• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.55-59
• /
• 1990

N-Channel polysilicon MOSFETs (W/L=20/1.5, 3, 5.10$\mu\textrm{m}$) were fabricated using RTP(Rapid Thermal Processor) and hydrogen passivation. The N+ Source, drain and gate were annealed and recrystallized using RTP at temperature of 1000$^{\circ}C$-1100$^{\circ}C$. But the active areas were now specially crystallized before growing the gate oxide. Without the hydrogen passivation, excellent transistor characteristics (ON/OFF=5${\times}$10$\^$6/, s=85mv/dec, I$\_$L/=51pA/$\mu\textrm{m}$) were obtained for 1.5$\mu\textrm{m}$ MOSFET. Also the transistor characteristics were improved by hydrogen passivation.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.584-592
• /
• 2003

6H-SiC MOSFETs and digital ICs have been fabricated and characterized. PMOS devices are fabricated on an n-type epilayer while the NMOS devices are fabricated on implanted p-wells. NMOS and PMOS devices use a thermally grown gate oxide. SiC MOSFETs are fabricated using different impurity activation methods such as high temperature and newly proposed laser annealing methods. Several digital circuits, such as resistive road NMOS inverters, CMOS inverters, resistive road NMOS NANDs and NORs are fabricated and characterized.

• Journal of Power Electronics
• /
• 제5권4호
• /
• pp.247-256
• /
• 2005

In order to harvest power in an efficient manner from a micro piezoelectric (PZT) device for charging the battery of a remote system, a new AC/DC resonant pulse power converter is proposed. The proposed power converter has two stages in the power conversion process. The first stage includes N-type MOSFET full bridge rectifier. The second stage includes a boost converter having an N-type MOSFET and a P-type MOSFET. MOSFETs work in the $1^{st}$ or $3^{rd}$ quadrant region. A small inductor for the boost converter is assigned in order to make the size of the power converter as small as possible, which makes the on-interval of the MOSFET switch of the boost converter ultimately short. Due to this short on-interval, the parasitic junction capacitances of MOSFETs affect the performance of the power converter system. In this paper, the performance of the new converter is analytically and experimentally evaluated with consideration of the parasitic capacitance of switching devices.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.843-847
• /
• 2014

In Super Junction (SJ) MOSFETs, charge balance is the most important issue of the SJ fabrication process. In order to achieve the best electrical characteristics, such as breakdown voltage and on-resistance, the N-type and P-type drift regions must be fully depleted when the drain bias approaches the breakdown voltage, which is known as the charge balance condition. In conventional charge balance analysis, based on multi-epi process SJ MOSFETs, analytical model has only N, P pillar width and doping concentration parameter. But applying a conventional charge balance principle to trench filling process, easier than Multi-epi process, is impossible due to the missing of the trench angle parameter. To achieve much more superior characteristics of on-resistance in trench filling SJ MOFET, the appropriate trench angle is necessary. So in this paper, modulated charge balance analysis is proposed, in which a trench angle parameter is added. The proposed method is validated using the TCAD simulation tool.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.7-8
• /
• 2007

We investigated the characteristics of UTB-SOI pMOSFETs with SOI thickness ($T_{SOI}$) ranging from 10 nm to 1 nm and evaluated the dependence of electrical characteristics on the silicon surface orientation. As a result, it is found that the subthreshold characteristics of (100)-surface UTB-SOI pMOSFETs were superior to (110)-surface. However, the hole mobility of (110)-surface were larger than that of (100)-surface. The enhancement of effective hole mobility at the effective field of 0.1 MV/ccm was observed from 3-nm to 5-nm SOI thickness range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.5-6
• /
• 2005

High performance SiGe heterostructure metal-oxide-semiconductor field effect transistors(MOSFETs) were fabricated using well-controlled delta-doping of boron and SiGe/Si heterostructure epitaxal layers grown by reduced pressure chemical vapor deposition. In this paper, we report 1/f noise characteristics of the SiGe MOSFETs measured under various bias conditions of the gate and drain voltages changing in linear operation regions. From the noise spectral density, we found that the gate and drain voltage dependence of the noise represented same features, as usually scaled with $f^1$. However, 1/f noise was found to be much lower in the device with boron delta-doped layer, by a factor of $10^{-1}\sim10^{-2}$ in comparion with the device fabricated without delta-doped layer. 1/f noise property of delta-doped device looks important because the device may replace bipolar transistors most commonly embedded in high-frequency oscillator circuits.

• 한국전기전자재료학회논문지
• /
• 제31권1호
• /
• pp.6-10
• /
• 2018

Ni germanide (NiGe) is a promising alloy material with small contact resistance at the source/drain (S/D) of Ge MOSFETs. However, it is necessary to reduce the specific contact resistance between NiGe and the doped Ge S/D region in high-performance MOSFETs. In this study, a novel method is proposed to reduce the specific contact resistance between NiGe and p-type Ge (p-Ge) using a Tb interlayer. The specific contact resistance between NiGe and p-Ge was successfully decreased with the introduction of the Tb interlayer. To investigate the mechanism behind the reduction in the specific contact resistance, the elemental distribution and crystalline structure of NiGe were analyzed using secondary ion mass spectroscopy and X-ray diffraction. It is likely that the reduction in specific contact resistance was caused by an increase in the concentration of boron in the space between NiGe and p-Ge due to the influence of the Tb interlayer.

• 한국정보통신학회논문지
• /
• 제13권2호
• /
• pp.348-354
• /
• 2009

본 논문은 p-MOS 트랜지스터에서 음 바이어스 온도 불안정(NBTI) 전류 스트레스 인가에 의해서 드레인 전류, 문턱 전압, 문턱 전압아래 기울기, 게이트유기 드레인 누설(GIDL) 전류가 변화하는 열화특성을 측정하고 분석하였다. 스트레스 시간, 온도와 전계 의존에 연관된 열화 크기는 실리콘/산화막 계면에서 계면 트랩 생성에 좌우된다는 것으로 나타났다. 문턱 전압의 변화와 문턱 전압아래 기울기 사이에 상관관계로부터, 소자 열화에 대한 중요한 메카니즘이 계면 상태의 생성과 관련이 있다는 것을 분석하였다. GIDL 측정 결과로부터, NBTI 스트레스에 기인한 계면상태에서 전자 정공쌍의 생성이 GIDL 전류의 증가를 가져온다. 그러므로 초박막 게이트 산화막 소자에서 NBTI 스트레스 후에 GIDL 전류 증가를 고려하여 야만 한다. 또한, 신뢰성 특성과 dc 소자 성능을 동시에 고려함이 초고집적 CMOSFET의 스트레스 공학기술에서 상당히 필수불가결하다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권3호
• /
• pp.240-250
• /
• 2010

Double Gate MOSFETs (DG MOSFETs) with doping in one or two thin layers of an otherwise intrinsic channel are simulated to obtain the transport characteristics, threshold voltage and leakage current. Two different device structures- one with doping on two layers near the top and bottom oxide layers and another with doping on a single layer at the centre- are simulated and the variation of device parameters with a change in doping concentration and doping layer thickness is studied. It is observed that an n-doped layer in the channel reduces the threshold voltage and increases the drive current, when compared with a device of undoped channel. The reduction in the threshold voltage and increase in the drain current are found to increase with the thickness and the level of doping of the layer. The leakage current is larger than that of an undoped channel, but less than that of a uniformly doped channel. For a channel with p-doped layer, the threshold voltage increases with the level of doping and the thickness of the layer, accompanied with a reduction in drain current. The devices with doped middle layers and doped gate layers show almost identical behavior, apart from the slight difference in the drive current. The doping level and the thickness of the layers can be used as a tool to adjust the threshold voltage of the device indicating the possibility of easy fabrication of ICs having FETs of different threshold voltages, and the rest of the channel, being intrinsic having high mobility, serves to maintain high drive current in comparison with a fully doped channel.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.263-267
• /
• 2014

Super junction trench gate power MOSFETs have been receiving attention in terms of the trade-off between breakdown voltage and on-resistance. The vertical structure of super junction trench gate power MOSFETs allows the on-resistance to be reduced compared with conventional Trench Gate Power MOSFETs. The heat release of devices is also decreased with the reduction of on-resistance. In this paper, Lattice Temperature of two devices, Trench Gate Power MOSFET and Super junction trench gate power MOSFET, are compared in several temperature circumstance with the same Breakdown Voltage and Cell-pitch. The devices were designed by 100V Breakdown voltage and measured from 250K Lattice Temperature. We have tried to investigate how much temperature rise in the same condition. According as temperature gap between top of devices and bottom of devices, Super junction trench gate power MOSFET has a tendency to generate lower heat release than Trench Gate Power MOSFET. This means that Super junction trench gate power MOSFET is superior for wide-temperature range operation. When trench etching process is applied for making P-pillar region, trench angle factor is also important component. Depending on trench angle, characteristics of Super junction device are changed. In this paper, we focus temperature characteristic as changing trench angle factor. Consequently, Trench angle factor don't have a great effect on temperature change.