• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.2
• /
• pp.34-41
• /
• 2014

The purpose of this study is to present the improvement of connection system between traffic information centers for reliable traffic information service. We recognized traffic information error caused by too much time in conjunction between traffic information centers, lack of reliability of traffic information caused by absence of generation time and generation institution of traffic information. We presented minimization methods of connection time, improvement methods of reliability of traffic information and development methods of connection state management system.

• Journal of Applied Reliability
• /
• v.4 no.2
• /
• pp.121-131
• /
• 2004

HALT (Highly Accelerated Life Test) was performed to improve the reliability by removing the potential failure for newly developing PCB used for the vibration condition from 2OHz to 2OOHz. During HALT, it is found that the lead of Al electrolytic capacitor of SMD type is detached from PCB. As the result for the failure analysis and FEM (Finite Element Method), it is clarified that the root cause for this failure is the improper attachment of an Al electrolytic capacitor on PCB by the mistake of a PCB design. HALT was performed in previous condition to verify the failure analysis after molding an epoxy resin to overcome the PCB design mistake and it is not observed the same failure. Therefore, it is assumed that the same failure in field will be not occurred by the proper implementation.

• Journal of Applied Reliability
• /
• v.16 no.3
• /
• pp.245-253
• /
• 2016

Purpose: The purpose of this study is to measure the reliability of complex equipment. Reliability of product is one of the most important factor to achieve competitiveness in the market. While there were many researches for assessing the reliability on components and modules, research on quantitative assessment tool for equipment with many component was little because of equipment's complexity. Methods: In this article, we developed index to assess reliability management system by using IEC 60300 and Reliability Management Tool-kit. With MIR and BARS, we developed reliability index clauses relevant to reliability activities and found weight factor for each clause by survey on experts. Results: The results of this study were as follows; reliability index that can assess both management side and technology side of the company was developed. Conclusion: Using this index, we assessed the reliability of a manufacturing equipment and found out the current reliability level of the manufacturing equipment, and derived improvement points.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.15-21
• /
• 2014

Due to the development of manufacturing technology scaling, more transistors can be placed on a cache memories of a processor. However, processors become more vulnerable to the soft errors because of highly integrated transistors, the reliability of cache memory must consider seriously at the design level. Various researches are proposed to overcome the vulnerability of soft error, but researches of tag bit are proposed very rarely. In this paper, we revaluate the reliability improvement technique for tag bit, and analyse the protection rate of write-back operation, which is a typical case of not satisfying temporal locality. We also propose the methodology to improve the protection rate of write-back operation. The experiments of the proposed scheme shows up to 76.8% protection rate without performance degradations.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.3
• /
• pp.149-159
• /
• 2009

Nowadays, as the importance of service-oriented architecture software is recognized, the market of service-oriented software is getting bigger. In response to this, the requirements of high reliability and quality about service-oriented architecture software is getting increased. In this research, we clearly suggested the evaluation method by giving a specific evaluation example to evaluate the reliability qualify of service-oriented architecture software. It is expected to raise the objectivity and the utilization by inducing the reliability qualify improvement from this research.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.36-44
• /
• 2007

This paper is focused on the optimum design for decreasing volume and increasing reliability of multi-stage gear drive. For the optimization on volume and reliability, multi-objective optimization is used. The genetic algorithm is introduced to multi-objective optimization method and it is used to develop the optimum design program using exterior penalty function method to solve the complicated subject conditions. A 5 staged gear drive(geared motor) is chosen to compare the result of developed optimum design method with the existing design. Each of the volume objective, reliability objective, and volume-reliability multi-objectives are performed and compared with existing design. As a result, optimum solutions are produced, which decrease volume and increase reliability. It is shown that the developed design method is good for multi-stage gear drive design.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.5
• /
• pp.107-114
• /
• 2011

The purpose of this paper is to develop a reliability estimation process of agricultural machinery components using field failure data. Estimating the durability is a time-consuming in the product development process. Using the field data of tractor, failures for major parts are investigated and databases are developed. Accelerated life test using the stress analysis could improve Weibull B10 considerably. This estimation process is useful for preparing the design input and planning the durability target.

• MALSORI
• /
• no.62
• /
• pp.149-161
• /
• 2007

In this paper we proposed a modified reliability function for improving bimodal speaker identification(BSI) performance. The convectional reliability function, used by N. Fox[1], is extended by introducing an optimization factor. We evaluated the proposed method in BSI domain. A BSI system was implemented based on GMM and it was tested using VidTIMIT database. Through speaker identification experiments we verified the usefulness of our proposed method. The experiments showed the improved performance, i.e., the reduction of error rate by 39%.

• Journal of Applied Reliability
• /
• v.14 no.1
• /
• pp.11-19
• /
• 2014

A colloidal silica slurry has been manufactured by mixing nano silica powders having different grain size to improve the reliability of Sapphire wafer CMP process. The main reliability problem of CMP process such as the breaking of wafer can be prevented by reducing the size of particles in a slurry. While existing commercial colloidal silica slurries are usually made of single grain size silica powder of about 120nm, in the present study 40nm and 100nm silica powders are mixed to achieve a similar removal rate. The new colloidal silica slurry showed wafer removal rate of $3.04{\mu}m/120min$ while that of a commercial colloidal silica slurry was $3.03{\mu}m/120min$. The roughness was less than $4{\AA}$ and scratch was 0. It is also expected that the reduction of the size of nano silica particles can improve the dispersion stability and prolong the useful life of the slurry.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.342-353
• /
• 2020

The purpose of this study is to identify priority factors for improving service quality of cosmetic stores in drug stores(DRS) and department stores(DES) and to provide basic data for improving service quality of cosmetic stores by analyzing the service quality based on the Kano model and the Potential Customer Satisfaction Improvement (PCSI) Index. As a result, most items of quality factors of cosmetic stores in both stores were evaluated as attractive quality factors. As a result of PCSI Index comparison, the quality factors of 'Reliability', 'Responsiveness', and 'Empathy' items for DRS and 'Empathy' and 'Reliability' items for DES had higher priority for improvement. That is, if these factors are improved, there is a high potential to improve customer satisfaction. Through this study, practical implications were provided by identifying service quality factor classification and priorities for customer satisfaction improvement of DRS and DES. This is expected to contribute to the guidelines for improving customer satisfaction in the future.