At present, company has to produce a product that consumer like with a competitive price, a good quality, and a fitting time to supply. Process control and qualify control are very important to supply with a product uniformly and inexpensively In this paper, the characteristic of product quality is monitored by control chart during the machining process and construction of quality control cycle is considered to divide into two types in this case that different assignable causes lead to shifts having different magnitudes. Then we are intended to find a process shift magnitude which has economical quality cost policy and are considered to quality cost functions to find a process shift magnitude. Those costs are categorized into the well-known categories of prevention, appraisal, and internal failure and external failure. This paper ends with numerical examples that demonstrate the usefulness of the model.

A capital investment problem is essentially one of determining whether the anticipated cash Inflows from a proposed project are sufficiently attractive to invest funds in the project. The net present value(NPV) criterion and internal rate of return(IRR) criterion are widely used as means of making investment decisions. A positive NPV means the equivalent worth of the inflows is greater than the equivalent worth of outflows, so, the project makes profit. Business people are familiar with rates of return because they all borrow money to finance ventures, even If the money they borrow is their own. Thus they are apt to use the IRR in preference to the NPV. The IRR can be defined as the discount rate that causes the net present value of a cash flow to equal zero. Why the project are accepted if the project's IRR is greater than the investor's minimum attractive rate of return. Against the NPV, the definition cannot distinctly explain the concept of the IRR as decision criterion. We present a new definition of the IRR as the ratio of profit on the invested capital.

The result of management profits create to manufacturing activity. The gross sale profits must be maximum thraw spend of economic value. The profit maximum have to management based key value driver of manufacturing activity. The important factors of the study model are manufacturing value driver(MVD) and manufacturing value added(MVA). We show necessity of management based value by means of a case study.

The problem of qualitative reliability system is very important issue in the digitalized nuclear power plant, because the failure of its system brings about extravagant economic loss, extensive environment destruction, and fatal damage of human. Therefore this study is to develop the reliability evaluation model through the normalized scoring model by the quantitative and qualitative factors considering the advanced safety factors In the Advanced Pressurized water Reactor 1400MWe(APR 1400) under uncertainty Especially, the qualitative factors considering the information and human factors for the systematic and rational justification have been closely analyzed. The reliability evaluation model can be simply applied in real fields in order to minimize the industrial accident and human error in the digitalized nuclear power plant.

Product Liability(PL) is a legal policy to deal with global competition by improving domestic industrial competitive power and to reduce the cost of defect products. The purpose of this paper is to address the state of the art solutions to dispute on PL, in reality of a frequent occurrence of global product exchange focussing on product safety that is one of the most important functions of PL and to improve solution of the product safety and reliability responsive to PL. To minimize PL exposure, manufacturers should reflect comprehensive product safety and reliability concepts in establishing PL prevention policies. PL prevention policies are composed of administration system, product safety management system, and total quality management system in respect of prevention, safety, and defence.

In order to review the failure rate of PC monitor under normal environmental conditions, we experimented for various levels of each factors, e.g Power on/off, DPM mode, using voltage, Incoming Surge, Torque strength etc. According to the results of experiment and SN ratios we investigated that the causes of the failure for the horizontal output TR of monitor are Mode change, dispersion of Torque and $h_{FE}$ and these are critical effect. For the new reliability test we suggested that strengthened part tests In IQC branch, Torque change controls in the TR specification are necessary.

퍼지 균등화(fuzzy equalization)는 어의론적으로(semantically) 의미있고, 실험적으로 (experimentally) 의미있는 언어라벨(linguistic labels)을 붙이도록 하는 조건이다. 지금까지 발표된 퍼지 균등화조건을 갖는 퍼지분할을 생성하는 알고리듬은 주어진 데이터에 대하여, 오직 하나의 퍼지분할만을 생성할 수 있다. 만일 생성된 퍼지 분할이 더 이상 유용하지 못한 것으로 판명되면, 이 알고리듬은 주어진 데이터에 대한 퍼지 균등화조건을 갖는 퍼지분할을 생성할 수 없다. 이는 생성된 퍼지분할을 사용하여 탐색적 발견을 수행하는 데이터마이닝인 경우 더 이상 프로세스가 진행되지 못함을 의미한다. 본 연구에서는 주어진 데이터에 대한 퍼지 균등화조건을 갖는 서로 다른 두 퍼지분할이 존재한다면, 어떠한 관계가 있는지를 증명하고, 위치적 특성을 서술하였다. 이 특성은 추후 퍼지 균등화조건을 갖는 퍼지분할을 원하는 만큼 생성할 수 있는 알고리듬을 만드는데 유용하게 사용 될 수 있다.

A Korea next-generation high-speed rail system represents a typical example of large- scale multi-disciplinary systems, consisting of subsystems such as train, electrical hardware, electronics, control, Information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. The system therefore, must be developed using systems engineering that is a efficient and effective methodology to design such a complex system and manage its development. This paper presents the results from a computer-aided systems engineering application to the Korea next generation high-speed railway project. Especially, the focus of the study was on requirement management and PBS management.

Recently, due to the development of internet based information technology, organizations Is utilizing electronic documents as important media for processing business work and sharing Information exchange. These electronic documents are mos4 form like documents and are important user interfaces for business applications. But, presently web-based electronic documents are lack of the characteristics that are taken in documents, such as document writing rules and its workflow. This Paper deals with XML-based business document that include the structure, data, and logic and proposes the framework for validating the data and logic included within business documents using Prolog.

This study performed to evaluated musculoskeletal disorders(MSDs) during sitting work. The musculskeletal system is affected by various work factors such as strength, weight, posture, repetition, duration and exertion. Ergonomic study on sitting work is necessary to evaluate these factors affecting human body. But the strength and work load data by the work factors are insufficient in Korea. Therefore, this study evaluated the work load using the elcctromyogram(EMG) and measured the arm strength by arm posture and push pull work during sitting work. to evaluated muscle load, the vertical height and horizontal angle of arm were adjusted around acromion. And EMG data were recorded on pc during the test.

This paper examines the effects on mental fatigue of changes in the intensity of physical activity. A treadmill-equipped instrument and perception tester were used to attain several levels of physical activity In this paper, In order to determine the individual levels of physical activity of subjects, Borg-RPE scale, Heart Rate(HR) and Respiratory Quotient(RQ) were used. Also, an addition test in whole-body activity on treadmill-equipped instrument as an indicator of mental fatigue were performed. In the above experiments, the scores obtained in addition test administered before and after physical activity at each intensity level used. Restricted within the limits of this paper, the results of these tests showed that mental fatigue decreased after physical activity.

The study has the three purposes; 1) to investigate the relationship between job stressors and perceived job stress, 2) to understand the effect of perceived Job stress and job attitude (job satisfaction, job involvement), and 3) to examine the role of moderators such as social support and personality in the relationship between job stressors and perceived job stress in information system organizations.

분산된 조직들 간의 다양한 업무정보의 효율적 교환과 제품제조정보의 자유로운 유통은 생산성향상에 크게 기여한다. 이를 위해 인터넷기반 'Manufacturing Desk'를 개발하여 분산된 제조조직들 사이에서 제품생산과정 중 발생하는 문제를 효율적으로 해결하고 제조정보의 원활하고 신속한 공유 및 흐름을 유지하고 궁극적으로 제조조직의 생산성을 높일 수 있도록 하였다. 이를 위해 자동차의 프레스금형 생산을 대상으로 사례기반 추론과 검색을 구현하였다. 실시간으로 제조조직들을 연계하여 업무효율성을 높이기 위해 Net Meeting의 기능을 구축하였다.

In the study, we propose, for the practical approaches of job shop scheduling, the new dispatching rules of Job shop scheduling in order to complement the practical applications in the existing researches. The performance of the new dispatching rules is compared and analyzed with the existing methods through the computer experiments in the assumed conditions. The results can be useful to improving a field application of the job shop scheduling.

This paper addresses a problem of machining route selection and determination of input quantity with yield in multi-stage flexible flow system. The problem is formulated as nonlinear programing and the proposed model is solved by genetic algorithm(GA) approach. The effectiveness of the proposed GA approach is evaluated through comparisons with the optimal solution obtained from the branch and bound for the same problem.

Presented is a Genetic Algorithm(GA) for dynamic partitioning an ATM LANE(LAN Emulation) network. LANE proves to be one of the best solutions to provide guaranteed Quality of Service(QoS) for mid-size campus or enterprise networks with a little modification of legacy LAN facilities. However, there are few researches on the efficient LANE network operations to deal with scalability issues arising from broadcast traffic delivery. To cope with this scalability issue, proposed is a decision model named LANE Partitioning Problem(LPP) which aims at partitioning the entire LANE network into multiple Emulated LANs(ELANs), each of which works as an independent virtual LAN.

Research and Development(R&D) was once considered to be a unique, creative and unstructured process that was difficult, if not impossible, to manage and control. R&D decisions impact the entire enterprise. Therefore, decisions must not be based solely on R&D's perception of what is important or worthwhile. R&D contributions are difficult to measure separately from other functional organizations such as manufacturing and marketing. While some firms are attempting to overcome perceived limitations in traditional accounting-based performance measures using ROI, EVA, others are embracing the use of non-financial measures for decision making and performance evaluation. In particular, many firms are implementing 'Balanced Scorecard(BSC)' systems that supplement traditional accounting measures with non-financial measures focused on at least three other perspectives-customers, internal business processes, and learning and growth. AHP is a popular multi-attribute decision making model that allows for the development of importance rankings. The AHP has been applied in a wide variety of practical settings to model complex decision problems. The former, determine Perspectives and the Key Performance indicator(KPI) through the former research, the latter compose the questionnaire for determine the weight of perspectives and KPIs. And then, make a survey with researchers about 4 perspectives and 18 KPIs. The results will be simulate with Expert Choice 2000 for determine the weights. This results helps establish the firm's business strategy and technology strategy The firm should establish the business strategy to consider market position, business growth potential, and technological capabilities.

Clustering of data is of a great interest in many data mining applications. In the field of document clustering, a document is represented as a data in a high dimensional space. Therefore, the document clustering can be accomplished with a general data clustering techniques. In this paper, we introduce a document clustering system based on similarity among documents. The developed system consists of three functions: 1) gatherings documents utilizing a search agent; 2) determining similarity coefficients between any two documents from term frequencies; 3) clustering documents with similarity coefficients. Especially, the document clustering is accomplished by a hybrid algorithm utilizing genetic and K-Means methods.

We study clustering algorithm for sequences of categorical values. Clustering is a data mining problem that has received significant attention by the database community. Traditional clustering algorlthms deal with numerical or categorical data points. However, there exist many important databases that store categorical data sequences. In this paper we introduce new similarity measure and develope a hierarchical clustering algorithm. An experimental section shows performance of the proposed approach.

In this paper, we model a two-server queueing system with priority, to which we put a restriction of the number of servers for each customer class. A group of customers is divided into two different classes. The class 1 customers has non -preemptive priority over class 2 customers. We use the method of PGF depending on the state of server We find the PGF of the number of customers in queue, server utilization, mean queue length and mean waiting time for each class of customers.

This paper presents an approach to derive probability models for use in structural reliability studies. Two main points are made. First, that it is possible to translate engineering and physics knowledge into a requirement on the form of a probability model. And second, that making assumptions about a probability model for structural failure implies either explicit or hidden assumptions about material and structural properties. The work is foundational in nature, but is developed with explicit examples taken from planar and general stress problems, the von Mises failure criterion, and a modified Weibull distribution.

This paper presents the business model and system functionalities of a B2B e-marketplace solution that not only can overcome some problems of the public e- marketplace, but also can be applicable to both public and private types of e-marketplaces. This solution is different from the most of the public e-marketplace solutions that their main sources of revenue are transaction commissions or transaction fees through the third-party intermediation. Instead, this solution provides an ASP (Application Service Provider) functionality for direct, dis-intermediated purchasing and sales-related transactions between suppliers and buyers. With this functionality, suppliers and buyers electronically commerce with each other without the disclosure of their transactions as well as transaction commissions.

In the form of B2C transaction, making an on-line order by using the website increases rapidly. An off-line order at the whole sale outlets is geometrically increasing. However, it is so true that both types of market are showing a tendency to become computerization. As to apply this type of computerized B2B transaction to this kind of large scale wholesale outlets, the most important fact to be considered is that there must have no data error. In addition to this, an accurate counting of actual stock is a precondition to decide a suitable amount of production and a timely delivery of goods. In this study, reducing elements of the risk that may create a difference In between actual stock and that in the computer, the integrated B2B ordering system is designed by taking actual cases an example in order to manage the information for a sale, which is conducted by various system in the large scale wholesale outlets such as E-mart, Carefour or the same kinds.

The Internet, as a commercial tool, provided a new market that connects producers to consumers through I-commerce. 2-commerce through the Internet became a new trend in all industries. This research indicates problems that block the activation of I-commerce of agricultural products, which is less developed than the other industries. To solve the problems it suggests E-commerce for agricultural products combining on and off line markets. It also suggests data mining technique for analyzing entire information in system.

In this paper, we consider a multi-factor, multi-cause decision making problem of supply chain. And we show how to measure the operational efficiency of the components in supply chain and also how to improve the efficiency of each component and whole supply chain. As a methodology, the data envelopment analysis (DEA) is adopted to measure the efficiency by considering weight factors such as flexibility, information sharing, logistics level, etc. The proposed algorithm allows whole supply chain to have the improved efficiency rate.

As a environment of SCM is issued recently, many enterprises are concerned about inventory control for an efficiency of operation and reliablity. The goal of them is to match up to improving of facilities and redoing of inventory cost. To put an efficiency in the operation rate of facilites, A moderate provision of spare parts for that would come into a matter. This study designs two-echelon spare parts distribution system and sees over the relationship between operating rate and inventories of spare parts. and then it determines fitting inventories and investment cost considering an operating rate.

The primary objective of Supply Chain Management (SCM) is to optimize the cash, material and information flow for satisfying customer demands through coordinating the relationship between Supply Chain components such as suppliers, manufacturers, and inventories, etc. By Supply Chain Planning (SCP), operation tasks or goals, should be done in specific due date, are ordered to each SC component for achieving such objective. However, the achievement for operation tasks or goals is affected by uncertainties in SC. In general, reliability theory Is explained as the probability that a product or system will perform its specified function under prescribed conditions without failure for a specified period of time. Therefore, the reliability of SC can be defined as the probability that SC will satisfy customer demands until the specific due date. In this paper, a basic framework to evaluate reliability is respectively proposed as supply chain components, and then a overall framework to estimate the reliability for SC is also proposed.

In case of the problems with multiple plants, alternative operation sequence, alternative machine, setup time, and transportation time between plants, we need a robust methodology for the integration of process planning and scheduling in supply chain. The objective of this model is to minimize the tardiness and to maximize the resource utilization. So, we propose a multi-objective model with limited-capacity constraint. To solve this model, we develope an efficient and flexible model using adaptive genetic algorithm(AGA), compared to traditional genetic algorithm(TGA)

In this paper, we propose a freight and fleet optimization model under CVO environment. The model is a kind of multi commodity network flow model based on Vehicle Routing Problem(VRP) and Vehicle Scheduling Problem(VSP), and considering operations and purposes of CVO. The main purpose of CVO is the freight and fleet management to reduce logistics cost and to Improve in vehicle safety. Thus, the objective of this model is to minimize routing cost of all the vehicle and to find the location of commodities which have origin and destination. We also present some computing test results.

Under the sudden change of competitive environment, the economic cooperation as a part of survival strategy is being a big issue among countries. There was much discussion based on the geological adjacency as well as cultural homogeneity regarding the economic cooperation of three countries, Korea, China, Japan. It has been also known that major trade countries of the world concluded the treaty of region trade, then extended the number of export, and drew a success in foreign direct investment. Resent automobile industry is being ran by the center of America, Europe and Japan. Korea only has a successful experience of restoration of automobile industry in the half of a century after his beginning. It is true that China is trying to do best to raise his automobile industry. Also Japan is a leading automobile country guiding automobile industry all over the world. It can be considered that Korea will play a major role in the three countries' automobile industry based on Japanese demonstrated technology, Chinese resources, market and experience with their economic cooperation. Therefore it is expected that a big result will be achieved throughout such a role play of each country. This paper has a purpose to light up the distinctive quality and the present condition of each country in automobile Industry, and to promote the foundation of three countries' economic cooperation. It is convinced that the economic cooperation of three countries, Korea, China and Japan in automobile industry, will play a great role in the world automobile market.

With agreement from the US, EU, and other countries, China joined in WTO(World Trade Organization) on December 1, 2001. So it is expected that Korea will not expand bilateral trade but also face severe competition with China for world and Chinese market. After Chinese accession to WTO, the aspect of Korean companies may be considered to be reduced the aspect of opportunity and risk by half. Accordingly, Korean domestic companies have to search countermeasures optimized to get global competition by considering the aspect of opportunity and risk. Therefore, the purpose of this study is to review the potential possibility of China as a world market and to provide countermeasures for major Korean domestic industries.

The sales activity of most of small manufacturing companies is based on orders of buyers. The process of promotion, receipt and selection of orders of the manufacturers is closely coupled with the load status of the production lines. The decision on whether to accept an order or not, or the selection of optimal order set among excessive orders is entirely dependent on the schedule of production lines. However, in the real world, since the production scheduling activity is mainly performed by human experts, most of small manufacturers are suffer from being unable to meet due dates, lack of rapid decision on the acceptance of new order. To cope with this problem, this paper deals with the development of an agent for selecting an optimal order set automatically. The main engine of selection agent is based on the typical job-shop scheduling model since our target domain is the injection molding company. To solve the problem, we have formulated it as IP (Integer Program) model, and it has been successfully implemented by ILOG and selection agent. And we have suggested an architecture of an agent for tackling web based order selection problems.

A study on processing for producing cure seat radiated by Original Infrared Rays and Magnatic force. We are well aware that Original Infrared Rays and Magnatic force influence on our human body benificially. In the technical background of this research product, we treated that the product has some operations of ceramic hardwood charcoal, far infrared rays and magnetic, so it can serve large part curative values made of far infrared rays and magnetic force of ceramics. Also, in the special quality of the product deal with ceramic, hard charcoal, ferrite, gelatin what is needed in production. And among them, ferrite, ceramic and hard charcoal are introduced by the manufacturing process of the moleculeization. In concluding, this study described the manufacturing process on the basis of the worksheets and arranged the useful effect which effect on human body. There are so many symptoms in the pain of muscle. It's very various. for example, it is the cause of the liver, the spleen and a kidney function's weakening. the cause of the backbone subluxation, the cause of the shoulder joint and scapula, the cause of the sacrum and iliacjoint, the cause of hip joint and the cause of a sprain. In this thesis, we mainly deal with the method which the muscle and nervous system disease by fatigue and a sprain cure seat radiated by Original Infrared Rays and Magnatic force. then, Original Infrared Rays and Magnatic force pack up frapezius muscle, gluteus minimum muscle, gluteus medius muscle, gluteus maximus muscle, pririformis muscle around the spine. through this course the moral pressure by the nervous system disease can be treat.

전자의무기록은 환자의 완전하고 정확한 자료와 다양한 의학지식에 기초한 기억보조와 의사결정보조 도구를 위한 것이다. 본 연구에서는 전자의무기록을 최초로 3차원 그래픽스를 이용하여 환자가 통증부위를 정확하게 표현할 수 있게 한다. 3차원의 입력정보를 70370개의 셀로 표현함으로써 효율적으로 저장하고 분석할 수 있게 한다. 또한, 본 연구에서 개발한 통증진단시스템은 재활의학과에(의학에)서 정의하고 있는 169가지의 근육통 패턴들을 지식기반으로 저장하여 환자의 통증부위를 효율적으로 비교하고 유사도를 계산하여 진단한다.

Since 100PPM Quality Certification System has been established by the Industrial Advancement Administration in 1995, 100PPM Quality Innovation Movement has contributed much to the enhancement of quality competitiveness of Korea's parts industry. And in 2000, raised to a higher level, Single PPM Quality Certification System has been established by the Small and Medium Business Administration. Single PPM Quality Innovation Movement seeks to reduce the number of defects to below 10, out of one million industrial items produced. Ultimately, Single PPM Quality Innovation Movement aims at achieving perfection, by enabling a zero defect rate In industrial production through the participation of all members of an organization. So this study aims to show the tangible and intangible effects of Single PPM Quality Certification System. and to suggest a methodology to improve current problems of Single PPM Quality Innovation Movement.

Modern society is an interaction between many different environments. It is important to the mutual relationships between people and especially between people and the environment. One of the mutual relationships between people and the environment is the traffic system, especially the traffic signals which give priority to pedestrian and traffic flow. Traffic signals for the pedestrian on the crosswalk contribute to a safe road environment for the pedestrian, while the traffic signals for the pedestrian running for the flickering of the green signal causes psychological stress. Therefore, this study investigated whether the walking velocity was influenced by the flickering of the green signal or not. Also, this study investigated whether the walking distance had an effect on the walking velocity of the elderly pedestrian or not. It was proved that the flickering of the green signal and the walking distance influenced the walking velocity and subjective sensitiveness according to the result of this study.

Nowadays, due to the popularization of mobile phone, the functions and using manners of mobile phone have been varied. According to Korea National Statistical Office, the numbers of domestic mobile phone user were 30 million at the end of March 2002. A survey was conducted to investigate the various using manners of mobile phone, especially the young ones from 15 to 28 years old. Two hundred and sixty people participated in this study. According to the result of this study, text messaging was one of the major functions of the mobile phone for the young people. Also, continuous and repetitive use of small key pad of mobile phone for text messaging could cause the repetitive strain injury on hand, especially fingers.

The goods development considering the foot characteristics of Korean and design of the sports shoes need to satisfy the customer emotion. For this, the sports shoes have to give the customer desire and satisfaction and be accomplished the distinction and luxury of goods for sports shoes. This study obtained a basic data on the customer preference and emotion with human sensibility ergonomics approach and formed the database to use easily. Also based on the database, this study developed an interface which the customer be able to select the sports preferred shoes.

The midsole hardness of athletic footwear affects capability of absorbing impact shock and controls rearfoot movement during running and walking. The prior studies were focused on examining the proper hardness of footwear for rearfoot movement or to finding effective hardness for absorbing impact shock. The displacements of maximal Achilles tendon angle described a amount of pronation motion is decreased when medial hardness of midsole is large more than lateral. Increasing hardness of footwear midsole are effected to reduce maximum and intial pronation angle, but declined the ability of impact shock during heelstrike. For determination of effectiveness hardness of midsole, therefore, the study that makes a compromise between rearfoot movement and absorbing impact during footstrike must be performed. The purpose of this study is to examine quantitative values of rearfoot control and absorbing impact shock with different hardness of medial and lateral midsole on heel portion. The results are useful to define biomechanical hardness of midsole for developing running shoes. As variable for impact shock, accelerations onto shank and knee are measured during 4 running speeds (5, 7, 9, 11km/h). Also, maximum and $10\%$ pronation angle (Achilles tendon angle) were measured using high-speed camera.

족형 설계를 위한 발 치수의 측정과 관련된 국내 연구는 매우 부진한 형편이다. 발과 관련된 치수의 자료로는 1992년 공업진흥청(현 중소기업청)에서 실시한 국민인체 측정 조사 연구 (공업 진흥청, 1992)와 1997년 국민체위조사를 바탕으로 국민 치수 표준화 연구(기술표준원, 1999) 등 극히 미미한 실정이다. 그리고 측정된 데이터는 주로 마틴식기기를 사용하여 측정함으로 측정시 생길 수 있는 여러 오차, 즉 측정오차, 입력오차 등을 내재하고 있는 실정이다. 이 논문에서는 측정시 생길 수 있는 오차를 최소화하면서 반복성과 재현성이 뛰어난 3D 측정기기를 선정, 사용하여 일반적인 신발제작자들이 필요로 하는 그리고 일반 논문에서 제시한 신발 제작시 요구되는 발 치수에 관련된 데이터를 얻기 위한 의사결정지원시스템을 전개하였다.

본 연구에서는 현장작업자의 근골격계질환을 진단하고 예방하기 위해 인간공학 프로그램을 제안하였다 본 연구에서 제안된 인간공학 프로그램은 작업자를 근골격계질환으로부터 예방하고 환자가 발생하였을 때 적시에 적절한 치료를 받게 하며, 작업장에 재배치된 이후 재발하지 않도록 관리하는데 목적이 있다. 본 연구에서 제안된 인간공학 프로그램은 크게 생체동작분석, 인간공학적 작업환경분석, 의료관리 및 근육강화 프로그램운영으로 나뉘어 진다. 본 연구에서는 생체동작분석 및 인간공학적 작업환경분석을 위한 항목을 제시하였고, 의료관리와 근육강화 프로그램의 필요성이 언급되었다. 본 연구에서 적용된 인간공학 프로그램은 국내 제조업 현장에 적용할 수 있도록 제안되었으며, 국내 인간공학 프로그램의 적용방법중의 하나로 사용될 수 있을 것이다.

Line Balancing is the method enflowing workparts smoothly by balancing the worktime of processes, and reduces the cycle time. Soccer is the sports attacking the opposite team and defending a friendly area efficiently by means of ball. To accomplish this purpose, space balancing is the necessary condition. Soccer 'system' what we called 'formation' is the basic frame to balance the space of playground, operate the tactics. This paper introduces 'Dual Hexagon System', a quite new system in soccer, using line balancing principle. It also explains the correlations between line balancing and dual hexagon system, distinctions and position names of dual hexagon system, and then suggests success factors.

As one of the developing countries in the world trade market, we have to apply the environmental concept at the development of a product for environmentally conscious manufacturing system(ECMS). Traditionally, Production control model has been studied based on a new product manufacturing environment. However, ECMS such as a remanufacturing system should be developed and implemented for highly competitive environment in 21C. The objective of this study was to extend the research of production control model by applying it at the remanufacturing environment of ECMS and to test the applicability of current production control model at the remanufacturing environment by the simulation experimental study.

This study deals with a Logistics Information System(LIS) in recording industry. Many companies developed a LIS to minimize logistics cost and improve customer services. However, due to the diversity of distribution structure and the complexity of logistics process, developing an LIS in recording industry is complicated. This paper analyses the current situation in domestic recording industry and presents a framework of LIS. This system is composed of the front office related to the logistics processes and the back office related to the rest of the processes. This system can be used to develop an LIS in logistics industry. Some examples are given and discussed to validate the proposed LIS.

In a mega competition having no national boundaries, we have to apply the logistics system considering an environment seriously and to construct the environmentally conscious logistics system (ECLS) with the forward and reverse logistics system of a companies. The objectives of this research were to provide strategies required for implementation of the environmentally conscious logistics system. And also, we propose the future research topics needed for improvement of the studies on environmentally conscious logistics system.

We are concerned with a long-term replenishment contract for the ARIMA demand process in a supply chain. The chain is composed of one supplier, one buyer and consumers for a product. The replenishment contract is based upon the well-known (s, Q) policy but allows us to contract future replenishments at a time with a price discount. Due to the larger forecast error of future demand, the buyer should keep a higher level of safety stock to provide the same level of service as the usual (s, Q) policy. However, the buyer can reduce his purchase cost by ordering a larger quantity at a discounted price. Hence, there exists a trade-off between the price discount and the inventory holding cost. For the ARIMA demand process, we present a model for the contract and an algorithm to find the number of the future replenishments. Numerical experiments show that the proposed algorithm is efficient and accurate.

This research is basically deals with an inventory distribution system with several regional sales branches. Under the continuous review policy, each sales branch places an order to its supplier whenever on hand plus on order inventory falls on the order point, and the order quantity is received after elapsing a certain lead time. This research first shows the method how to apply the product with low lever of demand into the continuous review policy. For the application, we use an order level as the maximum level of inventory during an order cycle. Also we analyze the lost sales case as a customer behavior. Further we use variable demands and variable lead times for more realistic situation. Based on the above circumstances, the research mainly discusses those methods to decide the optimal order level, order point, and order quantity for each sales branch which guarantees the system wide goal level of service, while keeping the minimum level of the system wide total inventory.

In case of pn control chart often used in mass production system of plant industry and so on, we could evaluate it's performance by the approximation to normal distribution. It has many differences according to sample sizes and defective fraction, and have disadvantage that needs much samples to use the normal distribution approximation. Existent control charts can not detect the cause of process something wrong because it is taking the sampling intervals of fixed length about all times from the process. Therefore, to overcome this shortcoming we use VSI(variable sampling intervals) techniques in this paper. This technique takes a long sampling interval to have the next sampling point if the sample point is in stable state, and if the sample point is near control lines, it takes short sampling interval because the probability to escape control limit is high. To analyze performance of pn control charts that have existent fixed sampling intervals(FSI) and that use VSI technique, we compare ATS of two charts, and analyze the performance of each control chart by the sample sizes, process fraction defective and control limits that Ryan and Schwertman had proposed.

In this study, according to MARMA(1,0) model which was suggested by Seppala, in case of existing autocorrelation in X control chart and EWMA control chart, the standard method and the non-parametric bootstrap method were compared and analysed using the bootstrap method which use the resampling prediction residual.

In this paper, We consider some generalization of these five basic indices to cover non-normal distribution. The proposed generalizations are compared with the five basic indices. The results show that the proposed generalizations are more accurate than those basic indices and other generalization in measuring process capability. We compared an estimation methods by Clements with based on sample percentiles, WVM to calculate the proposed generalization as an example. The results indicated that Clements method is more accurate than percentile method, WVM in measuring process capability. But the calculations of percentile method are easy to understand, straightforward to apply, and show be valuable used for applications.

As the value and relative importance of service industry boosts in modern society, to strengthen competitiveness companies starts to recognize the quality of service as a key component in their business operations. Furthermore, companies that apply the quality of services as their competitive method are concentrating more on the area of quality control. Nevertheless, the previous researches related to this area were more focused on the aspect of measure rather than the control. In this paper, each fractionated customer group in consideration of its characteristics is made in use of estimating the quality of service using the conjoint analysis. The principal variable selective method which a small number of variables is used to control a large number of variables is applied. Hotelling's $T^2$ control chart is applied to administer many relative variables of the quality of service because it is a Multi-item. If abnormal indications appear by adding new data, the method to find and improve variables using MYT decomposition is suggested to apply.

Batch processes are a significant class of processes in the process industry and play an important role in the production of high quality speciality materials. Examples include the production of semiconductors, chemicals, pharmaceuticals, and biochemicals. With on-line sensors connected to most batch processes, massive amounts of data are being collected routinely during the batch on easily measured process variables such as temperatures, pressures, and flowrates. In this paper, multivariate SPC charts for on-line monitoring of the progress of new batches are developed which utilize the information in the on-line measurements in real-time. We propose the formation of statistical model which describes the normal operation of a batch at each time interval during the batch operation. An on-line monitoring scheme based on the proposed method can handle both cross-correlation among process variables at any one time and auto-correlation over time. And the control limits for the monitoring charts are established from sound statistical framework unlike previous researches which use the external reference distribution. The proposed charts perform real-time, on-line monitoring to ensure that the batch is progressing in a manner that will lead to a high-quality product or to detect and indicate faults that can be corrected prior to completion of the batch. This approach is capable of tracking the progress of new batch runs, identifying the time periods in which the fault occurred and detecting underlying cause.

Six Sigma is one of the most active subjects in quality management. This study deals with some existing weaknesses that may arise in implementing Six Sigma in real world situations. The main weaknesses discussed here include the lack of understanding of cultural aspects on the nations and industries, the poor linkage between quality, finance and accounting from the bottom line point of view, and the difficult development process of metrics for all improvement results to validate the effect of Six Sigma. Finally, the key success characteristics for a good Six Sigma project are presented.

Machine condition diagnosis is the technique to perceive the machine errors and the abrasion online without overhaul. We need the steps to predict the life span and reliability of a machine for the abrasion as with perceiving the degree of the abrasion of certain machine parts to make errors. In this study we deals with the methods to check and manage periodically and to configure the judgement criteria for the state of a machine. For the applications of CDT(Condition Diagnosis Technique) we also suggest the methods to check comparing the measured vibration values with the absolute criteria and to check the abnormality by vibration level.

본 연구의 목적은 품질경영시스템의 ISO 9000:2000/KS A 9000:2001 개정 규격 내용 및 요구사항을 살펴보는 한편, 우리나라 중소기업이 전환규격을 적용하는데 있어서 ERP PACKAGE를 이용하여 효과적인 품질경영시스템 구축 방안을 제시하기 위함이다. 본 연구에서는 업무 PROCESS와 품질 기록을 중심으로 ISO 9000:2000/KS A 9000:2001 개정 규격을 ERP PACKAGE에 접목하는 방법을 도출하였으며, 적용 사례로서 기계 제조업체의 구매업무를 중심으로 품질경영시스템 구축방안을 제시하였다. 본 연구의 결과는 다음과 같다. 첫째, 정형화된 업무 체계를 갖추어 업무 담당자간 혹은 부서간의 업무 마찰을 줄이고 여러부서에서 발생하는 업부 DATA를 중앙집중식으로 공유하여 동일한 DATA의 수집과 작성에 중복성을 최소화하는 등에서 업무의 효과가 있는 것을 볼 수 있다. 둘째, ERP PACKAGE를 이용한 품질경영시스템(ISO 9000:2000/KS A 9000:2001)의 효과적인 추진 방안은 다음과 같다 1) 전환 규격의 충분한 이해가 요구된다. 2) 현재의 업무 프로세스를 파악한 후 ERP PACKAGE에서 제공하는 개선된 업무프로세스를 적용하는 것이 필요하다. 3) 개선된 업무 프로세스의 실행 결과를 ERP PACKAGE 모듈에서 품질기록으로 유지한다. 4) 새로운 품질경영 정보 시스템을 업무 전반에 적용하기 위한 기업인프라 구축과 프로세스에 대한 지속적인 개선이 요구된다. 본 연구에서는 ISO 9000:2000/KS A 9000:2001 개정 규격요구사항을 이해하고 ERP PACKAGE를 이용하여 최초로 개정규격을 적용하거나, 전환규격으로 품질경영시스템을 구축 시 좀더 효과적이고 효율적인 품질경영시스템을 구축하는데 업무지침으로 활용될 수 있을 것이다.의 수와 생존율면에서 볼 때 가장 적합한 것으로 사료되었다./TEX>개월 투여하게 되면 HDL 콜레스테롤 양이 현저히 증가하였으며, 총 콜레스테롤 양, 동맥경화지표, 중성지방, 유리지방산, 과산화지방은 현 저히 감소하였다.- 결론 - 홍삼과 진세노사이드는 사람과 흰쥐에 있어 과지혈증을 호전시켰다. 실험적으로 과지혈증을 유발시킨 흰쥐에서, 혈중 아포단백질, 지방단백질 및 프로스타글란딘 상호성을 개선시켰다.었다.xA_{2}$ synthetase 억제제인 imidazole의 효과와 유사하였다. 4. G-Re는 $1{\times}10^{-5}g/ml$ 이하의 농도에서는 효과가 없으나 $1{\times}10^{-4}g/ml$ 이상의 농도에서 농도의존적으로 유의성 있는 $PGE_{2},\;PGF_{2}{\alpha},\;TXB_{2}$의 생성억제와 함께 6-keto-$PGF_{1}{\alpha}$ 증가를 보였다. 이는 prostacyclin synthetase를 자극하는 serotonin의 효과와 같은 작용으로서 prostacyclin synthetase 억제제인 tranylcypromine에 대하여 길항효과를 보였다. 5. $TxB_{2}$생성억제 작용을 나타내는 ginsenoside들의 효과를 뒷받침하기 위하여 인삼 saponin 성분을 전처치한 patelet rich plasma에서 혈소판 응집시험 결과, ADP로 유도된 혈소판 응집반응에는 모든 인삼 saponin 성분들이 효과가 없었으나 arachidonic acid로 유도된 혈소판 응집반응에는 $G-Rb_{2}$, G-Rc, G-Re의 순으로 농도 의존적인 억제현상을 보였다. 이상의 결과와 같이 인삼 saponin 성분들은

경제 환경의 변화로 무한경쟁시대에서 생존하기 위하여 중소기업은 자체기업경쟁력을 확보해야 하는 당면과제가 대두되고 있다. 정부는 이러한 문제점을 극복하기 위해 1992년부터 품질 경영(QM: Quality Management)제도를 새로운 시대 환경에 걸맞은 대안으로 택하여 확산시켜 나가고 있다. 본 연구에서는 ISO 9000을 통하여 품질경영을 도입한 300인 이하 제조업체를 대상으로 경영자의 품질경영에 대한 관심이 품질시스템 준수에 미치는 영향을 파악하고 품질시스템의 준수정도가 품질경영 도입 전$\cdot$후에 매출액, 공정불량, 고객불량, 납기에 어떤 영향을 주는지 직접 방문하여 조사를 실시하였다. 조사결과 품질경영을 도입한 중소기업 중 경영자 관심정도에 따라 품질시스템이 준수되는 것으로 나타났으며 품질시스템을 준수하는 회사에 공정불량, 고객불만에 효과가 있었고, 납기준수는 품질시스템의 준수보다는 매출증가에 영향을 받으며, 매출 증가는 품질시스템 준수와 관계없이 대체적으로 증가한 것으로 나타났다.

A construction model of quality management system in manufacturing industry focuses on process approach and continual improvement amongst the quality management 8 principles which are elements of quality management system of ISO 9000:2000 family standards, and proposes the model that can construct quality management system throughout the process approach as more simple and effective way in developing and applying a quality management system for characteristics of the manufacturing industry.

Competitive power in manufacturing industries mainly depends on production time and qualify of products. The main issue for achieving this goal is to build high speed and super accuracy machine. The machine has been developed in the aspect of hardware. However, applications in high speed machining is not sufficient to give solutions to industries in machining. This research presents a method to improve surface roughness adopting experimental design. This research finds experimental factors which have great impact on surface roughness. From the experiments cutting conditions are found for better quality of machining.

This article explains the theory of multiple mode/physical coordinate synthesis method in order to analyze the dynamic characteristics for an huge marine engine. The theory leads to make a simulation code. The natural frequencies obtained from the simulation code is compared to those from a commercial analysis software, ANSYS. The simulation code is well reviewed.

As the transmission of 3D shape models through Internet becomes more important, the compression issue of shape models gets more critical. The issues for normal vectors have not yet been explored as much as it deserves, even though the size of the data for normal vectors can be significantly larger than its counterparts of topology and geometry. Presented in this paper is an approach to compress the normal vectors of a shape model represented in a mesh using the concept of clustering. It turns out that the proposed approach has a significant compression ratio without a serious sacrifice of the visual quality of the model.

In many applications of computer aided geometric design and computer graphics, B-spline is one of the most popular representation for curves and surfaces, and the evaluation of B-spline curves and surfaces is the most frequently used operation. For the evaluation and others, the power form representation of the curves and surfaces is preferred because it is possible to speed-up the operation using Horner's rule. In this paper, we present a new algorithm for the above-mentioned conversion focusing on a dynamic case. Experiment shows that the proposed algorithm significantly outperforms the conventional approach when one or more control points of a B-spline curve and surface are dynamically moving.

Presented in this paper is an algorithm to compute the Voronoi diagram of a circle set from the Voronoi diagram of a point set. The circles are located in Euclidean plane, the radii of the circles are non-negative and not necessarily equal, and the circles are allowed to intersect each other. The idea of the algorithm is to use the topology of the point set Voronoi diagram as a seed so that the correct topology of the circle set Voronoi diagram can be obtained through a number of edge flipping operations. Then, the geometries of the Voronoi edges of the circle set Voronoi diagram are computed. The main advantages of the proposed algorithm are in its robustness, speed, and the simplicity in its concept as well as implementation.

Reverse Engineering is to find CAD model through measured data of a physical model which is not available in CAD model. The measured data are obtained from measuring with Coordinate Measuring Machine or Laser Scanner This paper introduces efficient methods of reconstruction through the application of the Reverse Engineering using Modified B-spline approximation.

Demands of customers are being changed and varied. And in this circumstance, it become a main issue of management that the company should produce and sell products according to the customer demands. With these trends, each company has been concentrating effects on generalization of product development technique and distinction of service for customer. To fulfill these demands of customer, they need a concept of eCRM(Web based Customer Relationship Management), and go from soiling products and services, or gathering customer requests, up to the phase of solving customer's problem by real time or previous action. With the help of internet, the frequency and speed of the problem solving has improved greatly. In the Supply chain, The ATP(Available to Promise) function doesn't only give customers to conformation of delivery. It can be used by the core function with ATP rule that can reconcile supplies and demands on the supply chain. Therefore We can be acquire the conformation about on the due date of supplier by using the ATP function of management about real and concurrent access on the supply chain, also decide the affect about product availability due to forecasting or customer's orders through the ATP. In this paper, It consolidates the necessity on a ATP and analyzes data which is concerned of ATP. Under the these environments, defines the ATP rule that can improve the customer value and data flow related the eCRM and builds on a algorithm.

국내의 제조환경에 적합하고 다운사이징 및 개방형의 개발특성을 갖추고, 특히 기업내의 타 시스템인 생산관리, 품질관리, 자재 및 재고관리 등과도 연계성을 높인다. 현장의 가동상태정보를 품질정보, 생산정보와 인터페이스 하여 실시간적으로 저장, 조회, 분석할 수 있는 관리시스템을 산학연 연구를 통해 구현한다.

This paper is a report on the user requirements analysis based on the survey performed during the February and March, 2002. The survey constitutes the preliminary stage of our research on the design of advanced public transportation system(APTS) in ITS service. A random sample of 60 responses were selected from the total of 300 replies that were received for our statistical analysis. We were able to identify what kind of information content Is mostly required by the public transportation users. Some useful guidelines as to how to design the APTS are provided as the conclusion.