• Economic and Environmental Geology
• /
• v.4 no.1
• /
• pp.1-9
• /
• 1971

The "Younger Granites" in Korea were being believed to be late Cretaceous in age and named "Bulkuksa granites" by all previous works until the writer had discovered Jurassic granite in 1963. The present paper is to prove its validity by age dating on these granites which was carried out by Professor Y. Ueda, Tohoku University, Japan. The age of 37 granites samples from various localities ranges from 68 my to 181 my. Of these 10 samples belonged to early Jurassic, 6 samples to mid-Jurassic, 4 samples to late Jurassic, 5 samples to early Cretaceous, and 12 samples to late Cretaceous in age. It is of the writer's opinion that the granites intruded in from early Jurassic to early Cretaceous age belong to Daebo granites and are syntectonic plutons associated with Daebo orogeny, and only those of late Cretaceous age belong to Bulkuksa granites that were associated with Bulkuksa disturbance. Daebo granites are aligned along NE-SW Sinian direction in the middle parts of Korea and crop out in the cores of folded mountains which were formed by Daebo Orogeny, such as Charyong, Noryong, Sobaek, and Dukyu Ranges. On the contrary Bulkuksa granites are restricted in Kyongsang basin and adjacent few localities in distribution and show no alignment. Granites supposedly associated with other disturbances of post-precambrian Have not been found so far in S. Korea. Age dating of granites has revealed that Daebo orogeny might be continuous from Songrim distur bance of late Triassic age. From this viewpoint, it could be assumed that Daedong system of Jurassic age were deposited in separate intermontain basins while Daebo orogeny was active, so that Daedong system in separate localities in Korea could not been correlated in their lithology as well as stratig raphy.

• Journal of the Korean earth science society
• /
• v.36 no.2
• /
• pp.190-197
• /
• 2015

This study investigated the paleoclimatic change using diatoms that were extracted from the high-resolution laminated layers of diatom ooze sediment cores GC08-EB01 in the eastern basin of the Bransfield Strait, Antarctica. The range of diatom valves per gram of dry sediment was from $0.4-4.2{\times}10^8g^{-1}$ in quantitative diatom assemblage analysis. Laminations are classified using visually dominant diatom species and terrigenous content. Biogenic diatom ooze laminae characterised by bloom of Corethron crilophilum, Eucampia antarctica, Fragilariopsis curta, F. kerguelensis, Odontella weissflogii, Proboscia inermis, R. styliformis, Thalassiosira antarctica, and Chaetoceros resting spores. Terrigenous laminae characterised by mixed diatom assemblage. The ratio of (Fragilariopsis curta+F. cylindrus)/Thalassiosira antarctica increase in horizons, suggesting increased sea-ice cover in the study area during the late Holocene (cold events). As a result, five cold events are identified on the basis of frequency of the critical taxa throughout the section.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.129-139
• /
• 2015

Concrete-Face Rock-Fill Dams (CFRDs) are rock-fill dams with watertight-concrete slabs on its upstream slope instead of its central earth cores. The design for CFRDs are still largely empirical and typically based on past experiences. This paper presents a description of the concrete face slabs and leakage behaviors of two post-constructed CFRDs based on the data gathered through instrumentation during the initial impoundment. The results show that the strain on the concrete face slab and the horizontal displacements of the vertical slab joints are slightly affected by both the seasonal temperature change and water loading during the initial impoundment. The deformation of perimetric joints are less affected by the temperature change, however it is significantly affected by the water loading during the initial impoundment. The leakage rate is significantly affected by the hydrostatic load and the deformation of the perimetric joints.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.1
• /
• pp.57-71
• /
• 2007

While a concept on biotop or the urgency of its classification systems have been under discussion recently, this study aims to examine outdoor biotop classification systems for environment-friendly community. To this end, the feasibility of creating a biotop in the community and application elements were generated and biotops were classified and categorized. Then, elements that can be applied in consideration of traditional Korean techniques were generated and biotop classification systems and specific components in residential areas were reviewed. As for the result of this study, based on a preliminary draft prepared through literature review, considerations for biotop classification systems were taken into account. Then, based on classification criteria for biotop formats, biotop functions and biotop types, a second-tier classification system was developed. Criteria for biotop formats included surfaces, lines and points while criteria for biotop functions were large cores, small bases, corridors, stepping stones and ecological islands. Criteria for habitat types were divided to include natural forest, developed green areas, lacustrine wetland, palustrine wetland, shrubs, grasslands, linear habitats, vacant plots and practical green areas, which were sub-categorized. As for the biotop classification system, macro-classification divided biotops into three types-space, line and point-based on biotop formats. Meso-classification had five groups and micro-classification had 21 groups based on habitat types. Future studies should focus on the ecological features of each biotop categories generated in this study and their creation and management techniques to find many practical methods to create, protect and manage outdoor biotop for environment-friendly community.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.19 no.2
• /
• pp.31-40
• /
• 2013

Purpose: It seems obvious that the hospital structures become more large-sized and tall-risen in Korea today. Nothing is more influential than the vertical core plan on the movements of various people in such large-tall hospitals. The present paper, therefore, aims to study on the efficient hospital core space paying first attention to patients by analysing the data on relations between/among department layouts of vertical and horizontal movements. Methods: This study sampled representative 14 hospitals and drew their degrees of data importance on the basis of precedented relative studies. This study also analysed their placements on the blueprint and made confirmations of their arrangements through their homepage on line. Actual visits were made to make sure of the spacial connections between/among departments in the hospitals as well. Results: Even in emergency case in need for vertical movements, the central main core spaces are usually used, which is because special vertical transportation systems are not provided. In these cases, the main core spaces are very important for those who have to move vertically and/or horizontally according to the locations and types of main cores. While special lifts or dumbwaiters are prepared to install for the important articles, such as samples of pathology department, most patients should share with regular visitors the elevators not separated visually and spatially from them. Implications: Vertical core plans are greatly dependent on the ward types and hospital styles. This study is hopefully expected to contribute itself to the standard setting-up of comfortable and quick vertical core system operations for patients.

• Smart Media Journal
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2012

This Paper proposes an effective SoC hardware architecture implementing a VDP for Full HD TVs. The proposed architecture makes real time video processing possible with supporting efficient bus architecture and flexible interface. Video IP cores in the VDP are designed to provide a high quality of improved image enhancement function. The Avalon interface is adopted to guarantee real-time capability to IPs as well as SoC integration. This leads to reduced design time and also enhanced designer's convenience due to the easiness in IP addition, deletion, and revision for IP verification and SoC integration. The embedded software makes it possible to implement flexible real-time system by controlling setting parameter details and data transmitting schemes in real-time. The proposed VDP SoC design is implemented on Cyclon III SoPC platform. The experimental results show that our proposed architecture of the VDP SoC successfully provides required quality of Video image by converting SD level input to Full HD level image.

• Journal of the Korean Geographical Society
• /
• v.47 no.5
• /
• pp.641-653
• /
• 2012

We analyzed two radiocarbon-dated lagoonal sediment cores from Cheonjinho and Ssangho using various biogeochemical methods. As a result, the start times of rice agriculture are estimated to be AD 780 for Cheonjinho and 100 BC for Ssangho. There is a large temporal difference in the beginning of rice agriculture between two study sites even though they are closely located on the coast. This result indicates that pollen records are not sufficient to approximate the start time of rice agriculture accurately. A temporal lag seems to exist between the time when rice agriculture was first introduced and the time when full-scale rice agriculture began in the Yeongdong region, probably because of low agricultural productivity. In both study sites, rice agriculture intensified and slope erosion increased 250 years after full-scale agriculture began. This suggests that intensified rice agriculture resulted in an increased number of inhabitants, settlement expansion to hilly areas, and the consequent deforestation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.97-106
• /
• 2004

A new test strategy for embedded SOC test is proposed. The SOC test is evaluated by the degree that is the amount of the total reduced test time. Since the test time for a embedded core is determined by the configuration of test wrapper, the total test time is decided by the length of the largest TAM used by the test wrapper. So the DFT(Design for Test) must be involved in the design flow. And the efficient test strategy must be settled. The all Previous test strategies are the methods that find a sub-optimal configurations of scan-chains to minimize the test time after the total TAM lines are divided into a few groups. But this is the NP-complete problem so that all attempts which examine such a TAM configuration and scan-chain division are impossible. In this thesis, a new methodology for this problem is proposed and the efficiency of the methodology is proved.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.65-73
• /
• 2007

This paper introduces design-for-test (DFT) techniques for low-cost system-on-chip (SoC) test. We present a Scan-Test method that controls IEEE 1500 wrapper thorough IEEE 1149.1 SoC TAP (Test Access Port) and design an at-speed test clock generator for delay fault test. Test cost can be reduced by using small number of test interface pins and on-chip test clock generator because we can use low-price automated test equipments (ATE). Experimental results evaluate the efficiency of the proposed method and show that the delay fault test of different cores running at different clocks test can be simultaneously achieved.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.446-457
• /
• 2017

In order to reduce the size of frame memory or bus bandwidth, frame memory compression (FMC) recompresses reconstructed or reference frames of video codecs. This paper proposes a novel FMC design based on discrete wavelet transform (DWT) - set partitioning in hierarchical trees (SPIHT), which supports fine-scalable throughput and is area-efficient. In the proposed design, multi-cores with small block sizes are used in parallel instead of a single core with a large block size. In addition, an appropriate pipelining schedule is proposed. Compared to the previous design, the proposed design achieves the processing speed which is closer to the target system speed, and therefore it is more efficient in hardware utilization. In addition, a scheme in which two passes of SPIHT are merged into one pass called merged refinement pass (MRP) is proposed. As the number of shifters decreases and the bit-width of remained shifters is reduced, the size of SPIHT hardware significantly decreases. The proposed FMC encoder and decoder designs achieve the throughputs of 4,448 and 4,000 Mpixels/s, respectively, and their gate counts are 76.5K and 107.8K. When the proposed design is applied to high efficiency video codec (HEVC), it achieves 1.96% lower average BDBR and 0.05 dB higher average BDPSNR than the previous FMC design.