• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5A
• /
• pp.316-322
• /
• 2003

We theoretically analyze the properties of nonlinear distortion due to modulation instability (MI), which is a major factor of performance degradation in optical amplified transmission systems, and propose an optical link structure to compensate MI based on the analysis. The proposed MI compensating link structure is composed of optical phase conjugators (OPCs) and dispersion compensating fibers (DCFs) in order to suppress nonlinear effects in optical transmission links. It has been confirmed through computer simulations that the performance of the proposed compensation scheme is superior to that of conventional compensation schemes for 500 km transmission.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2017

In order to evaluate a stress state of concrete according to the change of tensile force of prestressed beam, improved nonlinear resonant ultrasonic spectroscopy(NRUS) method is proposed. This technique is advantageous to evaluate the stress state in initial state because the method shows much higher sensitivity than existing linear ultrasonic methods. The NRUS technique measure a nonlinearity parameter, which is calculated from the resonant frequency shift of ultrasonic wave related to the medium state, and the result is also closely related to the stress state of concrete. In this study, the nonlinearity parameter was measured with the change of tensile force to verify the close relationship between the two factors, and the effect of repetitive load cycle on the change of nonlinearity parameter was analyzed. In addition, sensitivity comparison with the linear ultrasonic pulse velocity method was performed. Through the experimental results, the possibility of NRUS technique for the evaluation of stress state in prestressed beam was confirmed.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.960-961
• /
• 2008

본 논문에서는 직선 및 곡선구간에서 구동력을 필요로 하는 LCD 패널 생산라인의 이송장비인 OHS 시스템에 적용이 가능한 횡자속 선형전동기의 제어에 관하여 기술한다. OHS 시스템은 클린룸 내에서 이송대차가 천장에 레일과 함께 설치되어 장거리의 직선 및 곡선 이송경로를 가지는 LCD 패널 물류 이송장치이다. 기존 선형전동기들은 그 구조상 곡선구간 구동원으로 적용하기 어렵고, 장거리 이송용으로 사용하기에 상당한 가격적인 부담이 발생된다. 따라서 본 논문에서는 상대적으로 다른 선형전동기와 비교하여 가격적인 부담이 적고, 곡선구간에서 구동력을 발휘할 수 있는 횡자속 선형전동기를 OHS 시스템에 적용하고, 선형전동기의 곡선구간에서의 출력특성을 분석하며, 이동자의 위치검출 방법 및 제어 알고리즘을 제안한다. 제안한 방법은 실제 제작된 OHS 실험장치를 통하여 제어특성을 검증한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.2
• /
• pp.163-173
• /
• 2012

This study covers the nonlinear analysis of anchor head for high strength prestressing strand and presents necessary process in improving the performance of anchor head. The surface of wedge for strand is contacted to the surface of the wedge hole on anchor head when it is fitted into the wedge hole, and the contact condition changes according to the level of load applied through the wedge. In order to analyze detailed behavior, nonlinear material model and contact element were used in analysis. It was found from the analysis that the behavior of anchor head is affected by the interaction with the wedge contacted so that the wedge in FE model should have the same figure as the actual object. Circular array of wedge hole presents better stress distribution than layer array even though the small difference in maximum deformation. Increment of thickness of anchor head and distance of wedge hole also improve the performance of anchor head.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.4
• /
• pp.435-443
• /
• 2010

This study presents key parameters for the structure installed with MR controller in reducing its responses. MR controller is regarded as Bingham model of which control forces are frictional and viscous ones. The parameters are identified as friction force ratios, $R_f$ and $R_h$ which are, respectively, ratio of MR controller friction force to static restoring force for free vibration and ratio of the friction force to amplitude of harmonic force. Structure-MR controller system shows nonlinear response behavior due to friction force. Energy balance strategy is adopted to transform the behavior to linear one with equivalent damping ratio. Finally, proposed equivalent linear process is compared to the nonlinear one, which turns out to give acceptably good results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.8
• /
• pp.565-571
• /
• 2020

In this paper, precision and efficient nonlinear structural analysis for the aircraft wing-box model is developed. Herein, nonlinear shell element based on the co-rotational (CR) formulation is implemented. Then, parallel computing algorithm, the element-based partitioning technique is developed to accelerate the computational efficiency of the nonlinear structural analysis. Finally, computational performance, i.e., accuracy and efficiency, of the proposed analysis is evaluated by comparing with that of the existing commercial software.

• Journal of Korean Society of Forest Science
• /
• v.84 no.1
• /
• pp.63-70
• /
• 1995

This paper discusses applications of neural network to stand stocking control problems. The scope of this research was to develop a neural network model for finding optimal stand management regimes and examining the performance of the model for field application. Performance was analyzed in consideration of the number of training examples and structural aspects of neural network. Research on network performance was based on extensive optimization studies for pure longleaf pine(Pinus palustris) stands. For experimental purposes. an existing nonlinear even-aged stand optimization model with a whole-stand growth and yield simulator was used to generate data samples required for the performance analysis.

• The Korean Journal of Financial Management
• /
• v.15 no.2
• /
• pp.369-399
• /
• 1998

Most of the studies on stock price predictability using the linear model conclude that there are little possibility to predict the future price movement. But some anomalous patterns may be generated by remaining market inefficiency or regulation, market system that is facilitated to prevent the market failure. And these anomalous pattern, if exist, make them difficult to predict the stock price movement with linear model. In this study, I try to find the anomalous pattern using the ANN model. And by comparing the predictability of ANN model with the predictability of correspondent linear model, I want to show the importance of recognitions of anomalous pattern in stock price prediction. I find that ANN model could have the superior performance measured with the accuracy of prediction and investment return to correspondent linear model. This result means that there may exist the anomalous pattern that can't be recognized with linear model, and it is necessary to consider the anomalous pattern to make superior prediction performance.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.189-194
• /
• 2001

본 논문에서는 10 GHz 이하에서 하나의 입력과 다수의 출력을 가지는 [10]에서 제시한 Taper형의 평면구조의 전력 분배/결합기의 구조를 수정하여 출력단의 폭이 다시 좁아지는 구조를 제안한다. 입력 정합 그리고 각 출력 단에서 출력 신호의 균형과 위상의 선형성을 위해 회로의 중앙에 하나의 원을 에칭 제거한 구조를 채택하여 2 GHz에서 개발한 전력 분배/결합구조를 [10]의 구조와 반사특성과 위상특성을 비교 분석하였다.

• Computational Structural Engineering
• /
• v.11 no.3
• /
• pp.229-239
• /
• 1998

복합재료는 강도-무게비가 다른 재료들에 비해 훨씬 크기 때문에 부재의 좌굴문제가 대단히 중요하게 취급되며, 본 논문에서는 축방향 압축력을 받는 복합재료로 된 쉘 부재의 좌굴해석이 수행된다. 이 재료는 일반적으로 이방성 재료 특성을 나타내 보이나, 섬유들이 한 방향으로만 배치되어 있는 경우 섬유방향에 연직한 평면에서의 강도나 탄성계수들은 모두 일정한 횡 등방성 재료성질을 가진 것으로 간주할 수 있다. 9 절점 degenerate 쉘 유한요소를 사용한 선형안정해석, LUSAS 범용 프로그램을 이용한 구조해석, 그리고 고전적 쉘 좌굴방정식에 의한 해석들을 수행하였으며, 그 결과들을 서로 비교, 분석하였다. 고려된 등방성 재료나 횡 등방성 재료의 경우 모두, degenerate 유한요소해석으로 계산한 임계하중들은 고전적 이론해에 의한 결과들 보다 낮았으며, LUSAS 결과들과는 거의 같았다. 이는 degenerate 유한요소에 의한 선형안정해석 결과들이 안전측에 듬을 의미하며, 복합재료로 된 쉘 구조물의 좌굴해석에 degenerate 유한요소를 효율적으로 적용할 수 있음을 의미한다.