• Clean Technology
• /
• v.27 no.1
• /
• pp.47-54
• /
• 2021

The adsorption of Acid Fuchsin (AF) on granular activated carbon (GAC) was investigated for isothermal adsorption and kinetics and thermodynamic parameters by experimenting with the initial concentration, contact time, temperature, and pH of the dye as adsorption parameters. In the pH effect experiment, the adsorption of AF on activated carbon showed a bathtub type with increased adsorption at pH 3 and 11. The adsorption equilibrium data of AF fit well with the Freundlich isotherm model, and the calculated separation factor (1/n) value was found in which activated carbon can effectively remove AF. The pseudo-second-order kinetic model fits well within 7.88% of the error percent in the adsorption process. According to Weber and Morris's model plot, it was divided into two straight lines. The intraparticle diffusion rate was slow because the stage 2 (intraparticle diffusion) slope was smaller than that of stage 1 (boundary layer diffusion). Therefore, it was confirmed that the intraparticle diffusion was a rate-controlling step. The activation energy of AF (13.00 kJ mol-1) corresponded to the physical adsorption process (5 - 40 kJ mol-1). The free energy change of the AF adsorption by activated carbon showed negative values at 298-318 K. As the spontaneity increased with increasing temperature. The adsorption of AF was an endothermic reaction (ΔH = 22.65 kJ mol-1).

• Journal of Food Hygiene and Safety
• /
• v.35 no.6
• /
• pp.552-560
• /
• 2020

Listeria monocytogenes is a highly pathogenic gram-positive bacterium that is easily isolated from cheese, meat, processed meat products, and smoked salmon. A zero-tolerance (n=5, c=0, m=0/25 g) criteria has been applied for L. monocytogenes in cheese meaning that L. monocytogenes must not be detected in any 25 g of samples. However, there was a lack of scientific information behind this criteria. Therefore, in this study, we conducted a risk assessment based on literature reviews to provide scientific information supporting the baseline and to raise public awareness of L. monocytogenes foodborne illness. Quantitative risk assessment of L. monocytogenes for cheese was conducted using the following steps: exposure assessment, hazard characterization, and risk characterization. As a result, the initial contamination level of L. monocytogenes was -4.0 Log CFU/g in cheese. The consumption frequency of cheese was 11.8%, and the appropriate probability distribution for amount of cheese consumed was a Lognormal distribution with an average of 32.5 g. In conclusion, the mean of probabilities of foodborne illness caused by the consumption of cheese was 5.09×10-7 in the healthy population and 4.32×10-6 in the susceptible population. Consumption frequency has the biggest effect on the probability of foodborne illness, but storage and transportation times have also been found to affect the probability of foodborne illness; thus, management of the distribution environment should be considered important. Through this risk assessment, scientific data to support the criteria for L. monocytogenes in cheese could be obtained. In addition, we recommend that further risk assessment studies of L. monocytogenes in various foods be conducted in the future.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.11-19
• /
• 2021

The aim of the research is providing a fundamental data on quality and constructability of direct tile setting method depending on various cement to sand ratio for tiling dry cement mortar. A large number of tile setting failures reported is related with the cement mortar and its construction for tiling. Because of different materials of tiles, the properties of tiling dry cement mortar, an adhesive for tiling, can influence on quality and constructability of tiling differently. Practically, the easiest way of controlling the properties of the tiling dry cement mortar is to control the proportion of cement and sand. Hence, in this research, sand to cement ratio (S/C) was controlled. Since there is no standarized method on evaluating performance of dry cement mortar for tiling, a several sensory evaluation methods were suggested and executed. According to the experiments conducted in this research, the adhesive performance of cement mortar for tiles can be different depending on the sides such as tile and substrate. Additionally, depending on S/C, finishability, initial adhesive performance, and tile shifting resistance can be changed for ceramic tile. Therefore, under the conditions of this research, about 5 of S/C can be recommended for appropriate performace of tiling dry cement mortar.

• The Journal of Korean Academy of Sensory Integration
• /
• v.19 no.1
• /
• pp.1-12
• /
• 2021

Objective : The purpose of this study was to investigate the effects of paired-group sensory integration therapy on sensory processing, peer interaction, and play development of four-year-old children. Methods : This study involved 13 weekly sessions of a four-minute intervention as well as an initial 10 minutes of parental counseling for those without experience of paired-group sensory integration therapy. The intervention consisted of sensory processing activities and various occupational activities, and the children's Short Sensory Profile (SSP), Penn Interactive Peer Play Scale (PIPPS), and Knox Preschool Play Scale-Revised (KPPS-R) were measured before and after the sessions for comparison. The results are presented using visualized data. Results : After the paired-group interventions, all subjects showed improved sensory processing ability according to their SSP scores and improved play development on the KPPS-R. Moreover, the frequency of negative interactions decreased in the PIPPS measure. Conclusion : This paired-group sensory integration therapy had a positive effect on sensory processing, peer interaction, and play for children with developmental delay. In the future, research that applies this kind of paired-group intervention in various age groups would be useful.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.561-580
• /
• 2021

This study analyses the historical and cultural streets at Pinggang Road in the city of Suzhou, by understanding the development and conservation of the area, and uses the following ways to investigate its development, re-organization, and current state. This paper comprehensively compares, collates and investigates 4 different historical and cultural areas in Insadong and Samcheong-dong in South Korea, and South Luogu Lane in China. From initial research and analysis, this paper gathers the cultural, economic, and societal perspectives as non-physical measures, and spatial structure, road structure, and building maintenance as physical factor framework. It is significant in that it can provide an evaluation model for the preservation and regeneration of historical and cultural streets by presenting the viewpoint of complex development of non-physical and physical elements in Pyeonggang-ro. In addition, it is necessary to conduct optimization and specific research on insufficient areas, such as maintenance and development of programs and signature systems for visitors, and continuous development of historical and cultural network platforms by combining on-site surveys. Basic data should be provided for reference on the street.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.695-706
• /
• 2021

The purpose of this study was to establish entrepreneurship(risk taking, proactiveness, innovativeness), entrepreneurial self-efficacy, and entrepreneurial intention as a structural equation model to confirm the entrepreneurial intention of university students. In order to achieve the purpose of this study, 449 students from 3 university students in Gyeonggi-do were studied, and data analysis was conducted with SPSS 23.0 and AMOS 23.0 statistical programs. The results of the empirical analysis are as follows: First, Among university students' entrepreneurship, proactiveness was not statistically significant to entrepreneurial intention but, risk taking and innovativeness have been identified as having a direct impact. Second, University students' entrepreneurial self-efficacy directly affects entrepreneurial intention. Third, risk taking and innovativeness were statistically significant, but proactiveness was not affected. Finally, through the mediating of entrepreneurial self-efficacy, risk taking effects were fully sold to entrepreneurial intention, and innovativeness was partially sold to entrepreneurial intention. Based on the results of this study, the way to enhance university students' entrepreneurial intention is to develop programs that can improve their entrepreneurial self-efficacy and apply them actively to university education. In particular, university students need mentoring support from on-site entrepreneurial experts and internship education support to increase risk taking and innovativeness as prospective founders. The government can lead to entrepreneurial behavior when economic and institutional support precedes university students to recover from their initial entrepreneur.

• Economic and Environmental Geology
• /
• v.55 no.2
• /
• pp.171-181
• /
• 2022

The Geochang Au-Ag deposit is located within the Yeongnam Massif. Within the area a number of hydrothermal quartz and calcite veins were formed by narrow open-space filling of parallel and subparallel fractures in the granitic gneiss and/or gneissic granite. Mineral paragenesis can be divided into two stages (stage I, ore-bearing quartz vein; stage II, barren calcite vein) by major tectonic fracturing. Stage I, at which the precipitation of major ore minerals occurred, is further divided into three substages (early, middle and late) with paragenetic time based on minor fractures and discernible mineral assemblages: early, marked by deposition of pyrite with minor pyrrhotite and arsenopyrite; middle, characterized by introduction of electrum and base-metal sulfides with minor sulfosalts; late, marked by hematite with base-metal sulfides. Fluid inclusion data show that stage I ore mineralization was deposited between initial high temperatures (≥380℃ ) and later lower temperatures (≤210℃ ) from H₂O-CO₂-NaCl fluids with salinities between 7.0 to 0.7 equiv. wt. % NaCl of Geochang hydrothermal system. The relationship between salinity and homogenization temperature indicates a complex history of boiling, fluid unmixing (CO₂ effervescence), cooling and dilution via influx of cooler, more dilute meteoric waters over the temperature range ≥380℃ to ≤210℃. Changes in stage I vein mineralogy reflect decreasing temperature and fugacity of sulfur by evolution of the Geochang hydrothermal system with increasing paragenetic time. The Geochang deposit may represents a mesothermal gold-silver deposit.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.753-765
• /
• 2021

The Dongwon Au-Ag deposit is located within the Paleozoic Taebaeksan province, Okcheon belt. Mineral paragenesis can be divided into two stages (stage I, ore-bearing quartz veins; stage II, barren carbonate veins) by major tectonic fracturing. Stage I, at which the precipitation of major ore minerals occurred, is further divided into three substages(early, middle and late) with paragenetic time based on minor fractures and discernible mineral assemblages: early, marked by deposition of pyrite with minor magnetite, pyrrhotite and arsenopyrite; middle, characterized by introduction of electrum and base-metal sulfides with minor sulfosalts; late, marked by argentite, Cu-As (and/or Sb) and Ag-Sb sulfosalts with base-metal sulfides. Fluid inclusion data show that stage I ore mineralization was deposited between initial high temperatures (≥430℃) and later lower temperatures (≤230℃) from fluids with salinities between 6.0 to 0.4 wt. percent equiv. NaCl. The relationship of salinity and homogenization temperature suggest that ore mineralization at Dongwon was deposited mainly due to fluid boiling, cooling and dilution via influx of cooler, more dilute meteoric waters. Changes in stage I vein mineralogy reflect decreasing temperature and fugacity of sulfur by evolution of the Dongwon hydrothermal system with increasing paragenetic time. The Dongwon deposit may represents a Korean-type and/or Au-Ag type mesothermal/epithermal gold-silver deposit.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.3
• /
• pp.141-148
• /
• 2022

In this study, the structural behavior of reinforced concrete members under simultaneous axial and blast loads was analyzed. Nonlinear dynamic analysis verification was performed using the experimental data of panels under fundamental blast load as well as those of reinforced concrete columns subjected to axial and blast loads. Because Autodyn is a program designed only for dynamic analysis, an analysis process is devised to simulate the initial stress state of members under static loads, such as axial loads. A total of 80 nonlinear dynamic finite element analysis procedures were conducted by selecting parameters corresponding to axial load ratios and scaled distances ranging 0%~70% and 1.1~2.0 (depending on the equivalent of TNT), respectively. The structural behavior was compared and analyzed with the corresponding degree of damage and maximum lateral displacement through the changes in axial load ratio and scaled distance. The results show that the maximum lateral displacement decreases due to the increase in column stiffness under axial loads. In view of the foregoing, the formulated analysis process is anticipated to be used in developing blast-resistant design models where structural behavior can be classified into three areas considering axial load ratios of 10%~30%, 30%~50%, and more than 50%.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.197-210
• /
• 2022

Entomopathogenic fungi can be used to control a variety of sucking and chewing insects, with little effect on beneficial insects and natural enemies. Approximately 170 entomopathogenic fungal insecticides have been registered and used worldwide, with the recent focus being on the mode of action and mechanism of insect-fungal interactions. During the initial period of research and development, the industrialization of entomopathogenic fungi focused on the selection of strains with high virulence. However, improvement in productivity, including securing resistance to environmental stressors, is a major issue that needs to be solved. Although conidia are the primary application propagules, efforts are being made to overcome the limitations of blastospores to improve the economic feasibility of the production procedure. Fungal transformation is also being conducted to enhance insecticidal activity, and molecular biology is being used to investigate functions of various genes. In the fungi-based pest management market, global companies are setting up cooperative platforms with specialized biological companies in the form of M&As or partnerships with the aim of implementing a tank-mix strategy by combining chemical pesticides and entomopathogenic fungi. In this regard, understanding insect ecology in the field helps in providing more effective fungal applications in pest management, which can be used complementary to chemicals. In the future, when fungal applications are combined with digital farming technology, above-ground applications to control leaf-dwelling pests will be more effective. Therefore, for practical industrialization, it is necessary to secure clear research data on intellectual property rights.