Objective: The purpose of this study was to investigate the job stress factors of mobile communication network construction workers using survey based on 'Job stress factors evaluation tool for Koreans' that was developed by KOSHA in 2003. Background: Due to the rapid growth of penetration rate of smartphone, the necessity of LTE service changing from 3G network was brought up. The demand of LTE network construction in a short period of time leads to the aggravation of the job stress of mobile communication network construction workers. Method: Two hundred and fifty workers who were in the mobile communication network industry participated in this study, and among them 206 responses were analyzed for this study due to the unreliability and insincerity of responses. The eight job stress factors which are physical environment, job demand, job autonomy, relation conflict, job instability, organizational system, inadequate compensation, workplace culture were analyzed. Results: The job stress factors of mobile communication network construction workers were compared to those of other industry workers, and other work related characteristics were analyzed. The results showed that the stress level of a physical environment and job requirement were relatively higher than those of manufacturing industry workers, meaning that mobile communication network construction workers have rough working conditions and increased amount of work due to the demand of LTE network construction. The stress level of physical environment for outdoor job workers was relatively higher than that of indoor job workers. With the analytical result for level of job satisfaction, significant difference was observed (p <0.05) with every factor, and the job stress was found the highest with those not satisfied with every factor Conclusion: From the results of this study, the work loss due to the job stress could be prevented, and accurate stress factors could be removed at the workplace. Application: The results of this study may not represent the whole mobile network construction workers, the effort for job stress management is needed to improve the work efficiency and the workers' quality of life.

Objective: This study was conducted to investigate the potential of sematic network analysis for design research. Background: As HCD (Human-Centered Design) was emphasized, lots of design research methodologies were developed and used in order to find user needs. However, it is still difficult to discover users' latent needs. This study suggests the semantic network analysis as a complementary means for design research, and proved its potential through the practical application, which compares multi-screen purchase and usage behaviors between America and China. Method: We conducted an in-depth interview with 32 consumers from USA and China, and analyzed interview texts through semantic network analysis. Cross cultural differences in purchase and usage behaviors were investigated, based on measuring centrality and community modularity of devices, functions, key buying factors and brands. Results: Americans use more services and functions in the multi-screen environment, compared to Chinese. As a device substitutes other devices, traditional boundaries of the devices are disappearing in the USA. Americans consider function to recall Apple, but Chinese consider function, design and brand to recall Apple, Sony and Samsung as an important brand at the time of their purchase. Conclusion: This study shows the potential of semantic network analysis for design research through the practical application. Semantic network analysis presents how the concepts regarding a theme are structured in the cognitive map of users with visual images and quantitative data. Therefore, it can complement the qualitative analysis of the existing design research. Application: As the design environment becomes more and more complicated like multi-screen environment, semantic network analysis, which is able to provide design insights in the intuitive and holistic perspective, will be acknowledged as an effective tool for further design research.

Objective: The purpose of this study was to determine the reliability of lower limb joint angles computed with the software ImageJ during jumping movements. Background: Kinematics is the study of bodies in motion without regard to the forces or torques that may produce the motion. The most common method for collecting motion data uses an imaging and motion-caption system to record the 2D or 3D coordinates of markers attached to a moving object, followed by manual or automatic digitizing software. Above all, passive optical motion capture systems (e.g. Vicon system) have been regarded as the gold standards for collecting motion data. On the other hand, ImageJ is used widely for an image analysis as free software, and can collect the 2D coordinates of markers. Although much research has been carried out into the utilizations of the ImageJ software, little is known about their reliability. Method: Seven healthy female students participated as the subject in this study. Seventeen reflective markers were attached on the right and left lower limbs to measure two and three-dimensional joint angular motions. Jump performance was recorded by ten-vicon camera systems (250Hz) and one digital video camera (240Hz). The joint angles of the ankle and knee joints were calculated using 2D (ImageJ) and 3D (Vicon-MX) motion data, respectively. Results: Pearson's correlation coefficients between the two methods were calculated, and significance tests were conducted (${\alpha}=1%$). Correlation coefficients between the two were over 0.98. In Vicon-MX and ImageJ, there is no systematic error by examination of the validity using the Bland-Altman method, and all data are in the 95% limits of agreement. Conclusion: In this study, correlation coefficients are generally high, and the regression line is near the identical line. Therefore, it is considered that motion analysis using ImageJ is a useful tool for evaluation of human movements in various research areas. Application: This result can be utilized as a practical tool to analyze human performance in various fields.

Objective: The purpose of this study is to identify the effects of sign language video location in e-learning system for the hearing-impaired. Background: E-learning education is a good way to resolve the inequality of education for the disabled. Providing a sign language video in e-learning education for the hearing-impaired is very important for their learning. Although the location of sign language video is an important factor in the design of the video, the effect of its location in learning using the e-learning system was not studied. Method: In order to identify the effect of sign language video location on the learning of the hearing-impaired using the e-learning system, the prototypes of the system with different locations were developed. Eighteen people with hearing impairment participated in this experiment. Learning presence, learning immersion, and learning satisfaction were used to measure learning effects with sign language video location. Results: Bottom right position was more preferred through preference evaluation for sign language video location. The learning effect with sign language video location (bottom-left and bottom-right) was not significant. That is, the effects of learning presence, immersion, and satisfaction were not statistically significant with video location. Conclusion: From this study, the following have to be considered in e-learning system design for the hearing-impaired. Although the location of a sign language video is not a significant factor from the experiment, the bottom right position in the design is proposed because learning presence and satisfaction is slightly higher at the bottom right position, and the position is preferred from subjective evaluation. From the analysis of interview data, it was also proposed that the design of a sign language video should be improved for the hearing-impaired. Application: The result of this study can be applied to the e-learning system design for the hearing-impaired.

Objective: This study aims to investigate the correlation between office and work environment satisfaction levels and workers' musculoskeletal symptoms by conducting surveys asking office workers to state their musculoskeletal symptoms and office and work environment satisfaction levels. Background: The increased number of office workers and their indoor work hours using computers have led to new understandings of the importance of office environment including its temperature, humidity, noise levels, lighting and quality of air, and work environment including monitor arrangement, space arrangement and the functions of desks and chairs. Method: Specific details on office work, office environment satisfaction levels, work environment satisfaction levels, musculoskeletal symptoms, absence from work and treatment due to musculoskeletal related symptoms were analyzed based on the survey answers given by 397 office workers who were the subjects of this research. Results: Office workers showed different characteristics of musculoskeletal symptoms depending on their gender, age, work experience, office hours, break time and time spent on computers. Also, differences in symptoms were found for workers'with different satisfaction levels for office environment (temperature, humidity, noise levels, quality of air, lighting) and work environment (location of monitors, area and display of office space, chairs and desks). ANOVA shows the differences between groups of subjects classified by the experience of work-absences and treatments or pain complaints. Conclusion and Application: Relationship between workers' satisfaction levels with the office and work environment and their musculoskeletal symptoms is expected to be served as essential data for systematic management of the workplace.