JSTS:Journal of Semiconductor Technology and Science

The Institute of Electronics and Information Engineers (대한전자공학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of Lattice Temperature in Super Junction Trench Gate Power MOSFET as Changing Degree of Trench Etching

  • Received : 2013.08.25
  • Accepted : 2014.04.17
  • Published : 2014.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Super junction trench gate power MOSFETs have been receiving attention in terms of the trade-off between breakdown voltage and on-resistance. The vertical structure of super junction trench gate power MOSFETs allows the on-resistance to be reduced compared with conventional Trench Gate Power MOSFETs. The heat release of devices is also decreased with the reduction of on-resistance. In this paper, Lattice Temperature of two devices, Trench Gate Power MOSFET and Super junction trench gate power MOSFET, are compared in several temperature circumstance with the same Breakdown Voltage and Cell-pitch. The devices were designed by 100V Breakdown voltage and measured from 250K Lattice Temperature. We have tried to investigate how much temperature rise in the same condition. According as temperature gap between top of devices and bottom of devices, Super junction trench gate power MOSFET has a tendency to generate lower heat release than Trench Gate Power MOSFET. This means that Super junction trench gate power MOSFET is superior for wide-temperature range operation. When trench etching process is applied for making P-pillar region, trench angle factor is also important component. Depending on trench angle, characteristics of Super junction device are changed. In this paper, we focus temperature characteristic as changing trench angle factor. Consequently, Trench angle factor don't have a great effect on temperature change.

Keywords

References

  1. B. J. Baliga: Fundamentals of Power Semiconductor Devices, Springer, 2009
  2. H. W. Lee, et al, "Study on Design of 60V TDMOSFET for protection circuit Module," J.KIEEME, Vol. 25, No. 5, pp.340-344, 2012[3]
  3. S. Kyoung, et al, "A Novel Trench IGBT with a Deep P+ layer beneath the Trench Emitter,", IEEE Electron Device, Vol. 30, No. 1, pp.82-84
  4. Jong Min Geum, et al, "A study on the Electrical Characteristic of 600V super junction MOSFET," The Korean Institute of Electrical and Electronic Material Engineers(KIEEME), Vol. 25, No. 5, pp. 288, 2012
  5. Yu Seup Cho, et al, "Electrical Characteristic Improvement of power MOSFET with Single Floating Island Structure," The Korean Institute of Electrical and Electronic Material Engineers(KIEEME), Vol. 25, No. 1, pp. 284, 2012
  6. S. Iwamoto, et al, "Above 500V Class Superjunction MOSFETs fabricated by deep trench etching and epitaxial growth," ISPSD'05. the 17th International Symposium, pp.31-3
  7. Fujihira, T, et al, "Simulated superior performances of semiconductor superjunction devices," Proc. of the ISPSD'98, Kyoto,1998,pp.423-426
  8. H. Ninomiya, Y.Miura and K Kobayashi, "Ultralow On-resistance 60-100 V Superjunction UMOSFETs Fabricated by multiple Ion- Implantation," Proc. ISPSD, pp.177-180,2004
  9. Pravin N. Kondekar, et al, "Static Off state and Conduction State Charge Imbalance in the Superjunction Power MOSFET," TENCON Vol.4(2003),pp.1455-1458
  10. T.Minato, T.Nitta, A.Uenisi, M.Yanao, M.Harada and S.Hine, "Which is cooler, Trench or Multi- Epitaxy," The Korean Institute of Electrical and Electronic Material Engineers(KIEEME), Proc. ISPSD2000(2000), pp73.

Cited by

  1. Anomaly Detection and Degradation Prediction of MOSFET vol.2015, pp.1563-5147, 2015, https://doi.org/10.1155/2015/573980
  2. A Study of Super Junction Trench Gate IGBT with Fully Self-Aligned Fabrication Technology vol.62, pp.4, 2016, https://doi.org/10.1080/03772063.2015.1086702