The purpose of this study was to classify the somatotype of elderly women and to extract discriminant factors of the classification. The subjects were 218 elderly women aged 60-85 years old. Data were collected from 46 anthropometric and photographic measurements of each subject and analyzed by frequencies, crosstabs, analysis of variance and discriminant analysis. The somatotype was classified into 5 types according to the lateral view. The normal type was defined as the type which the plumb line passes through the cervicale and the lateral malleolus. The lean-back type positioned the plumb line more posteriorly than normal type. The swayback type positioned the plumb line at about the same line as the lean-back type, but curvature of lateral view was prominent. The lean-forward type I and II positioned the plumb line more anteriorly than normal, but the spinal curvature of the type II disappeared. As the result of discriminant analysis, significant discriminant factors of anthropometric measurement were cervicale height, anterior waist height, neck point to posterior waist length, anterior waist length. Photographic measurement were C valve, D value, ∠${\alpha}$ and ∠${\beta}$.

The purpose of the present research is to determine, for a sample of female college students, the effects of body-cathexis and importance of ideal body image on satisfaction with ready-to-wear. The sample included 177 female college students aged from 18 to 25. To measure the variables, an instrument was developed based on previous studies. Body-cathexis and importance of meeting the ideal body image were measured for five areas of body parts; head/upper body, lower body, height, weight, and torso. Satisfaction with ready-to-wear includes satisfaction with the fit at pant length, thighs, hips, waist, bust, and neckline, and with the variety in ready-to-wear. Research hypotheses were tested using multiple regression. The results showed that there was a positive impact of body-cathexis for a specific body area on ready-to-wear satisfaction which is related to the body area. The effect of importance of meeting the ideal body image on ready-to-wear clothing was different in regard to different areas of body parts.

We examined the effect of individual sweating responses on thermoregulatory responses induced by heat of sorption, immediately after the onset of sweating. The present study consists of two experiments. In experiment 1, made of 100% cotton (C) and 100% polyester (P) clothing were exposed in the chamber at ambient temperature (Ta) of $27.2^{\circ}C$ and relative humidity (rh) raised from 50% to 95% at five different increase rates of environmental vapor pressure (VP). The increase rate of clothing surface temperature (Tcs), peak Tcs and peak time showed significant correlation with the increase rate of environmental VP in C-clothing (p<0.05). In experiment 2, seven female subjects were studied during leg water immersion ($35-41^{\circ}C$) for 70min in Ta of 27.2 and 50%rh. There were significant positive correlations in the increase rate of clothing microclimate VP vs. changes in Tcs, skin blood flow, mean skin temperature and mean body temperature (p<0.05). The present results showed that individual clothing microclimate VP had significant effects on thermoregulatory responses induced by heat of sorption wearing C ensembles.

The effects of individual sweating rates on thermophysiological responses during the decrease phase of clothing surface temperature (Tcs) with cotton (C) and polyester (P) clothed subjects were examined. Seven women subjects were exposed in a climatic chamber at ambient temperature of $27.2^{\circ}C$, relative humidity of 50%, and their lower-legs were immersed in a water bath at a temperature of $35-41^{\circ}C$ for 70 min. During water immersion, Tcs in C-clothed subject rose immediately after the onset of sweating and then Tcs fell gradually. In C-clothed subjects, Tcs decreased directly (p<0.05) in proportion to total sweating rate (TSR), however no significant correlation was observed in P-clothed subjects. The relationship between TSR and changes in mean skin temperature, and skin blood flow showed negative correlation when wearing C-clothing (p<0.05), however, no significant correlation when wearing P-clothing. Individual TSR was correlated with threshold rectal temperature for sweating onset (p<0.05) with C- and P-clothed subjects. The results showed that individual TSR had significant effects on not only Tcs but also on thermoregulatory responses during the Tcs decrease phase.

To be able to work safely and efficiency, the Threshold Limit Values (TLV) for work in the heat are widely used. Since these TLV are only applicable to workers in regular clothing, TLV should be adjusted when applied to the asbestos removal workers who wear extra impermeable protective clothing. Although abbreviated guidelines for heat stress exposure have been proposed, literature advocating their use in the asbestos removal industry is limited. Therefore, we planed a survey to evaluate the workload of asbestos abatement workers in summer, and an experiment with climatic chambers to evaluate the effects of resting in a cool environment between work periods. From these studies, we got following conclusions. There is a high risk of suffering from heat illness by asbestos abatement work in summer in Japan. It is proposed to create a cool room inside the workplace of asbestos abatement work to reduce thermal stress.

In this study, to find out the physiological reaction of the human body and the sensation of comfort when people are wearing sportswear which is made of waterproof breathable fabrics under general environmental conditions (temperature : $20{\pm}1^{\circ}C$, humidity : $60{\pm}5%RH$, air current : 0.1 m/sec) and rainy environmental conditions (temperature : $20{\pm}1^{\circ}C$, humidity : $60{\pm}5%RH$, air current : 0.1 m/sec, rainfall : 250 1/hr), we made an experiment with sportswear in an artificial climate chamber and studied the thermal physiological response and subjective sensation. Mean skin temperature of the subjects was low and had a big range of fluctuation in rainy environmental conditions of two condition. Temperature started to increase at the beginning of the exercise, reached the maximum at the 2nd level of the exercise and then started to decline. Rectal temperature showed a slighter increase and bigger range of fluctuation in general conditions than in rainy conditions. Except clothing micro climate in rainy conditions, temperature and humidity and their range of fluctuation around back were higher than those around chest. Humidity was high and had wide range of fluctuation in general conditions. Heart rate was 4.4 beats/min higher in general conditions. In subjective test on rainy conditions, the feeling of discomfort increased due to the raindrops fallen on the skin. Unlike that in general conditions, cold sensation increased and humidity sensation reached to the peak after the exercise. In wearing sportswear made of shape memory breathable waterproof fabric, controlling function over a small amount of heat and water was distinctive while it turned out to be not so comfortable over a large amount of heat and water. Through this, the limitation of shape memory breathable waterproof fabric was recognised.

This study was conducted to find out the relationship between skin temperature and clothing temperature in body parts. Four different kinds of fabrics were used in this experiment. These fabrics were a (Ny/Spun, 81.8/18.2%), b (Wool/Poly/span, 50/45/5%), (Wool/Ny/Span70/25/5) and d (Wool/Poly/Span 45/45/10%). The subjects skated at indoor ice rink where the length was 111.12 m, the temperature was $11{\pm}1^{\circ}C$ and the humidity was $70{\pm}10%$. The four an male professional skaters speed was $17{\pm}1$ seclm/lap. Physiological parameters were skin temperature at 4 body points (chest, upper arm, thigh, leg) and clothing temperature at chest was measured every 15 second. Experiment protocol was as follows: resting before skating (5 min.), skating (5 min.), and resting after skating (10 min.). The results were as follows; The mean skin temperature by fabrics shows b > a > d > c. The mean skin temperature began to decline little by little as soon as the subjects entered the indoor ice rink. After they rested for five minutes, they started skating and the mean skin temperature declined widely. After skating, the mean skin temperature increased step by step. It maintained the similar temperature. The value of skin temperature at body points shows Leg > Chest > Upper arm > Thigh. Because of the characteristics of skating uniforms, the skin temperature of the leg is the highest. The skating uniform was designed to have a protective portion in the leg. The chest produces the highest temperature in the body. The comparison of difference values in skin temperature show Thigh > Upper arm > Chest > Leg. While skating in a cold atmosphere, the largest difference value is clothing temperature. The clothing temperature is lower than the skin temperature during skating. The difference value of clothing temperature is larger than the skin temperature of the chest.

The purpose of the study was to obtain the basic data on the self-adjusting ability of the support panty stockings. Ten healthy women in the twenties were selected as subjects and clothing pressure of 9 support panty stockings made of single covered yarn (SCY) and double covered yarn (DCY) were measured under the standard environmental condition for the study. Data was analysed statistically according to body postures, sides, and parks. The results were as follows: Clothing pressure according to body posture was order of 'sitting-on-a-chair', 'stepping-up-a-stair', and 'standing'. High clothing pressure was obtained in the parts of calf ($9.4gf/cm^2$) in 'standing' and knee (9.7 and $16.5gf/cm^2$) in both 'stepping-up-a-stair' and 'sitting-on-a-chair', respectively. The order of clothing pressure with body sides was 'front', 'side', and 'back'. The highest clothing pressure was knee ($18.8gf/cm^2$) on the front, thigh ($8.8gf/cm^2$) on the side, and calf ($6.4gf/cm^2$) on the back. Clothing pressure of DCY at abdomen and knee was a little higher than those of SCY 3. In terms of material structure variation, clothing pressure of thigh, calf and ankle with SCY was a little higher than those with DCY, while clothing pressure of abdomen and knee with DCY was a little higher than those with SCY.

In this paper, in order to examine the torsional behaviour of twisted yarn closely, the torsional rigidity would be derived in terms of physical and mechanical characteristics of its constituent fibers and yarn structural parameters by energy-method. And the propriety of the theory will be discussed by comparing with experimental results. The torsional rigidity of yarn in both experimental and theoretical results decreases with surface helix angle increases. But the experimental values are more higher than those of the theoretical ones.

An investigation of the relative velocity of friction surface for the newly developed cone drum twister texturing mechanism is reported. The cone drum twister is one of the outer surface contacting friction-twisting devices in false-twist texturing. In this cone drum twister, a filament yam passes over the surface of the cone drum that rotates by passing the yarn without a special driving device. This research is theoretically composed of the analysis of the false twisting mechanism. The equations were derived by using the conical angle of the cone drum, projected wrapping angle, and yarn helix angle. Theoretical values of the relative velocity of friction surface were calculated and discussed. It is shown that, as the projected wrapping angle increased, the relative velocity of friction surface decreased. But as the conical angle increased the relative velocity of friction surface also increased.