• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.410-411
• /
• 2008

Organic field-effect transistors (OFETs) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with different metal electrode. The CuPc FET device was made a top-contact type and the substrate temperature was room temperature. The source and drain electrodes were used an Au and Al materials. The CuPc thickness was 40nm, and the channel length was $50{\mu}m$, channel width was 3mm. We observed a typical current-voltage (I-V) characteristics in CuPc FET with different electrode materials.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.193-196
• /
• 2002

This paper presents the improvement of the boron penetration and the reverse short channel effect (RSCE) in the 130nm W/WNx/Poly-Si dual gate PMOSFET for a high performance embedded DRAM. In order to suppress the boron penetration, we studied a range in the process heat budget. It has shown that the process heat budget reduction results in suppression of the boron penetration. To suppress the RSCE, we experimented with the halo (large tilt implantation of the same type of impurities as those in the device well) implant condition near the source/drain. It has shown that the low angle of the halo implant results in the suppression of the RSCE. The experiment was supported from two-dimensional(2-D) simulation, TSUPREM4 and MEDICI.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.679-682
• /
• 2003

Improvement in MOS fabrication technology have led to high-density high-performance integrated circuits with MOSFET channel lengths in the sub-micron range. For devices of the size, transistor characteristics become highly sensitive to effective channel length. We propose a new approach to extract the effective channel length of MOSFET by Capacitance-Voltage (C-V) method. Gate-to-Source, Drain capacitance ( $C_{gsd}$) are measured and the effective channel length can be extracted. In addition, compared to l/$\beta$ method and Terada method, which has been point out that it fails to extract the accurate effective channel length of the devices, we prove that our approach still works well for the devices with down to sub-micron regime.e.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.146-151
• /
• 1995

We have studied the fabrication self aligned atmospheric pressure(AP) CVD a-Si thin film transistor with source-drain ohmic contact by using ion shower doping method. The conductivity is 6*10$^{-2}$S/cm when the acceleration voltage, doping time and doping temperature are 6kV, 90s and 350.deg. C, respectively. We obtained the field effect mobility of 1.3cm$^{2}$/Vs and the threshold voltage of 7V.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.2
• /
• pp.136-147
• /
• 2005

A theoretical design evaluation based on a hydrodynamic transport simulation of strained Si-SiGe on insulator (SSOI) type nMOSFETs is reported. Although, the net performance improvement is quite limited by the short channel effects, simulation results clearly show that the strained Si-SiGe type nMOSFETs are well-suited for gate lengths down to 20 nm. Simulation results show that the improvement in the transconductance with decreasing gate length is limited by the long-range Coulomb scattering. An influence of lateral and vertical diffusion of shallow dopants in the source/drain extension regions on the device performance (i.e., threshold voltage shift, subthreshold slope, current drivability and transconductance) is quantitatively assessed. An optimum layer thickness ($t_{si}$ of 5 and $t_{sg}$ of 10 nm) with shallow Junction depth (5-10 nm) and controlled lateral diffusion with steep doping gradient is needed to realize the sub-50 nm gate strained Si-SiGe type nMOSFETs.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.633-636
• /
• 2012

A dynamic analysis of an amorphous silicon (a-Si) thin film transistor liquid crystal display (TFT-LCD) pixel is presented using new a-Si TFT and liquid crystal (LC) capacitance models for a Simulation Program with Integrated Circuit Emphasis (SPICE) simulator. This dynamic analysis will be useful when predicting the performance of LCDs. The a-Si TFT model is developed to accurately estimate a-Si TFT characteristics of a bias-dependent gate to source and gate to drain capacitance. Moreover, the LC capacitance model is developed using a simplified diode circuit model. It is possible to accurately predict TFT-LCD characteristics such as flicker phenomena when implementing the proposed simulation model.

• Advances in nano research
• /
• v.3 no.1
• /
• pp.49-54
• /
• 2015

The structure represents symmetrical metal electrode (gate 1) - front $SiO_2$ layer - n-Si nanowire FET - buried $SiO_2$ layer - metal electrode (gate 2). At the symmetrical gate voltages high conductive regions near the gate 1 - front $SiO_2$ and gate 2 - buried $SiO_2$ interfaces correspondingly, and low conductive region in the central region of the NW are formed. Possibilities of applications of nanosize FETs at the deep inversion and depletion as a distributed capacitance are demonstrated. Capacity density is an order to ${\sim}{\mu}F/cm^2$. The charge density, it distribution and capacity value in the nanowire can be controlled by a small changes in the gate voltages. at the non-symmetrical gate voltages high conductive regions will move to corresponding interfaces and low conductive region will modulate non-symmetrically. In this case source-drain current of the FET will redistributed and change current way. This gives opportunity to investigate surface and bulk transport processes in the nanosize inversion channel.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.6
• /
• pp.662-667
• /
• 2013

The effect of fluorine ions, which can be reacted with boron in high-doped BPSG, is investigated on the contact sidewall wiggling profile in semiconductor process. In the semiconductor device, there are many contacts on $p^+/n^+$ source and drain region. However these types of wiggling profile is only observed at the $n^+$ contact region. As a result, we find that the type of plug implantation dopant can affect the sidewall wiggling profile of contact. By optimizing the proper fluorine gas flow rate, both the straight sidewall profile and the desired electrical characteristics can be obtained. In this paper, we propose a fundamental approach to improve the contact sidewall wiggling profile phenomena, which mostly appear in high-doped BPSG on next-generation DRAM products.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.5
• /
• pp.530-537
• /
• 2013

An explicit surface potential calculation method of gate-all-around MOSFET (GAAMOSFET) devices which takes into account both interface trap charge and varying doping levels is presented. The results of the method are extensively verified by numerical simulation. Results from the model are used to find qualitative and quantitative effect of interface trap charge on subthreshold slope (SS) of GAAMOSFET devices. Further, design constraints of GAAMOSFET devices with emphasis on the effect of interface trap charge on device SS performance are investigated.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.291-294
• /
• 1999

This paper presents a GaAs MESMET self oscillating mixer for high efficiency L-band frequency conversion with small chip area consumption. Main circuit topology is consist of cascoded two FET with resonating part. The circuit is designed as unstably nonlinear for limited frequency band. FET with drain shorted to source is used for frequency tuning element. Linear conversion gain of -18.83 ㏈ is achieved with 9mA and 4V consumption. Input 1㏈ compression point is more than 11㏈m. The chip area is 1.4$\times$1.4 mm.