs and future IoT world are provided. We give not only simple WSNs for IoT environments but also a simulated bootstrap platform to provide the discussion of open challenges and solutions for deploying IoT in Future Internet.

In this paper, we present a survey of security and privacy preserving issues in M2M communications in Cyber-Physical Systems. First, we discuss the security challenges in M2M communications in wireless networks of Cyber-Physical Systems and outline the constraints, attack issues, and a set of challenges that need to be addressed for building secure Cyber-Physical Systems. Then, a secure architecture suitable for Cyber-Physical Systems is proposed to cope with these security issues. Eventually, the corresponding countermeasures to the security issues are discussed from four aspects: access control, intrusion detection, authentication and privacy preserving, respectively. Along the way we highlight the advantages and disadvantages of various existing security schemes and further compare and evaluate these schemes from each of these four aspects. We also point out the open research issues in each subarea and conclude with possible future research directions on security in Cyber-Physical Systems. It is believed that once these challenges are surmounted, applications with intrinsic security considerations will become immediately realizable.

The concept of an "intelligent building" received significant attention from academic, industry and standard development organizations when technically termed a building management system (BMS). Wireless sensor networks (WSNs) and their recent development enhanced monitoring and control applications for the building's areas. This paper surveys and analyzes advantages of the main current and emerging approaches that may be fit for BMS. Specifically, we discuss challenges including interoperability, integration, overhead, and bandwidth limitation of WSNs in BMS. Based on analyses, we highlight the advantages of an IP-based and RESTful architecture approach as the most suitable solution for BMS using WSNs (BMS-WSN). The paper also describes our future direction and design for BMS-WSN based on these advantages. The purpose is to enable interaction of users with BMS-WSN in the same way as with any website while ensuring energy efficiency. A test-bed implementation and evaluation of a BMS application is also introduced in this paper to demonstrate the feasibility and benefits of IP-based and RESTful architecture for BMS.

The number of smart phone users is rapidly growing due to recent increase in wireless Internet usage, development of a wide variety of applications, and activation of M2M (Machine to machine) services. Although the smart phone offers benefits of mobility and convenience, it also has serious security problems. To utilize M2M services in the smart phone, a flexible integrated authentication and access control facility is an essential requirement. To solve these problems, we propose a context-aware single sign-on and access control system that uses context-awareness, integrated authentication, access control, and an OSGi service platform in the smart phone environment. In addition, we recommend Fuzzy Logic and MAUT (Multi-Attribute Utility Theory) in handling diverse contexts properly as well as in determining the appropriate security level. We also propose a security system whose properties are flexible and convenient through a typical scenario in the smart phone environment. The proposed context-aware security system can provide a flexible, secure and seamless security service by adopting diverse contexts in the smart phone environment.

M2M (Machine-to-Machine) Technology makes it possible to network all kinds of terminal devices and their corresponding enterprise applications. Therefore, several M2M platforms were developed in China in order to collect information from terminal devices dispersed all over the local places through 3G wireless network. However, when enterprise applications try to integrate with M2M platforms, they should be maintained and refactored to adapt the heterogeneous features and properties of M2M platforms. Moreover, syntactical and semantic unification for information sharing among applications and devices are still unsolved because of raw data transmission and the usage of distinguished business vocabularies. In this paper, we propose and develop an M2M Middleware to support agile application integration with M2M platform. This middleware imports the event engine and XML-based syntax to handle the syntactical unification, makes use of Ontology-based semantic mapping to solve the semantic unification and adopts WebService and ETL techniques to sustain multi-pattern interactive approach, in order to agilely make applications integrated with the M2M platform. Now, the M2M Middleware has been applied in the China Telecom M2M platform. The operation results show that applications will cost less time and workload when being integrated with M2M platform.

New trend called ubiquitous leads the recent business by standardization and integration. It should be the main issue how to guarantee the integration and accountability on each business, especially in mission critical system which is mainly supported by M2M (Machine to Machine) control mechanism. This study is from the analysis of digital forensics case study that is from the M2M Sensing Control Mechanism problem of the "Imjin River" case in 2009, where a group of family is swept away to death by water due to M2M control error. The ubiquitous surroundings bring the changes in the field of criminal investigation to real time controls such as M2M systems. The needs of digital forensics on M2M control are increasing on every crime scene but we suffer from the lack of control metrics to get this done efficiently. The court asks for more accurately analyzed results accounting high quality product development design. Investigators in the crime scene need real-time analysis against the crime caused by poor quality of mission critical systems. It seems to be every need of Real-Time-Enterprise, so called ubiquitous society on the case. We try to find the efficiency and productivity in discovering non-functional design defects in M2M convergence products focusing on three metrics in study model with quick implementation. Digital forensics system in present status depends on know-how of each investigator and is hard to expect professional analysis on every field. This study set up a hypothesis "Co-working of professional investigators on each field will qualify Performance and Integrity" especially in mission critical system such as M2M and suggests "Online co-work analysis model" to efficiently detect and prevent mission critical errors in advance. At the conclusion, this study proved the statistical research that was surveyed by digital forensics specialists around M2M crime scene cases with quick implementation of dash board.

Service provision and consumption platforms are more and more used to enable communication between sensors, actuators and intelligent devices, since they provide mechanisms that make possible the combination of components to create composed services. However, these kinds of platforms have limitations to adapt themselves to new and unknown devices. In this work we analyze the challenge of component or bundle communication by using the Open Services Gateway Initiative (OSGi) technology and we propose three mechanisms with the aim of contributing to flexible component communication: Common Service, Specific Service and WSIF Web Service Invocation. We provide these solutions with some architectural models and validate them through different example services. Finally we compare them regarding performance, flexibility and application complexity.

As one of the four basic technologies of IOT (Internet of Things), M2M technology whose advance could influence on the technology of Internet of Things has a rapid development. Mobile Payment is one of the most widespread applications in M2M. Due to applying wireless network in Mobile Payment, the security issues based on wireless network have to be solved. The technologies applied in solutions generally include two sorts, encryption mechanism and authentication mechanism, the focus in this paper is the authentication mechanism of Mobile Payment. In this paper, we consider that there are four vital things in the authentication mechanism of Mobile Payment: two-way authentication, re-authentication, roaming authentication and inside authentication. Two-way authentication is to make the mobile device and the center system trust each other, and two-way authentication is the foundation of the other three. Re-authentication is to re-establish the active communication after the mobile subscriber changes his point of attachment to the network. Inside authentication is to prevent the attacker from obtaining the privacy via attacking the mobile device if the attacker captures the mobile device. Roaming authentication is to prove the mobile subscriber's legitimate identity to the foreign agency when he roams into a foreign place, and roaming authentication can be regarded as the integration of the above three. After making a simulation of our proposed authentication mechanism and analyzing the existed schemes, we summarize that the authentication mechanism based on the mentioned above in this paper and the encryption mechanism establish the integrate security framework of Mobile Payment together. This makes the parties of Mobile Payment apply the services which Mobile Payment provides credibly.

In recent years, machine-to-machine (M2M) communications are under rapid development to meet the fast-increasing requirements of multi-type wireless services and applications. In order to satisfy M2M communications requirements, heterogeneous networks convergence appears in many areas, i.e., mobile cellular networks (MCNs) and wireless sensor networks (WSNs) are evolving from heterogeneous to converged. In this paper, we introduce the system architecture and application requirement for converged MCN and WSN, where mobile terminals in MCN are acting as both sensor nodes and gateways for WSN. And then, we discuss the joint optimization of converged networks for M2M communications. Finally, we discuss the technical challenges in the converged process of MCN and WSN.

In this paper we present a novel method of applying image scrambling technology which belongs to the information hiding field in the error control coding to introduce confidentiality in wireless machine to machine communication. The interleaver in serial concatenated convolutional codes, which is the key module in overcoming burst errors, is deliberately designed with the scrambling function to provide a low error rate for those authorized transceivers. By contrast, the unauthorized transceivers without keys would get so high an error rate that decoding bits could bring little value, thus realizing both the confidentiality and reliability in wireless machine to machine communication.

In this paper, we first survey cross-layer architectures for Wireless Sensor Networks (WSNs) and Wireless Multimedia Sensor Networks (WMSNs). Afterwards, we propose a novel cross-layer architecture for QoS provisioning in clustered and multi-hop based WMSNs. The proposed architecture provides support for multiple network-based applications on a single sensor node. For supporting multiple applications on a single node, an area in memory is reserved where each application can store its network protocols settings. Furthermore, the proposed cross-layer architecture supports heterogeneous flows by classifying WMSN traffic into six traffic classes. The architecture incorporates a service differentiation module for QoS provisioning in WMSNs. The service differentiation module defines the forwarding behavior corresponding to each traffic class. The forwarding behavior is primarily determined by the priority of the traffic class, moreover the service differentiation module allocates bandwidth to each traffic class with goals to maximize network utilization and avoid starvation of low priority flows. The proposal incorporates the congestion detection and control algorithm. Upon detection of congestion, the congested node makes an estimate of the data rate that should be used by the node itself and its one-hop away upstream nodes. While estimating the data rate, the congested node considers the characteristics of different traffic classes along with their total bandwidth usage. The architecture uses a shared database to enable cross-layer interactions. Application's network protocol settings and the interaction with the shared database is done through a cross-layer optimization middleware.

It is expected that device-to-device (D2D) communication is allowed to underlay future cellular networks such as IMT-Advanced for spectrum efficiency. This article studies the mechanisms of D2D communication and interference avoidance when the D2D subsystem reuses uplink resources and downlink spectrums with a cellular system, respectively. We firstly propose an effective scheme to establish and maintain D2D communication. Moreover, a novel method to deal with the resource allocation and interference avoidance issues by utilizing the network peculiarity of a hybrid network to share the uplink resource is proposed. Most research focuses on reusing the uplink spectrums, but how to share the downlink frequency bands is seldom addressed. To share the downlink spectrums and avoid the interference to the primary cellular devices, a labeled time slots based mechanism is proposed. Implementation details are described in a real cellular system and simulation results prove that satisfying performance can be achieved by using the proposed mechanisms.

Advances in MEMS and CMOS technologies have motivated the development of low cost/power sensors and wireless multimedia sensor networks (WMSN). The WMSNs were created to ubiquitously harvest multimedia content. Such networks have allowed researchers and engineers to glimpse at new Machine-to-Machine (M2M) Systems, such as remote monitoring of biosignals for telemedicine networks. These systems require the acquisition of a large number of data streams that are simultaneously generated by multiple distributed devices. This paradigm of data generation and transmission is known as event-streaming. In order to be useful to the application, the collected data requires a preprocessing called data fusion, which entails the temporal alignment task of multimedia data. A practical way to perform this task is in a centralized manner, assuming that the network nodes only function as collector entities. However, by following this scheme, a considerable amount of redundant information is transmitted to the central entity. To decrease such redundancy, data fusion must be performed in a collaborative way. In this paper, we propose a collaborative data alignment approach for event-streaming. Our approach identifies temporal relationships by translating temporal dependencies based on a timeline to causal dependencies of the media involved.

Wireless networks composed of multimedia-enabled resource-constrained sensor nodes have enriched a large set of monitoring sensing applications. In such communication scenario, however, new challenges in data transmission and energy-efficiency have arisen due to the stringent requirements of those sensor networks. Generally, congested nodes may deplete the energy of the active congested paths toward the sink and incur in undesired communication delay and packet dropping, while bit errors during transmission may negatively impact the end-to-end quality of the received data. Many approaches have been proposed to face congestion and provide reliable communications in wireless sensor networks, usually employing some transport protocol that address one or both of these issues. Nevertheless, due to the unique characteristics of multimedia-based wireless sensor networks, notably minimum bandwidth demand, bounded delay and reduced energy consumption requirement, communication protocols from traditional scalar wireless sensor networks are not suitable for multimedia sensor networks. In the last decade, such requirements have fostered research in adapting existing protocols or proposing new protocols from scratch. We survey the state of the art of transport protocols for wireless multimedia sensor networks, addressing the recent developments and proposed strategies for congestion control and loss recovery. Future research directions are also discussed, outlining the remaining challenges and promising investigation areas.

In this paper, we propose a novel routing protocol called the Cartography Enhanced OLSR (CE-OLSR) for multi hop mobile ad hoc networks (multi hop MANETs). CE-OLSR is based on an efficient cartography gathering scheme and a stability routing approach. The cartography gathering scheme is non intrusive and uses the exact OLSR reduced signaling traffic, but in a more elegant and efficient way to improve responsiveness to the network dynamics. This cartography is a much richer and accurate view than the mere network topology gathered and used by OLSR. The stability routing approach uses a reduced view of the collected cartography that only includes links not exceeding a certain distance threshold and do not cross obstacles. In urban environments, IEEE 802.11 radio signals undergo severe radio shadowing and fading effects and may be completely obstructed by obstacles such as buildings. Extensive simulations are conducted to study the performances of CE-OLSR and compare them with those of OLSR. We show that CE-OLSR greatly outperforms OLSR in delivering a high percentage of route validity, a much higher throughput and a much lower average delay. In particular the extremely low average delay exacerbated by CE-OLSR makes it a viable candidate for the transport of real time data traffic in multi hop MANETs.

Spectrum sensing is an important functionality for cognitive users to look for spectrum holes before taking transmission in dynamic spectrum access model. Unlike previous works that assume perfect knowledge of the SNR of the signal received from the primary user, in this paper we consider a realistic case where the SNR of the primary user's signal is unknown to both fusion center and cognitive radio terminals. A Kalman filter based adaptive Takagi and Sugeno's fuzzy system is designed to make the global spectrum sensing decision based on the observed energies from cognitive users. With the capacity of adapting system parameters, the fusion center can make a global sensing decision reliably without any requirement of channel state information, prior knowledge and prior probabilities of the primary user's signal. Numerical results prove that the sensing performance of the proposed scheme outperforms the performance of the equal gain combination based scheme, and matches the performance of the optimal soft combination scheme.

Since Internet Protocol (IP) is the most important protocol in Next Generation Networks (NGNs), 3rd Generation Partnership Project (3GPP) utilizes Session Initial Protocol (SIP) based on IP as the base protocol for negotiating sessions in IP Multimedia Subsystem (IMS). Different from traditional circuit-switched network, in IMS, the media traffic and signaling are delivered through IP transport. The media traffic may affect the signaling efficiency in core network, due to traffic collisions and best effort packets delivery. This paper proposes a novel path-migration mechanism for enhancing the traffic efficiency in integrated NGN-IMS. The simulation results show that the interference and traffic collision can be reduce by applying proposed path-migration mechanism and the signaling efficiency in core network can be improved with higher system capability and voice quality.

Orthogonal Frequency Division Multiplexing (OFDM) is usually regarded as a spectral efficient multicarrier modulation technique, yet it suffers from a high peak-to-average power ratio (PAPR) problem. Among all the existing PAPR reduction techniques in OFDM systems, side information based PAPR reduction techniques such as partial transmit sequence (PTS) and selective mapping (SLM) schemes, have attracted the most attention. However, the transmission of side information results in somewhat spectral loss and this does not significantly improve the bit error rate (BER) performance. Parallel combinatory (PC) OFDM yields higher spectral efficiency (SE) and better BER performance on Gaussian channels,while is a little but not obvious PAPR improvement over the ordinary OFDM system. This investigation aimed to design a 'perfect' OFDM system. We introduce the side information to rotate the subcarrier phases of our novel PC-OFDM system structure, and call this new system the SIPC(Side information based Parallel Combinatory)-OFDM system. The proposed system achieves better PAPR and SE performance. In addition, considering the tradeoff of system parameters, the proposed system also has the properties of a higher BER.

The network topology for a wide area sensor network has to support connectivity and a prolonged lifetime for the many applications used within it. The concepts of structure and group in sociology are similar to the concept of cluster in wireless sensor networks. The clustering method is one of the preferred ways to produce a topology for reduced electrical energy consumption. We herein propose a cluster topology method based on sociological structures and concepts. The proposed sociological clustering topology (SOCT) is a method that forms a network in two phases. The first phase, which from a sociological perspective is similar to forming a state within a nation, involves using nodes with large transmission capacity to set up the global area for the cluster. The second phase, which is similar to forming a city inside the state, involves using nodes with small transmission capacity to create regional clusters inside the global cluster to provide connectivity within the network. The experimental results show that the proposed method outperforms other methods in terms of energy efficiency and network lifetime.

Most of the current frequency hopping (FH) based dynamic spectrum access (DSA) methods concern a reactive channel access scheme with synchronous inter-channel spectrum sensing, i.e., FH is reactively triggered by the primary user (PU)'s return reported by spectrum sensing, and the PU channel to be switched to is assumed precisely just sensed or ready to be sensed, as if the inter-channel spectrum sensing moments are synchronous. However, the inter-channel spectrum sensing moments are more likely to be asynchronous, which risks PU suffering more interference. Moreover, the spectrum sensing is usually erroneous, which renders the problem more complex. To address this problem, we propose a proactive FH based DSA method against both erroneous spectrum sensing and asynchronous inter-channel spectrum sensing (moments). We term it as proactive DSA. The optimal FH sequence is obtained by dynamic programming. The complexity is also analyzed. Finally, the simulation results confirm the effectiveness of the proposed method.

The ever-increasing demand for H.264 scalable video coding (H.264/SVC) distribution motivates researchers to devise ways to enhance the quality of video delivered on the Internet. Furthermore, researchers and practitioners in general depend on computer simulators to analyze or evaluate their designed network architecture or proposed protocols. Therefore, a complete toolset, which is called myEvalSVC, for evaluating the delivered quality of H.264/SVC transmissions in a simulated environment is proposed to help the network and video coding research communities. The toolset is based on the H.264 Scalable Video coding streaming Evaluation Framework (SVEF) and extended to connect to the NS2 simulator. With this combination, people who work on video coding can simulate the effects of a more realistic network on video sequences resulting from their coding schemes, while people who work on network technology can evaluate the impact of real video streams on the proposed network architecture or protocols. To demonstrate the usefulness of the proposed new toolset, examples of H.264/SVC transmissions over 802.11 and 802.11e are provided.

A joint template matching algorithm is proposed in this paper to reduce the high rate of miss-detection and false-alarm caused by the traditional template matching algorithm during the process of multi-object detection. The proposed algorithm can reduce the influence on each object by matching all objects together according to the correlation information among different objects. Moreover, the rate of miss-detection and false-alarm in the process of single-template matching is also reduced based on the algorithm. In this paper, firstly, joint template is created from the information of relative positions among different objects. Then, matching criterion according to normalized cross correlation is generated for multi-object matching. Finally, the proposed algorithm is applied to the detection of watermarks in bill. The experiments show that the proposed algorithm has lower miss-detection and false-alarm rate comparing to the traditional NCC algorithm during the process of multi-object detection.

Deploying advanced home networking technologies and modern home-networked devices in residential environments provides a playground for new home applications and services. Because home multimedia entertainment is among the most essential home applications, this paper presents an appealing home media content sharing scenario: home-networked devices can discover neighboring devices and share local media content, as well as enormous amounts of Internet media content in a convenient and networked manner. This ideal scenario differs from traditional usages that merely offer local media content and require tedious manual operations of connection setup and file transfer among various devices. To achieve this goal, this study proposes a proxy gateway architecture for home multimedia content distribution. The proposed architecture integrates several functional mechanisms, including UPnP-based device discovery, home gateway, Internet media provision, and in-home media content delivery. This design addresses several inherent limitations of device heterogeneity and network interoperability on home and public networks, and allows diverse home-networked devices to play media content in an identical and networked manner. Prototypical implementation of the proposed proxy gateway architecture develops a proof-of-concept software, integrating a BitTorrent peer-to-peer client, a UPnP protocol stack, and a UPnP AV media server, as well as media distribution and management components on the OSGi home gateway platform. Practical demonstration shows the proposed design and scenario realization, offering users an unlimited volume of media content for home multimedia entertainment.

Conventional rate control (RC) schemes for H.264 video coding usually regulate output bit rate to match channel bandwidth by adjusting quantization parameter (QP) at fixed full frame rate, and the passive frame skipping to avoid buffer overflow usually occurs when scene changes or high motions exist in video sequences especially at low bit rate, which degrades spatial-temporal quality and causes jerky effect. In this paper, an active content adaptive frame skipping scheme is proposed instead of passive methods, which skips subjectively trivial frames by structural similarity (SSIM) measurement between the original frame and the interpolated frame via motion vector (MV) copy scheme. The saved bits from skipped frames are allocated to coded key ones to enhance their spatial quality, and the skipped frames are well recovered based on MV copy scheme from adjacent key ones at the decoder side to maintain constant frame rate. Experimental results show that the proposed active SSIM-based frameskip scheme acquires better and more consistent spatial-temporal quality both in objective (PSNR) and subjective (SSIM) sense with low complexity compared to classic fixed frame rate control method JVT-G012 and prior objective metric based frameskip method.

In this paper, the analysis and design of a motion simulator (based on the approach taken by interactive virtual reality (VR) entertainment systems) is conducted. The main components of the system include a bilateral control interface, simulation and a motion simulator control scheme. The space entertainment system uses a virtual environment that enables operators to feel the actual feedback sensing and distorted motion from the virtual environment, just as they would in the real environment. The space entertainment system integrates the dynamics of the motion simulator and the virtual environment and the operator maneuvers a steering wheel to interact with the system. The multiple bilateral control schemes employ a dynamical controller, which is designed by considering the velocity and acceleration that the operator imposes on the joystick, the environmental changes imposed on the motion simulator. In addition, we develop a calculated method to evaluate the Ratio of the simulation results. It is shown that the proposed control scheme can improve the performance of the visual entertainment system. Experiments are conducted on the virtual reality entertainment system to validate the theoretical developments.