In order to secure reliable values of measurement of the data about children's longitudinal develop- ment and physique examination and their growth states for 6 years from first grade through sixth grade in elementary school was collected based on their school health records. A sample physique group and general physique group were investigated and compared classified into girls and boys. The results are as follows; (1) Whe the difference of physiques in the sample group and general group is compared, boys and girls show little difference in height but boys differ greatly in weight and sitting-height but girls do in weight, girth of chest and sitting-height between 8 and 11 years old. (2) In the verification of the two groups; the body height in 7 years old show a significant difference at the P<0.5 level and their weights do at 7.8 and 11 years old. Girls' sitting-height at 11 years old shows a significant difference at the P<0.5 level. In the light of the above results because possibility of instrumental error in measurement is high between the two groups and also in case of the comparison of past sample data, the physique examination used in every school seems to be in need of reconsideration to reduce errors in measurement.

The purpose of this study was to find the optimal stroke width-to-height ratio of the Korean character (Hangeul) which yields the greatest reading distance. In this study, black characters on a white background were used under 200 lux conditions in-doors, with the stroke width-to-height ratios ranging from a very thin 1:125 to heavier 1: 8.3. The criterion was the average reading distance at which three subjects (male university students) having normal visual acuity (1.2) could read the characters. Using the data obtained from the experi- ment, we analyzed the relationship between stroke width-to-height ratio and reading distance. In the case of the black characters on a white background, the greatest reading distances occurred with a range from 1:11.4 to 1:17.9.

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment, then the mode changes into the manual mode. The operation by program and the operation by hyman recover the error in the manual mode. The system resumew the automatic mode and continues the given task. In order to utilize the inverse kinematics as means of the operation by program in the manual mode, Lee and Nagamachi determined the end point of the robot trajectory planning which varied with the height of the task object recognized by a T.V monitor, solved the end point by the fuzzy set theory, and controlled the position of the robot hand by the inverse kinematics and the posture of the robot hand by the operation by human. But the operation by human did take a lot of task time because the position and the posture of the robot hand were separately controlled. To reduce the task time by human, this paper developes an error recovery expert system (ERES). The position of the robot hand is controlled by the inverse kinematics of the cartesian coordinate system to the end point which is deter- mined by the fuzzy set theory. The posture of the robot hand is controlled by the modulality of the robot hand's motion which is made by the posture of the task object. The knowledge base and the inference engine of the ERES is developed using the muLISP-86 language. The experimental results show that the average task time by human the ERES which was performed by the integration of the position and the posture control of the robot hand is shorter than that of the research, done by the preliminary experiment, which was performed by the separation of the position and the posture control of the robot hand. A further study is likely to research into an even more intelligent robot system control usint a superimposed display and digitizer which can present two-dimensional coordinate of the work space for the convenience of human interaction.

This paper discusses the gereral principles to be considered in the design of usef interfaces of graphics packages and presents a top-down design process in systematic way. The effective and convenient user interfaces are analyzed based on human factors criteria and we discuss the properties and application requirements of typical interaction techniques which support primitive tasks. The choice of an interaction technique has a set of input device prerequisites to be met.

봉제산업의 꽃이라 불리울 만큼 비중을 크게 차지하는 미싱사들의 신발 설계는 미싱 작업동작에서 나타나는 인간요소의 특성에 적합하도록 최적화되어야 한다. 현재 미싱사들이 착화하고 있는 신발설계구조는 미싱 작업동작 특성으로 나타나는 제 요인을 고려하지 아니한 신발로서 작업능률을 저하시키고 있는 실태이다. 본 연구에서는 설계조건에 따라 다르게 나 타나는 요인의 변수를 인간공학적인 방법으로 조사연구하여 미싱 작업동작에 원활을 기할수 있는 생체원칙에 따라 동적작업과는 다르게 생체내의 6수분과 혈액이 발부위로 몰려 발의 체 적이 팽대해지고 미싱 동작을 시작하여 약10분이 경과되면 생리적 이상으로 1$cm^{2}$당 18 개의 봉제화의 설계시방 기초를 마련하는데 목적이 있다.