• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.163-165
• /
• 2000

We investigated visible light radiated from Plasma Focus device by time-integrated analyzed method. Plasma focus is a device that translated from electric energy into visible light by electric discharge. Spectral analysis is using Monochromator(focal length = 0.5 m). Time-integrated spectrum is analyzed with densitometer the film which developed a constant range of wavelength. The condition of visible emission was that the discharging voltage was 13 kV and the working gas were Argon and Helium.

• Honam Mathematical Journal
• /
• v.1 no.1
• /
• pp.1-9
• /
• 1979

Positive Local Coordmate($(x^1,x^2,{\cdots}x^n)$)을 갖는 Oriented Manifold M을 생각한다. M이 Compact Carrier를 갖는 경우, M위의 n차(次) Differential Form ${\phi}^{(n)}$의 적분(積分)을 $${\int}{\phi}^{(n)}=\sum_{\alpha}{\int}_{-{\infty}}^{\infty}{\cdots}{\int}_{-{\infty}}^{\infty}f_{\alpha}{\phi}^{(n)}dx^1{\cdots}dx^n$$로 정의(定義)하며 (정의(定義) 7), M위의 p 차(次)의 Differential form $\beta^{(p)}$와 Differential simplex $S^{(p)}=(S^{(p)},\;{\pi},\;{\varepsilon})$에 대하여 $S^{(p)}$위의 $\beta^{(p)}$의 적분(積分)을 $${\int}_{^{(p)}S}{\beta}^{(p)}={\int}_{S^{(p)}}{\varepsilon}{\pi}^*{\beta}^{(p)}={\int}_{E^p}f{\cdot}{\varepsilon}{\cdot}{\pi}^*{\beta}^{(p)}$$로 정의(定義)한다 (정의(定義) 9). 단(但) $\bar{S}^{(p)}$는 $S^{(p)}=(p_0{\cdot}p_1{\cdots}p_p)$에 의(依)하여 Spanning 되는 $E^p$의 Subspace이고 f는 $\bar{S}^{(p)}$의 특성함수(特性函數)이다. 이때 (n-1)차(次)의 Differential Form ${\beta}^{(n-1)}$이 Compart인 Carrier를 가지면 ${\int}d{\beta}^{(n-1)}=0$이 됨을 고찰(考察)하며(정리(定理 8), (p-1)차(次) Differential Form ${\beta}^{(p-1)$과 p차(次) Differential Chain $C^{(p)}$에 관(關)하여 $${\int}_{C^{(p)}}d{\beta}^{(p-1)}={\int}_{{\partial}C^{(p)}}{\beta}^{(p-1)}$$이 성립(成立)함을 구명(究明)하려 한다(정리(定理) 10).

• Computational Structural Engineering
• /
• v.7 no.3
• /
• pp.167-176
• /
• 1994

A local remeshing algorithm using Delaunay property is developed for the analysis on the phenomenon of quasi-static crack propagation, which is a typical problem of accompanying constantly varying geometry. The algorithm performs both remeshing and refinement. The use of M-integral is demonstrated to simulate crack propagation under mixed mode with the edge spalling problem.

• Journal of the Korean earth science society
• /
• v.43 no.6
• /
• pp.691-711
• /
• 2022

The state-of-the-art Earth system model as a virtual Earth is required for studies of current and future climate change or climate crises. This complex numerical model can account for almost all human activities and natural phenomena affecting the atmosphere of Earth. The Unified Model (UM) from the United Kingdom Meteorological Office (UK Met Office) is among the best Earth system models as a scientific tool for studying the atmosphere. However, owing to the expansive numerical integration cost and substantial output size required to maintain the UM, individual research groups have had to rely only on supercomputers. The limitations of computer resources, especially the computer environment being blocked from outside network connections, reduce the efficiency and effectiveness of conducting research using the model, as well as improving the component codes. Therefore, this study has presented detailed guidance for installing a new version of the UM on high-performance parallel computers (Linux clusters) owned by individual researchers, which would help researchers to easily work with the UM. The numerical integration performance of the UM on Linux clusters was also evaluated for two different model resolutions, namely N96L85 (1.875° ×1.25° with 85 vertical levels up to 85 km) and N48L70 (3.75° ×2.5° with 70 vertical levels up to 80 km). The one-month integration times using 256 cores for the AMIP and CMIP simulations of N96L85 resolution were 169 and 205 min, respectively. The one-month integration time for an N48L70 AMIP run using 252 cores was 33 min. Simulated results on 2-m surface temperature and precipitation intensity were compared with ERA5 re-analysis data. The spatial distributions of the simulated results were qualitatively compared to those of ERA5 in terms of spatial distribution, despite the quantitative differences caused by different resolutions and atmosphere-ocean coupling. In conclusion, this study has confirmed that UM can be successfully installed and used in high-performance Linux clusters.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1025-1030
• /
• 2018

The proposed modulator is designed by utilizing a conventional structure employing time division technique to realize the 4th order delta-sigma modulator using one op-amp. In order to reduce the influence of KT/C noise, the capacitance in the first and second integrators reused was chosen to be 20pF and capacitance of third and fourth integrators was designed to be 1pF. The stage variable technique in the low power reconfigurable op-amp was used to solve the stability issue due to different capacitance loads for the reduction of KT/C noise. This technique enabled the proposed modulator to reduce the power consumption of 15% with respect to the conventional one. The proposed modulator was fabricated with 0.18um CMOS N-well 1 poly 6 metal process and consumes 305uW at supply voltage of 1.8V. The measurement results demonstrated that SNDR, ENOB, DR, FoM(Walden), and FoM(Schreier) were 66.3 dB, 10.6 bits, 83 dB, 98 pJ/step, and 142.8 dB at the sampling frequency of 256kHz, oversampling ratio of 128, clock frequency of 1.024 MHz, and input frequency of 250 Hz, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.202-209
• /
• 1998

A three-dimensional numerical method based on the Green's integral equation is developed to predict the motion response and drift force in waves for the ocean monitoring facilities. In this method, we use source and doublet distribution, and triangular and rectangular eliments. To eliminate the irregular frequency phenomenon, the method of improved integral equation is applied and the time-mean drift force is calculated by the method of direct pressure integration over the body surface. To conform the validity of the present numerical method, some calculations for the floating sphere are performed and it is shown that the present method provides sufficiently reliable results. As a calculation example for the real facilities, the motion response and the drift force of the vertical cylinder type ocean monitoring buoy with 2.6 m diameter and 3,77 m draft are calculated and discussed. The obtained results of motion response can be used to determine the shape and dimension of the buoy to reduce the motion response, and other data such as the effect of motion reduction due to a damper can be predictable through these motion calculations. Also, the calculation results of drift force can be used in the design procedure of mooring system to predict the maximum wave load acting on the mooring system. The present method has, in principle, no restriction in the application to the arbitrary shape facilities. So, this method can be a robust tool for the design, installation, and operation of various kinds of the floating-type ocean monitoring facilities.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.36-41
• /
• 2005

The aerodynamic characteristics of the oscillating airfoil(NACA0012) were measured by experimental methods by using the airfoil oscillating test rig installed at KARI 1m wind tunnel. The chord of the airfoil is 0.2m and the span is 0.75m. The lift and pitching moments were calculated by integrating the surface pressure measured by strain-gage type pressure sensors. The test condition is like this : the reduced oscillating frequency(k) < 0.1, Re ~ 820,000, Mach < 0.25. The test results were compared with the reference data published by other facilities.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.04a
• /
• pp.35-42
• /
• 1997

The two-state or mutual M-integral which is derived from tile M-integral and is applicable for two elastic states, is applied for computing all intensity of a singular near-tip field around the vertex of a class of wedge, encountered in adhesive lap joints under mechanical loading. Numerically we verify that a simple auxiliary field associated with every eigenfunction for the composite wedge under consideration exists in the form of the conjugate solution in the sense of tile M-integral. The auxiliary field is then employed for superposition with the elastic field under consideration, and the associated two-state M-integral is computed via the domain integral technique. This enables us to extract the intensity for a singular field information for a singular elastic boundary layer is extracted form the domain integral representation without resort to singular finite element for the wedge vertex.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7189-7195
• /
• 2015

The method of moments (MoM) is implemented to simulate scattering from a PEC (perfectly electric conductor) cylinder in the TE(transversw electric) EFIE (Electric Field Integral Equation) approach. The procedure expresses the singularity integral and the hypersingularity integral in terms of an analytic function and employs a singularity isolation process coupled with numerical technique along the discretized segment to evaluate the self terms. It is known that, in the MoM technique, the choice of base functions and test functions is very important for the accuracy and convergence of the numerical analysis. Thus, in this paper, three conditions, obtained from the combination of basis functions and test functions, are adopted to get the induced currents on the PEC surface. These currents are compared to the analytical one in the relative rms current error to get the condition that shows fast convergence rate. The fast order of convergence of the current error, 2.528, is obtained under the combination of pulse basis function/delta test function.

• The KIPS Transactions:PartB
• /
• v.13B no.1 s.104
• /
• pp.15-20
• /
• 2006

This paper describes research on intelligent game character through performance enhancements of physics engine in computer games. The algorithm that recognizes the physics situation uses momentum back-propagation neural networks. Also, we present an experiment and its results, integration methods that display optimum performance based on the physics situation. In this experiment on integration methods, the Euler method was shown to produce the best results in terms of fps in a simulation environment with collision detection. Simulation with collision detection was shown similar fps for all three methods and the Runge-kutta method was shown the greatest accuracy. In the experiment on physics situation recognition, a physics situation recognition algorithm where the number of input layers (number of physical parameters) and output layers (destruction value for the master car) is fixed has shown the best performance when the number of hidden layers is 3 and the learning count number is 30,000. Since we tested with rigid bodies only, we are currently studying efficient physics situation recognition for soft body objects.