Objective: The present study is intended to develop an improved bus seat armrest design by evaluating various bus armrest designs from ergonomic aspects. Background: An ergonomic armrest design which considers the sitting postures and body shapes of passengers can improve the convenience and comfort of a bus seat. Method: Subjective satisfaction of each of five design dimensions (length, width, height from seatpan, shape, and angle) was evaluated for seven bus seat armrest designs in various sizes and shapes by 58 participants (28 males and 33 females) using a 7-point scale (1: very dissatisfied, 4: neutral, and 7: very satisfied). Improved bus seat armrest designs adjustable in length and rotatable to the left or right (sliding and rotating armrest, SRA) with a concave, flat, or convex shape of the upper part were developed by considering the preferred design features and the body size and shape in sitting posture and needs of passengers and then compared with a conventional armrest. Results: A bus seat armrest with a wide width (40~50mm), a long length (360mm), a lower height (213mm), and a curved shape was found significantly preferred in terms of comfort. The proposed armrest designs (SRA-convex, SRA-flat, and SRA-concave) improved satisfaction by 46~62% for length suitability, 184~216% for width suitability, 205~214% for angle suitability, 138~181% for contact area suitability, and 49~64% for height suitability, 138~174% for comfort, and 93~111% for overall satisfaction. Conclusion: The preferred design features and passengers' needs of bus seat armrest were identified and the SRA designs were recommended for better usability. Application: The ergonomic design process of bus seat armrest employed in the present study can be applied to designing armrests in various vehicles for better convenience and comfort.

Objective: The purpose of this study was to precede the acceptance study based on automation steps and user experience that was lacked in the past study on the core technology of autonomous vehicle, ADAS. The first objective was to construct the acceptance model of ADAS technology that is the core technology, and draw factors that affect behavioral intention through user experience-based evaluation by applying driving simulator. The second one was to see the change of factors on automation step of autonomous vehicle through the UX/UA score. Background: The number of vehicles with the introduction of ADAS is increasing, and it caused change of interaction between vehicle and driver as automation is being developed on the particular drive factor. For this reason, it is becoming important to study the technology acceptance on how driver can actively accept giving up some parts of automated drive operation and handing over the authority to vehicle. Method: We organized the study model and items through literature investigation and the scenario according to the 4 stages of automation of autonomous vehicle, and preceded acceptance assessment using driving simulator. Total 68 men and woman were participated in this experiment. Results: We drew results of Performance Expectancy (PE), Social Influence (SI), Perceived Safety (PS), Anxiety (AX), Trust (T) and Affective Satisfaction (AS) as the factors that affect Behavioral Intention (BI). Also the drawn factors shows that UX/UA score has a significant difference statistically according to the automation steps of autonomous vehicle, and UX/UA tends to move up until the stage 2 of automation, and at stage 3 it goes down to the lowest level, and it increases a little or stays steady at stage 4. Conclusion and Application: First, we presented the acceptance model of ADAS that is the core technology of autonomous vehicle, and it could be the basis of the future acceptance study of the ADAS technology as it verifies through user experience-based assessment using driving simulator. Second, it could be helpful to the appropriate ADAS development in the future as drawing the change of factors and predicting the acceptance level according to the automation stages of autonomous vehicle through UX/UA score, and it could also grasp and avoid the problem that affect the acceptance level. It is possible to use these study results as tools to test validity of function before ADAS offering company launches the products. Also it will help to prevent the problems that could be caused when applying the autonomous vehicle technology, and to establish technology that is easily acceptable for drivers, so it will improve safety and convenience of drivers.

Objective: This study aims to find suitable types and styles for gesture interaction as remote control on smart TVs. Background: Smart TV is being developed rapidly in the world, and gesture interaction has a wide range of research areas, especially based on vision techniques. However, most studies are focused on the gesture recognition technology. Also, not many previous studies of gestures types and styles on smart TVs were carried out. Therefore, it is necessary to check what users prefer in terms of gesture types and styles for each operation command. Method: We conducted an experiment to extract the target user manipulation commands required for smart TVs and select the corresponding gestures. To do this, we looked at gesture styles people use for every operation command, and checked whether there are any gesture styles they prefer over others. Through these results, this study was carried out with a process selecting smart TV operation commands and gestures. Results: Eighteen TV commands have been used in this study. With agreement level as a basis, we compared the six types of gestures and five styles of gestures for each command. As for gesture type, participants generally preferred a gesture of Path-Moving type. In the case of Pan and Scroll commands, the highest agreement level (1.00) of 18 commands was shown. As for gesture styles, the participants preferred a manipulative style in 11 commands (Next, Previous, Volume up, Volume down, Play, Stop, Zoom in, Zoom out, Pan, Rotate, Scroll). Conclusion: By conducting an analysis on user-preferred gestures, nine gesture commands are proposed for gesture control on smart TVs. Most participants preferred Path-Moving type and Manipulative style gestures based on the actual operations. Application: The results can be applied to a more advanced form of the gestures in the 3D environment, such as a study on VR. The method used in this study will be utilized in various domains.

Objective: The objective of this study is to evaluate affection on how users perceive colors viewed from an automotive visual display according to cultural and radical differences including North America, Europe, and Southeast Asia. This study especially aims to identify effects of the variation of tone and chroma of representative color groups by analyzing affection differences depending on cultural and racial differences targeting the colors constituted through variation of tone and chroma, centered on representative colors. Background: The colors of the menu, information display or background viewed through an automotive visual display are an important factor stimulating consumer's affection, and therefore an effort to express the vehicle's brand and product image through colors is made. The studies on colors focus only on the research on unique characteristics of colors, but an affective approach lacks according to cultural and racial differences on colors considering tone and chroma variation within a color from the currently used automotive visual displays. Method: To grasp the visual affection felt by users, this study extracted affective adjectives related with colors through existing literature and a dictionary for adjectives, and presented human affection dimensions on colors through evaluation of various colors. Prior to carrying out affection evaluation, the basic light sources, red (R), green (G), and blue (B) constituting the colors used for automotive visual displays were defined as a representative color group, respectively. When colors in a color group are constituted, the evaluation target of each color group consisted of the colors considering the variation of tone and chroma by changing color sense through RGB values of the remaining two light sources. And then, this study carried out affection evaluation on the constituted colors targeting the subjects with cultural and racial differences. Results: As a result of evaluating the constituted colors with representative affections, there were statistically significant differences between the groups having cultural and racial differences. As a result of S-N-K post-hoc analysis on the colors showing significant differences, North America and Europe were classified as heterogeneous groups. In some cases, Korea was classified as the homogeneous group with North America, but Korea was mainly classified as the homogenous group with Europe. Conclusion: The representative affections on colors from an automotive visual display was drawn as three affective dimensions: passionate, neat, and masculine. Based on these, the affection of Korea and Europe on the constituted colors showed significant differences from that of North America, as a result of affection evaluation on the constituted colors viewed through the visual display by reflecting cultural and racial factors. Regarding representative color groups, bigger cultural and racial differences were revealed in terms of affection on red and green colors than on blue color, and variation of affection was the biggest in the red color. Application: This study analyzed correlations of affection considering the colors constituted through variation of tone and chroma, and the culture and race in the representative color groups constituting a visual display. The results of this study are predicted to be utilized in coordination and selection of colors viewed from an automotive visual display taking into account culture and race.

Objective: This study aims to compare the usability of the adaptive touch design method with that of the height adjustable design method that are applied to the Korean QWERTY keyboard and Naratgul keyboard on smartphones, examine the results, and present practical implications. Background: Smartphone manufacturers have failed to satisfy every user with their uniform touch keyboard designs that do not consider the high use rates of keypad use. In reality, touch keyboard designing customized for every individual is impossible, but there need to be researches on was to improve usability by having touch areas changed automatically depending on user behaviors or having users adjust the keyboard height depending on their hand size. Method: As for the design methods, an object group was given smartphones with the adaptive touch design method and the other group those with the height adjustable design method. As they entered the same characters in the smartphones, typing error rates and text input speed were measured and the average values were compared. 35 individuals who would frequently use smartphones in daily life participated in the experiment. The group variable was the type of touch keyboards, and the test variables were typing error rates and text input speed, for which a T-test was implemented. Results: As for the QWERTY keyboard, the significant improvement effect was verified as the typing error rate of the adaptive touch design method was 4.21% but that of the height adjustable design method was 3.28% although there was no significant difference in terms of text input speed. As for the Naratgul keyboard, in contrast, the typing error rate of the adaptive touch design method was 2.5% while that of the height adjustable design method was 1.48%, which indicates a measure of improvement, but the effect was not significant. On the other hand, the text input speed per minute was improved as much as 22.2%, which is significant. Conclusion: First, the Korean touch keyboard usability of the adaptive touch design method and that of the height adjustable design method, when applied to Model A of Company L, showed significant difference from each other. Second, the height adjustable design method was applied to the QWERTY keyboard, the typing error rate was improved significantly. This indicates that as the keyboard height was raised, the number of buttons within the range of fingering decreased, decreasing the touch bias was reduced. Third, the height adjustable design method was applied to the Naratgul keyboard, the text input speed was improved. Application: When the QWERTY keyboard was applied to a smartphone as small as 5.5inch or less, it is highly probably that the height adjustable design method decreases the typing error rate. It may be considered to develop additional UX functions to make the keyboard font larger or give users the option to adjust button intervals in utilization of the SW advantages of the height adjustable design method.

Objective: This study aims to understand the motorcycle accident characteristics of food delivery workers and to present basic guidelines on accident prevention through accident. Background: It is known that food delivery workers have a high ratio of self-employed and youth workers, and occupations with frequent disasters. Therefore the occupation is known to really be in need of accident prevention policy. Method: This study analyzed the data of motorcycle crashes of 1,310 food delivery workers that have been approved as on-duty industrial crashes since 2015. The accident characteristics were examined by dividing them into driver related factors and accident related factors. Results: Among the motorcycle crashes of food delivery workers, 99.2% of the victims were males, 82.6% had less than six months of work experience. 76.2% of the victims were employed by the companies with less than five workers. In addition, there was a difference in accident characteristics according to age, type of cuisine, accident time of the day, injured organs and injured body part. Conclusion: The results of this study can be used as baseline data to devise systematic measures to prevent motorcycle crashes of food delivery workers. Application: Preventative measures for novice young part time workers including safety education/training need to be established.