• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.58-66
• /
• 2001

GPC has been reported as a useful self-tuning control algorithm for systems with unknown time-delay and parameters. GPC is easy to understand and implement, and thus has won popularity among many practicing engineers. Despite its success, GPC does not guarantee is nominal stability. So, in this paper, GPC is rederived in frequency domain instead of in the time domain to guarantee its nominal stability. Derivation of GPC in frequency domain involves spectral factorization and Diophantine equation. Frequency domain GPC control law is stable because the zeros of characteristic polynomial are strictly Schur. Recursive least square algorithm is used to identify unknown parameters. To see the effectiveness of the proposed controller, the controller is simulated for a numerical problem that changes in dead-time, in order and in parameters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.634-637
• /
• 2005

A subjective index of sound quality when it hit him is required since human listening is very sensitive and complex. Sound quality evaluation it leads consequently rightly in each situation and it composes a sound quality factor. But one of the levels in interest frequency range is substitute we cannot see the tendency of frequency substitute at whole that is executes a clear voice evaluation. Design of experiment is used and dividing 12 equally in frequency domain, the sound quality using sharpness and annoyance is performed by modifying each of frequency domains. Design of experiment method reduces much number experiment very effectively and each main effect of domain solution analysis, such as a case of sharpness and annoyance, the change of domain (increase and decrease of sound pressure level, or change nil) can grasp a type of effect should have influenced to a sound quality, and it will be able to select the objective frequency domain which hits to the sound quality. Through these obtained results the physical changes of level at arbitrary frequency domain sensitivity can be adapted.

• Journal of electromagnetic engineering and science
• /
• 제17권4호
• /
• pp.208-220
• /
• 2017

This paper proposes an experimental optimization method for a wireless power transfer (WPT) system. The power transfer characteristics of a WPT system with arbitrary loads and various types of coupling and compensation networks can be extracted by frequency domain measurements. The various performance parameters of the WPT system, such as input real/imaginary/apparent power, power factor, efficiency, output power and voltage gain, can be accurately extracted in a frequency domain by a single passive measurement. Subsequently, the design parameters can be efficiently tuned by separating the overall design steps into two parts. The extracted performance parameters of the WPT system were validated with time-domain experiments.

• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.676-682
• /
• 1999

A study which develops a controller design methodology that has flexibility of eigenstructure assignment within the stability-robustness contraints of LQR is requried and has been performed. The previously developd control design methodology, namely, EALQR(Eigenstructure Assignment/LQR) has better performance than that of conventional LQR or eigenstructure assignment but has a constraint for the weitgting matrix in LQR, which could be indefinite for high-order system. In this paper, the effects of the indefinite Q in EALQR on the frequency domain properties are analyzed. The robustness criterion and quantitative frequency domain properties are also resented. Finally, the frequency domain properties of EALQR has been analyzed by applying to a flight control system design example.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.760-765
• /
• 1993

A multivariable learning control is designed in frequency domain. A general to of feedback assisted learning scheme is considered and an inverse model based learning algorithm is derived through convergence analysis in frequency domain. Performance of the proposed control method is evaluated through numerical simulation.

• 한국항행학회논문지
• /
• 제7권1호
• /
• pp.38-50
• /
• 2003

본 논문에서는 도선상에서 발생하는 결함 위치와 이상 유무를 감지하는 새로운 고분해능 반사측정법인 시간-주파수 영역반사측정법 (TFDR, Time-Frequency Domain Reflectometry)을 제안하였다. 고전적인 반사측정법들은 단지 시간 또는 주파수의 한 영역에서 분석되어져 왔으나, 본 논문에서 제시한 TFDR은 도선의 결함 위치와 이상 유무를 발견하기 위해 과도신호의 시간과 주파수 영역의 정보를 동시에 이용할 수 있는 시간-주파수 분석기법으로 특성화하였다. TFDR의 기준신호 설계는 측정 케이블의 물리적 성질들을 고려하여 주파수 밴드를 결정하며, 도선의 결함감지와 추정은 시간-주파수 상호상관관계 함수에 의해 이루어진다. TFDR 시스템을 이용하여 여러 결함 상태를 가진 실제 coaxial cable (RG-142, RG-400)에 대해 실험하였고 정확성을 입증하기 위해 TDR (Time Domain Reflectometry) 장비와 성능을 비교하였다. 본 논문에서는 TFDR이 TDR보다 작은 오차로 결함을 찾아냄을 나타내고 있으며, 측정된 정확도는 TFDR의 오차율이 0.5% 이하로 TDR (54750A/54754A) 장비보다 성능이 월등히 우수하다는 것을 알 수 있다.

• 한국통신학회논문지
• /
• 제32권2A호
• /
• pp.169-178
• /
• 2007

본 논문에서는 SC-FDE(Single Carrier with Frequency Domain Equalization) 시스템의 수신 성능을 최적화하기 위한 신호 구조와 수신기 설계 방안을 제안한다. 기존의 SC-FDE 시스템은 수신단에서 신호 복조를 위해 이용되는 파일럿 신호가 시간 영역에서 생성되기 때문에 주파수 영역 전력 분포가 불균일하여 채널 등화 과정에서의 오류를 발생시키며, 이는 수신기 성능 열화의 주요인으로 작용한다. 본 논문에서는 기존 방식의 단점을 보완하기 위해 시간과 주파수 영역 모두에서 전력 분포가 일정한 CAZAC(Constant Amplitude Zero Auto-Correlation) sequence를 응용하여 이를 반복하는 형태로 파일럿 신호를 생성함으로써 수신 성능을 향상시킬 수 있는 신호 구조를 설계하였으며, 이에 적합한 수신기 구조를 제시한다. 컴퓨터 시뮬레이션을 통해 이동 무선 채널 환경에서 제안된 구조가 기존의 구조에 비해 프레임과 주파수 동기 그리고 채널 등화의 관점에서 더욱 우수한 성능을 보임을 입증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.165-168
• /
• 1996

In this paper, we propose a design method of PID adaptive controller based on frequency domain analysis. The method is based on the estimation of a nonparametric process model in the frequency domain and the determination of the PID controller parameters by achieving partial model matching so as to minimize a performance function concerning to relative model error between the loop transfer function of the control system and the desired system. In the design method the process is represented only by a discrete set of points on the Nyquist curve of the process. Therefore it is not necessary to estimate a full order parameterized process model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.959-961
• /
• 1998

In this paper, we present design rule of high-voltage rectangular generator working in wide band frequency domain. Though power electronics now have voltage ratings up to several kV, it is difficult to design and fabricate high-voltage systems with the power electronic devices alone. So we have combined IGBT with technically designed transformer to get the high-voltage rectangular waveforms. In this work, next two things are the main factors. The first one is design of transformer working low-frequency domain of less than 10Hz. And the second one is adding offset voltage part. As a result, we can get variable frequency high-voltage rectangular waveform and this can be used as a voltage source of sandpaper manufacturing process.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.250-260
• /
• 2018

A pressure wave created by the photoacoustic effect is affected by the medium and by laser parameters. The effect of these parameters on the generated pressure wave can be seen by solving the photoacoustic wave equation. These solutions which are examined in the time domain and the frequency domain should be considered by researchers in acoustic sensor design. In particular, frequency domain analysis contains significant information for designing the sensor. The most important part of this information is the determination of the operating frequency of the sensor. In this work, the laser parameters to excite the medium, and the acoustic signal parameters created by the medium are analyzed. For the first time, we have obtained solutions for situations which have no frequency domain solutions in the literature. The main focal point in this work is that the frequency domain solutions of the acoustic wave equation are performed and the effects of the frequency analysis of the related parameters are shown comparatively from the viewpoint of using them in acoustic sensor designs.