The aim of this study is to identify intelligent learning support functions in Learning Management System (LMS) to support university student learning activities during the transition from face-to-face classes to online learning. To accomplish this, we investigated the perceptions of students on the levels of importance and urgency toward learning support functions of LMS powered with Artificial Intelligent (AI) technology and analyzed the differences in perception according to student characteristics. As a result of this study, the function that students considered to be the most important and felt an urgent need to adopt was to give automated grading and feedback for their writing assignments. The functions with the next highest score in importance and urgency were related to receiving customized feedback and help on task performance processed as well as results in the learning progress. In addition, students view a function to receive customized feedback according to their own learning plan and progress and to receive suggestions for improvement by diagnosing their strengths and weaknesses to be both vitally important and urgently needed. On the other hand, the learning support function of LMS, which was ranked as low importance and urgency, was a function that analyzed the interaction between professors and students and between fellow students. It is expected that the results of this student needs analysis will be helpful in deriving the contents of learning support functions that should be developed as well as providing basic information for prioritizing when applying AI technology to implement learner-centered LMS in the future.

The elderly population is increasing owing to a low fertility rate and an aging population. In addition, life expectancy is increasing, and the advancement of medicine has increased the importance of health to most people. Therefore, government and companies are developing and supporting smart healthcare, which is a health-related product or industry, and providing related services. Moreover, with the development of the Internet, many people are managing their health through online searches. The most convenient way to achieve such management is by consuming nutritional supplements or seasonal foods to prevent a nutrient deficiency. However, before implementing such methods, knowing the nutrient status of the individual is difficult, and even if a test method is developed, the cost of the test will be a burden. To solve this problem, we developed a questionnaire related to nutrient classification twice, based upon which an adaptive algorithm was designed. This algorithm was designed as a machine learning based algorithm for nutrient classification and its accuracy was much better than the other machine learning algorithm.

In the midst of dynamic industrial changes, companies need data analysis considering the effects of integration of various technologies in order to establish innovative R & D strategies. However, the existing technology forecasting model evaluates individual technologies without considering relationship among them. To improve this problem, this study suggests a new methodology reflecting the integration of technologies. In the study, a technology forecasting indicator was developed using the technology integration index based on social network analysis. In order to verify the validity of the proposed methodology, 'drone task performance technology' based on patent data was applied to the research model. This study aimed to establish a theoretical basis to design a research model that reflects the degree of integration of technologies when conducting technology forecasting research. In addition, this study is meaningful in that it quantitatively verified the proposed methodology using actual patent data.

Social media play a significant role in communicating information across the globe, connecting with loved ones, getting the news, communicating ideas, etc. However, a group of people uses social media to spread fake information, which has a bad impact on society. Therefore, minimizing fake news and its detection are the two primary challenges that need to be addressed. This paper presents a multi-modal deep learning technique to address the above challenges. The proposed modal can use and process visual and textual features. Therefore, it has the ability to detect fake information from visual and textual data. We used EfficientNetB0 and a sentence transformer, respectively, for detecting counterfeit images and for textural learning. Feature embedding is performed at individual channels, whilst fusion is done at the last classification layer. The late fusion is applied intentionally to mitigate the noisy data that are generated by multi-modalities. Extensive experiments are conducted, and performance is evaluated against state-of-the-art methods. Three real-world benchmark datasets, such as MediaEval (Twitter), Weibo, and Fakeddit, are used for experimentation. Result reveals that the proposed modal outperformed the state-of-the-art methods and achieved an accuracy of 86.48%, 82.50%, and 88.80%, respectively, for MediaEval (Twitter), Weibo, and Fakeddit datasets.

At present, the smart grid has become one of the indispensable infrastructures in people's lives. As a commonly used communication method, wireless communication is gradually, being widely used in smart grid systems due to its convenient deployment and wide range of serious challenges to security. For the insecurity of the schemes based on large integer factorization and discrete logarithm problem in the quantum environment, an identity-based key management scheme for smart grid over lattice is proposed. To assure the communication security, through constructing intra-cluster and inter-cluster multi-hop routing secure mechanism. The time parameter and identity information are introduced in the relying phase. Through using the symmetric cryptography algorithm to encrypt improve communication efficiency. Through output the authentication information with probability, the protocol makes the private key of the certification body no relation with the distribution of authentication information. Theoretic studies and figures show that the efficiency of keys can be authenticated, so the number of attacks, including masquerade, reply and message manipulation attacks can be resisted. The new scheme can not only increase the security, but also decrease the communication energy consumption.

The number of industrial Internet of Things (IoT) users is increasing rapidly. Lightweight block ciphers have started to be used to protect the privacy of users. Hardware-oriented security design should fully consider the use of fewer hardware devices when the function is fully realized. Thus, this paper designs a lightweight block cipher IIoTBC for industrial IoT security. IIoTBC system structure is variable and flexibly adapts to nodes with different security requirements. This paper proposes a 4×4 S-box that achieves a good balance between area overhead and cryptographic properties. In addition, this paper proposes a preprocessing method for 4×4 S-box logic gate expressions, which makes it easier to obtain better area, running time, and power data in ASIC implementation. Applying it to 14 classic lightweight block cipher S-boxes, the results show that is feasible. A series of performance tests and security evaluations were performed on the IIoTBC. As shown by experiments and data comparisons, IIoTBC is compact and secure in industrial IoT sensor nodes. Finally, IIoTBC has been implemented on a temperature state acquisition platform to simulate encrypted transmission of temperature in an industrial environment.

With the expansion of digital communication networks, a considerable number of randomization techniques have been invented and implemented to enhance the different data transmission algorithms' levels of security. Steganography is among the data transmissions techniques used to hide secret data. Nowadays, several randomization techniques have been used in steganography to elevate the security of transmitted data. Unfortunately, the majority of these techniques lack some simplicity, efficiency, and flexibility, in addition to other limitations. This research presents a new randomization technique called Rand-Stego. Rand-Stego could be applied/practiced over any steganography technique. It provides simplicity and efficiency and elevates the security level. Examples of implementing the proposed technique on some steganography algorithms will be explored. The proposed and current techniques will be compared. The obtained results show Rand-Stego's superiority in terms of efficiency and flexibility when compared to the current techniques.

Cloud computing offers a platform that is both adaptable and scalable, making it ideal for outsourcing data for sharing. Various organizations outsource their data on cloud storage servers for availing management and sharing services. When the organizations outsource the data, they lose direct control on the data. This raises the privacy and security concerns. Cryptographic encryption methods can secure the data from the intruders as well as cloud service providers. Data owners may also specify access control policies such that only the users, who satisfy the policies, can access the data. Attribute based access control techniques are more suitable for the cloud environment as they cover large number of users coming from various domains. Multi-authority attribute-based encryption (MA-ABE) technique is one of the propitious attribute based access control technique, which allows data owner to enforce access policies on encrypted data. The main aim of this paper is to comprehensively survey various state-of-the-art MA-ABE schemes to explore different features such as attribute and key management techniques, access policy structure and its expressiveness, revocation of access rights, policy updating techniques, privacy preservation techniques, fast decryption and computation outsourcing, proxy re-encryption etc. Moreover, the paper presents feature-wise comparison of all the pertinent schemes in the field. Finally, some research challenges and directions are summarized that need to be addressed in near future.

The ARX-based lightweight block cipher is widely used in resource-constrained IoT devices due to fast and simple operation of software and hardware platforms. However, there are three weaknesses to ARX-based lightweight block ciphers. Firstly, only half of the data can be changed in one round. Secondly, traditional ARX-based lightweight block ciphers are static structures, which provide limited security. Thirdly, it has poor diffusion when the initial plaintext and key are all 0 or all 1. This paper proposes a new dynamic ARX-based lightweight block cipher to overcome these weaknesses, called DABC. DABC can change all data in one round, which overcomes the first weakness. This paper combines the key and the generalized two-dimensional cat map to construct a dynamic permutation layer P1, which improves the uncertainty between different rounds of DABC. The non-linear component of the round function alternately uses NAND gate and AND gate to increase the complexity of the attack, which overcomes the third weakness. Meanwhile, this paper proposes the round-based architecture of DABC and conducted ASIC and FPGA implementation. The hardware results show that DABC has less hardware resource and high throughput. Finally, the safety evaluation results show that DABC has a good avalanche effect and security.

Grant-free random access (GFRA) can reduce the access delay and signaling cost, and satisfy the short transmission packet and strict delay constraints requirement in internet of things (IoT). IoT is a major trend in the future, which is characterized by the variety of applications and devices. However, most existing studies on GFRA only consider a single type of device and omit the effect of access delay. In this paper, we study GFRA in multicell massive multipleinput multiple-output (MIMO) systems where different types of devices with various configurations and requirements co-exist. By introducing the backoff mechanism, each device is randomly activated according to the backoff parameter, and active devices randomly select an orthogonal pilot sequence from a predefined pilot pool. An analytical approximation of the average spectral efficiency for each type of device is derived. Based on it, we obtain the optimal backoff parameter for each type of devices under their delay constraints. It is found that the optimal backoff parameters are closely related to the device number and delay constraint. In general, devices that have larger quantity should have more backoff time before they are allowed to access. However, as the delay constraint become stricter, the required backoff time reduces gradually, and the device with larger quantity may have less backoff time than that with smaller quantity when its delay constraint is extremely strict. When the pilot length is short, the effect of delay constraints mentioned above works more obviously.

This paper proposes a non-orthogonal multiple access (NOMA) based low-complexity relaying approach for multiuser cellular two-way relay channels (CTWRCs). In the proposed scheme, the relay detects the signal using successive interference cancellation (SIC) and re-generates the transmit signal with zero-forcing (ZF) transmit precoding. The achievable data rates of the NOMA-based multiuser two-way relaying (TWR) approach is analyzed. We further study the power allocation among different data streams to maximize the weighted sum-rate (WSR). We re-form the resultant non-convex problem into a standard monotonic program. Then, we design a polyblock outer approximation algorithm to sovle the WSR problem.The proposed optimal power allocation algorithm converges fast and it is shown that the NOMA-TWR-OPA scheme outperforms a NOMA benchmark scheme and conventional TWR schemes.

In intelligent transportation systems, traffic management is an important task. The accurate forecasting of traffic characteristics like flow, congestion, and density is still active research because of the non-linear nature and uncertainty of the spatiotemporal data. Inclement weather, such as rain and snow, and other special events such as holidays, accidents, and road closures have a significant impact on driving and the average speed of vehicles on the road, which lowers traffic capacity and causes congestion in a widespread manner. This work designs a model for multivariate short-term traffic congestion prediction using SLSTM_AE-BiLSTM. The proposed design consists of a Bidirectional Long Short Term Memory(BiLSTM) network to predict traffic flow value and a Convolutional Neural network (CNN) model for detecting the congestion status. This model uses spatial static temporal dynamic data. The stacked Long Short Term Memory Autoencoder (SLSTM AE) is used to encode the weather features into a reduced and more informative feature space. BiLSTM model is used to capture the features from the past and present traffic data simultaneously and also to identify the long-term dependencies. It uses the traffic data and encoded weather data to perform the traffic flow prediction. The CNN model is used to predict the recurring congestion status based on the predicted traffic flow value at a particular urban traffic network. In this work, a publicly available Caltrans PEMS dataset with traffic parameters is used. The proposed model generates the congestion prediction with an accuracy rate of 92.74% which is slightly better when compared with other deep learning models for congestion prediction.

The underwater acoustic wireless communication networks are generally formed by the different autonomous underwater acoustic vehicles, and transceivers interconnected to the bottom of the ocean with battery deployed modems. Orthogonal frequency division multiplexing (OFDM) has become the most popular modulation technique in underwater acoustic communication due to its high data transmission and robustness over other symmetrical modulation techniques. To maintain the operability of underwater acoustic communication networks, the power consumption of battery-operated transceivers becomes a vital necessity to be minimized. The OFDM technology has a major lack of peak to average power ratio (PAPR) which results in the consumption of more power, creating non-linear distortion and increasing the bit error rate (BER). To overcome this situation, we have contributed our symmetry research into three dimensions. Firstly, we propose a machine learning-based underwater acoustic communication system through long short-term memory neural network (LSTM-NN). Secondly, the proposed LSTM-NN reduces the PAPR and makes the system reliable and efficient, which turns into a better performance of BER. Finally, the simulation and water tank experimental data results are executed which proves that the LSTM-NN is the best solution for mitigating the PAPR with non-linear distortion and complexity in the overall communication system.

In this article, the uplink achievable rate is investigated for massive multiple-input multiple-output (MIMO) under correlated Ricean fading channel, where each base station (BS) and user are both deployed multiple antennas. Considering the availability of prior knowledge at BS, two different channel estimation approaches are adopted with and without prior knowledge. Based on these channel estimations, a two-layer decoding scheme is adopted with maximum ratio precoding as the first layer decoder and optimal second layer precoding in the second layer. Based on two aforementioned channel estimations and two-layer decoding scheme, the exact closed form expressions for uplink achievable rates are computed with and without prior knowledge, respectively. These derived expressions enable us to analyze the impacts of line-of-sight (LoS) component, two-layer decoding, data transmit power, pilot contamination, and spatially correlated Ricean fading. Then, numerical results illustrate that the system with spatially correlated Ricean fading channel is superior in terms of uplink achievable rate. Besides, it reveals that compared with the single-layer decoding, the two-layer decoding scheme can significantly improve the uplink achievable rate performance.

Unmanned aerial vehicles (UAVs) and millimeter-wave frequencies play key roles in supporting 5G wireless communication systems. They expand the field of wireless communication by increasing the data capacities of communication systems and supporting high data rates. However, short wavelengths, owing to the high millimeter-wave frequencies can cause problems, such as signal attenuation and path loss. To address these limitations, research on high directional beamforming technologies continue to garner interest. Furthermore, owing to the mobility of the UAVs, it is essential to track the beam angle accurately to obtain full beamforming gain. This study presents a beam tracking method based on the unscented Kalman filter using hybrid beamforming. The simulation results reveal that the proposed beam tracking scheme improves the overall performance in terms of the mean-squared error and spectral efficiency. In addition, by expanding analog beamforming to hybrid beamforming, the proposed algorithm can be used even in multi-user and multi-stream environments to increase data capacity, thereby increasing utilization in new-radio multiple-input multiple-output orthogonal frequency-division multiplexing systems.