• 전기의세계
• /
• v.30 no.10
• /
• pp.645-654
• /
• 1981

A technique has been proposed for fabricating a submicron channel vertical V-groove JFET using standard photolithography. A finite element numerical simulation of the V-groove JFET operation was performed using a FORTRAN progrma run on a Cyber-174 computer. The numerical simulation predicts pentode like common source output characteristics for the p$^{+}$n Vertical V-groove JFET with maximum transconductance representing approximately 6 precent of the zero bias drain conductance value and markedly high drain conductance at large drain voltages. An increase in the acceptor concentration of the V-groove JFET gate was observed to cause a significant increase in the transconductance of the device. Therefore, as above mentioned, this paper is study on the analysis of a Vertical V-groove Junction Field Effect Transistor with Finite Element Method.d.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.192-198
• /
• 2017

In this paper, we propose a novel double gate vertical channel tunneling field effect transistor (DVTFET) with a dielectric sidewall and optimization characteristics. The dielectric sidewall is applied to the gate region to reduced ambipolar voltage ($V_{amb}$) and double gate structure is applied to improve on-current ($I_{ON}$) and subthreshold swing (SS). We discussed the fin width ($W_S$), body doping concentration, sidewall width ($W_{side}$), drain and gate underlap distance ($X_d$), source doping distance ($X_S$) and pocket doping length ($X_P$) of DVTFET. Each of device performance is investigated with various device parameter variations. To maximize device performance, we apply the optimum values obtained in the above discussion of a optimization simulation. The optimum results are steep SS of 32.6 mV/dec, high $I_{ON}$ of $1.2{\times}10^{-3}A/{\mu}m$ and low $V_{amb}$ of -2.0 V.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.13-20
• /
• 2003

The model of the transistor saturation current of the BJT for integrated circuits based upon the semiconductor physics is proposed. The method for calculating the doping profile in the base region using process conditions is presented and the method for calculating the base Gummel number of lateral PNP BJT and vertical NPN BJT is proposed. The transistor saturation currents of NPN BJT using 20V and 30V process conditions obtained from the proposed method show an average relative error of 6.7% compared with the measured data and the transistor saturation currents of PNP BJT show an average relative error of 6.0% compared with the measured data.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.172-178
• /
• 2016

In this paper, we propose a sub-10 nm Ge/GaAs heterojunction-based tunneling field-effect transistor (TFET) with vertical band-to-band tunneling (BBT) operation for ultra-low-power (LP) applications. We design a stack structure that is based on the Ge/GaAs heterojunction to realize the vertical BBT operation. The use of vertical BBT operations in devices results in excellent subthreshold characteristics with a reduction in the drain-induced barrier thinning (DIBT) phenomenon. The proposed device with a channel length ($L_{ch}$) of 5 nm exhibits outstanding LP performance with a subthreshold swing (S) of 29.1 mV/dec and an off-state current ($I_{off}$) of $1.12{\times}10^{-11}A/{\mu}m$. In addition, the use of the highk spacer dielectric $HfO_2$ improves the on-state current ($I_{on}$) with an intrinsic delay time (${\tau}$) because of a higher fringing field. We demonstrate a sub-10 nm LP switching device that realizes a good S and lower $I_{off}$ at a lower supply voltage ($V_{DD}$) of 0.2 V.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.351-354
• /
• 2004

This thesis presents Bipolar transistor with SAVEN(Self-Aligned VErtical Nitride) structure as a high-speed device which is essential for high-speed system such as optical storage system or mobile communication system, and proposes 0.8${\mu}m$ BiCMOS Process which integrates LDD nMOS, LDD pMOS and SAVEN bipolar transistor into one-chip. The SPICE parameters of LDD nMOS, LDD pMOS and SAVEN Bipolar transistor are extracted, and comparator operating at 500MHz sampling frequency is designed with them. The small Parasitic capacitances of SAVEN bipolar transistor have a direct effect on decreasing recovery time and regeneration time, which is helpful to improve the speed of the comparator. Therefore the SAVEN bipolar transistor with high cutoff frequency is expected to be used in high-speed system.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.1 s.14
• /
• pp.17-20
• /
• 2006

This paper presents of a new type of memory cell that could potentially replace both DRAM and flash memory. The proposed device cell operates by sensing the state of about 1,000 electrons trapped between unique insulating barriers in the channel region of the upper transistor. These electrons are controlled by a side gate on the transistor, and their state in turn controls the gate of the larger transistor, providing signal gain within the memory cell. It becomes faster and more reliable memory with lower operation voltage. Moreover, the use of a multiple tunnel junction (MTJ) fur the vertical transistor can significantly improve the data retention and operation speed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.12
• /
• pp.977-982
• /
• 2000

Conventional transistors which have vertical structure show increased parasitic capacitance characteristics in accordance with the increase of non-active base area and collector area. These consequently have disadvantage for high speed switching performance. In this paper, a lateral structure transistor which has minimized parasitic capacitance by using SDB(Silicon Direct Bonding) wafer and oxide sidewall isolation utilizing silicon trench technology is presented. Its structural characteristics are designed by ATHENA(SUPREM4), the process simulator from SILVACO International, and its performance is proven by ATLAS, the device simulator from SILVACO International. The performance of the proposed lateral structure transistor is certified through the V$\_$CE/-I$\_$C/ characteristics curve, h$\_$FE/-I$\_$C/ characteristics, and GP-plot. Cutoff Frequency is 13.7㎓.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.544-550
• /
• 2017

This simulation based study reports a novel tunable, compact, room temperature terahertz (THz) transistor source, operated on the concept of charge plasma oscillation with the capability of radiating within a terahertz gap. A vertical cavity with a quasi-periodic distributed-Bragg-reflector has been attached to a THz plasma wave transistor to achieve a monochromatic coherent surface emission for single as well as multi-color operation. The resonance frequency has been tuned from 0.5 to 1.5 THz with the variable quality factor of the optical cavity from 5 to 290 and slope efficiency maximized to 11. The proposed surface emitting terahertz transistor is able to satisfy the demand for compact solid state terahertz sources in the field of teratronics. The proposed device can be integrated with Si CMOS technology and has opened the way towards the development of silicon photonics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.759-762
• /
• 2000

Present transistors which have vertical structure show increased parasitic capacitance characteristics in accordance with the increase of non-active base area and collector area, consequently have disadvantage for high speed switching performance. In this paper, a horizontal structure transistor which has minimized parasitic capacitance in virtue of SDB(Silicon Direct Bonding) wafer and oxide sidewall isolation utilizing silicon trench technology is presented. Its structural characteristics were designed by ATHENA(SUPREM4), the process simulator from SILVACO International, and its performance was proven by ATLAS, the device simulator from SILVACO International. The performance of the proposed horizontal structure transistor was certified through the VCE-lC characteristics curve, $h_{FE}$ -IC characteristics, and GP-plot.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.1-8
• /
• 2005

In this paper, we analyzed the DC and RF characteristics of $0.1\;{\mu}m$ metamorphic high electron mobility transistor (MHEMT) using the ISE-TCAD simulation tool. we also analyzed the effects or the scaling on vertical and lateral dimensions such as a gate length, source-drain spacing, and channel thickness. We discussed the degradation of extrinsic transconductance $g_{m,max}$ in the MHEMTs adopting the gate length $(L_g)$ of $sub-0.1\;{\mu}m$. We suggested the model describing the effects on the vertical and lateral parameter scaling.