• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.238-241
• /
• 1999

Analog-to-digital converter has attracted a lot of interests as one of the most prospective area of an application of Josephson Junction technology. Recently, the development of a digital-to-analog converter has been pursued to achieved the high performance. One of the main advantage in using single flux quantum logic in a digital-to-analog converter is the low voltage drop in a single Josephson Junction and hence the resolution of the output voltage of this digital-to-analog converter can be very high. In this work, we have used a software, called WRspice, to study a voltage multiplier circuit which is the basic block in building a digital-to-analog circuit. In simulation, we operated a voltage multiplier with .4 Josephson Junctions per stage and studied the dependence on the circuit bias currents and the circuit inductors of the voltage multiplier. Our simulation results showed a fast operation and reasonable circuit margins.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.847-850
• /
• 1998

One of the most difficult problem of designing VLSI is a mixed-circuit design, that is to design circuit containing both analog parts and digital parts. Digital to analog converter and analog to digital converter is a typical case. Especially it can be a serious problem when mixed circuit are put into a large digital circuit like microcontroller. However nowadays this problem is settled by separating analog circuit parts outside the IC. This technique is based on converting a digital signal into a pulse sequence. Then an analog signal is obtained by averaging this pulse sequence at the external low-pass filter. An anlog to digital converter is designed using a stochastic logic instead of a traditional PWM (pulse-width modulation) signal and ins implemente dusing FPGa. Stochastic pulse sequence can be made as a simple circuits and moreover can be mathematically processed by simple circuits -AND gates. The spectral property of stochastic pulse sequence method is better than that of PWM method. So it make easy to design a external low-pass filter. This technique has important advantages, especially the reduction of the ADC cost.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.577-578
• /
• 2008

This paper proposes new analog ZQ calibration scheme. Proposed analog ZQ calibration scheme is for minimizing the reflection which degrade the signal integrity. And this scheme is for minimizing CIO capacitance. It is simulated under 1.5v supply voltage and samsung 0.18um process. Power consumption of proposed analog ZQ calibration circuit was improved by 32%. Under all skew, temperature from $30^{\circ}C$ to $90^{\circ}C$ and Monte carlo simulation, quantization error of RZQ(=$240{\Omega}$) is less han 1.07%.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1003-1006
• /
• 2003

본 논문에서는 sub-micron 소자에서 SCE(Short Channel Effect) 억제를 위한 Halo 와 SSR(Super Steep Retrograde Well) 적용에 따른 analog 특성의 열화를 석하고 이를 개선하기 위해 Twist 이온주입과 In, Sb Halo 를 채택하였다. Analog 특성은 CMOS 의 amplifier 과 Comparator 로의 사용을 고려해 Drain Rout과 Early voltage를 이용해 나타내었으며 Digital 성능을 함께 고려하였다. 실험결과 NMOS 의 경우 45 twist Halo 조건에서, PMOS의 경우 As보다 Sb를 Halo 로 적용하는 경우 더 우수한 analog 특성을 나타내었다.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.93-96
• /
• 2001

A design methodology of analog circuits for a CMOS stereo 16-bit Δ$\Sigma$ DAC which are suitable for the digital audio applications is described. The limitations of Δ$\Sigma$ DAC exist in the performance of the 1-bit DAC and that of the smoothing filter. The proposed architecture for analog circuits contains the buffer between the digital modulator and the following analog stage and adopts the SCF (switched capacitor filter) and DSC (differential-to-single converter) scheme. In this paper, a guide line for the selection of the filter type for the SCF design in the Δ$\Sigma$ DAC is suggested through the analytical approaches.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.255-259
• /
• 2008

In this paper, a current-mode integrator for low-voltage, low-power analog integrated circuits is presented. Using the proposed current-mode integrator, the baseband analog filter is designed for WCDMA wireless communication. To verify the proposed current-mode integrator circuit, Hspice simulation using 1.8V TSMC $0.18{\mu}m$ CMOS parameter is performed and achieved 44.9dB gain, 15.7MHz unity gain frequency. The described 3rd-order current-mode baseband analog filter is composed of the proposed current-mode integrator, and SFG(Signal Flow Graph) method is used to realize the baseband filter. The simulated results show 2.12MHz cutoff frequency which is suitable for WCDMA baseband block.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.10
• /
• pp.795-804
• /
• 1989

A parallel analog-to digital converter with neuron-like elements is designed and optically implemented. Its operation principle is based on the simultaneous estimation of bit values for a given analog input. The architecture of the proposed analog-to-digital converter is simpler than that of an earlier one designed by the energy minimization technique, and its digital output is independent of the initial state. Mixed binary-to-full binary converters are also designed by using out analog-to-digital converters as basic computing elements. These converters have simple structures and fast conversion times compared with earlier ones.

• The Journal of Korea Robotics Society
• /
• v.2 no.3
• /
• pp.205-211
• /
• 2007

In this paper, the prototype of surface EMG (ElectroMyoGram) sensor is developed for the robotic rehabilitation applications, and the developed sensor is composed of the electrodes, analog signal amplifiers, analog filters, ADC (analog to digital converter), and DSP (digital signal processor) for coding the application example. Since the raw EMG signal is very low voltage, it is amplified by about one thousand times. The artifacts of amplified EMG signal are removed by using the band-pass filter. Also, the processed analog EMG signal is converted into the digital form by using ADC embedded in DSP. The developed sensor shows approximately the linear characteristics between the amplitude values of the sensor signals measured from the biceps brachii of human upper arm and the joint angles of human elbow. Finally, to show the performance of the developed EMG sensor, we suggest the application example about the real-time human elbow motion acquisition by using the developed sensor.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.49-50
• /
• 2015

Piezoelectric elements are one of good candidates able to replace motors in various electronics devices. It is slim and compact and low power consumption compare to motors. Linear regulator or class-D amplifier are generally used for piezoelectric element driver, however, suffers from severe power consumption. In this paper, electrical modeling of piezoelectric element will be presented and switching losses on the driver due to the parasitic capacitance will be analyzed. And new ZVS full bridge converter with an inductor will be proposed so as to reduce the power losses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.5
• /
• pp.315-322
• /
• 1986

In this paper, we have studied on the IIR digital filters design using Elliptic functions. In process of transformation to digital fouctions from analos Elliptic functions, Bilinear z transformation method has been silized. Designing of digital filter using the Bilinear z transformation the problems of aliasing can be avoidedm whereas the frequency distrotion is generated. The transformation form analog function to digital function is not equal in the region of the cut off frequency response caused by this effect. Avoiding the problem of this effect, we have used proewarping method. Finally, the magnitude characteristics of digital filters are compared with its of analog filters by computer simulation. The results have shown that the magnitude characteristics of digital filters by the prewarping method have made more remarkable improvement than its of analog filters.