• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.566-571
• /
• 2014

Channel-stacked 3D NAND flash memory is very promising candidate for the next-generation NAND flash memory. However, there is an inherent issue on cell size variation between stacked channels due to the declined etch slope. In this paper, the effect of the cell variation on the incremental step pulse programming (ISPP) characteristics is studied with 3D TCAD simulation. The ISPP slope degradation of elliptical channel is investigated. To solve that problem, a new programming method is proposed, and we can alleviate the $V_T$ variation among cells and reduce the total programming time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.91-97
• /
• 2008

In this paper, we propose a channel estimation method associated with the interpolation order for OFDM systems. We first analyze the time varying channel and frequency selective channels, and then derive the channel index which indicates the ratio of the time axis variation and the frequency axis variation. This index is used for determining the order of interpolation such as time axis followed by frequency axis interpolation or vice versa. The computer simulation over a DVB-T system shows that the proposed method can provide more accurate channel information, thereby improving the overall performance.

• Electrical & Electronic Materials
• /
• v.9 no.8
• /
• pp.799-805
• /
• 1996

In short channel MOSFET, it is very important to establish optimal process conditions because of variation of device characteristics due to the process parameters. In this paper, we used process simulator and device characteristics caused by process parameter variation. From this simulation, it has been ' derived to the dependence relations between process parameters and device characteristics. The experimental result of fabricated short channel device according to the optimal process parameters demonstrate good device characteristics.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.86-95
• /
• 1986

A study on film water flow on steep open channel has been seldom found up to date. Therefore, this paper dealed with the depth variation of film thickness of water (city supply normal water) flowing on steep open channel. For this purpose, Experimental apparatus (made of a normal glass with 160cm of length and 15cm of width) was made and the depths of the water flowing on the channel were measured experimentally, changing the channel slope angle from 30 to 80 degree (5 steps) and the flow rate from 0.25 to 10CPM (11 steps). The results obtained, some characteristics of the film flow on the channel are as follows. (1) When thin film water flowed on steep open channel, the depths of flow tended to increase after decreasing and was kept nearly constant in its downstream in case of laminar and transitional flow region. The turining point of the depths of flow from decrease to increase tended to move downward with the increase of Reynolds number. In turbulent flow region, the depths of flow showed reapid decrease in its upper stream, gradual decrease in its midstream and were kept nearly constant in its downstream. (2) While the differences between the depths of flow along the channel slope got small in its upper stream and got large in its downstream in case of laminar flow region, they got very large in its upper stream and were kept nearly constant in its downstream in case of transitional and turbulent flow region. And the move flow rate increases, the more the differences between the depths of flow along the channel slope got large in its upper stream.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2A
• /
• pp.99-108
• /
• 2002

In this paper, we discuss the effect of imperfect knowledge of the transmission channel on the M-QAM SER performance of space-time block codes. Because the channel knowledge is used for decoding of space-time block codes, the imperfect channel knowledge can degrade the performance of space-time block codes. In this paper, the channel mismatch error is modeled as errors in the estimation of the channel due to noise and errors due to the variation of the channel. We derive the analytic expression for the symbol error rate (SER) as a function of the average signal to interference ratio (SIR) per channel including the terms of channel mismatch errors. Simulation results show that the acceptable levels of channel estimation error is 10$\^$-3/ and that of channel variation is f$\_$d/T$\_$B/=0.001 at SNR=20dB in space-time block codes.

• Journal of Korean Society of Forest Science
• /
• v.84 no.3
• /
• pp.369-376
• /
• 1995

Black and White aerial photogrphs are much useful to obtain the information on the channel-bed fluctuation in the following aspects. 1. In the decision of river width, the linear regression formula between the value of aerial photograph interpretation and that of field surveying is Y=1.0+0.94X(the decision coefficient is $r^2=0.98$). Therefore, aerial photographs are proved effective for the measurement of river width. 2. Aerial photograph interpretation makes it possible to classify the plane channel and the deposits in river, and suggests the situation of the plane distribution of deposits, the size of channel and the course of channel formation. 3. The periodical channel situation can be figured out through the interpretation of aerial photographs pictured in different times. Also, the comparing and analyzing each interpretated information can be able to guess the course of the variation of channel influencing powerfully channel - bed fluctuation. 4. The microtopographic map of river can be made through the decision of river with, the interpretation of the plane shape of channel - bed and the analysis of variation of channel. On the basis of this map, the plane analysis of deposit is possible.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.71-76
• /
• 2013

AlGaN/GaN HEMTs (High electron mobility transistors) with narrow channel were fabricated and the effect of channel scaling on the device were investigated. The devices were fabricated using e-beam lithography to have same channel length of $1{\mu}m$ and various channel width from 0.5 to $9{\mu}m$. The sheet resistance of the channel was increased corresponding to the decrease of channel width and the increase was larger at the width of sub-${\mu}m$. The threshold voltage of the HEMT with $1.6{\mu}m$ and $9{\mu}m$ channel width was -2.85 V. The transistor showed a variation of 50 mV at the width of $0.9{\mu}m$ and the variation 350 mV at $0.5{\mu}m$. The transconductance of 250 mS/mm was decreased to 150 mS/mm corresponding to the decrease of channel width. Also, the gate leakage current of the HEMT decreased with channel width. But the degree of was reduced at the width of sub-${\mu}m$. It was thought that the variation of the electrical characteristics of the HEMT corresponding to the channel width came from the reduced Piezoelectric field of the AlGaN/GaN structure by the strain relief.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.5
• /
• pp.391-404
• /
• 2009

A small hydropower plant(SHP) using cooling water discharged from the power plant was constructed in Samcheonpo. This study presents predicted and measured hydrological data in the construction process of small hydropower plant in order to evaluate characteristics of water level variation of cooling water discharge channel which is a key factor in the design of SHP since the water level rise of channel is related to impact on circulating water system of the existing power plant. Various methods were applied for prediction of water level variation in the design stage from simple empirical formula to sophisticated 3-dimensional CFD method. Measured results reveal that mean value was similar between measured and predicted, but measured results were larger than predicted in deviation. Moreover, simple formula, i.e. standard weir equation and Honma equation, were more useful before installation of SHP, but sophisticated methods during operation of SHP.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.3
• /
• pp.279-284
• /
• 2014

This paper proposes a novel OLED pixel circuit to compensate the threshold voltage variation of p-channel low temperature polycrystalline silicon thin-film transistors (LTPS TFTs). The proposed 5-TFT OLED pixel circuit consists of 4 switching TFTs, 1 OLED driving TFT and 1 capacitor. One frame of the proposed pixel circuit is divided into initialization period, threshold voltage sensing and data programming period, data holding period and emission period. SmartSpice simulation results show that the maximum error rate of OLED current is -4.06% when the threshold voltage of driving TFT varies by ${\pm}0.25V$ and that of OLED current is 9.74% when the threshold voltage of driving TFT varies by ${\pm}0.50V$. Thus, the proposed 5T1C pixel circuit can realize uniform OLED current with high immunity to the threshold voltage variation of p-channel poly-Si TFT.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.191-199
• /
• 2002

In this study, water protection reservoir is selected as the target which is located at the estuary of Taehwa river to analyze and examine the effects of hydraulic structure on river environment. This study aims at the definition of factors which cause the change of ecological environment of river due to the effects of the sediment protection reservoir, and the proposal of the direction of environmental friendly river space development through the analysis and examination of stream variation conditions and riverbed variation characteristics among many effects of hydraulic structure on river environment before and after removal of the sediment protection reservoir when design flow is yielded. Firstly, in case of removal the existing sediment protection reservoir, the hydraulic variation characteristics like depth drop due to removal of the sediment protection reservoir are thought of little because it is examined that depths drop with about 0.01m and 0.01~0.56m when low flow is yielded and design flood yielded, respectively. Nextly, as the examination result of the variation characteristics of flow velocity in case of removal the existing sediment protection reservoir, it is thought that the concern about riverbed erosion is not serious according to the analyzed result as the mean velocity of the channel section where the velocity varies in case of removal the sediment protection reservoir is about 0.07~1.36m/s when low flow is yielded, and is about 1.02~2.41m/s when design flood is yielded despite riverbed erosion is concerned as it is examined that flow velocity is getting increase as about 0.01m/s when low flow is yielded and about 0.01~0.44m/s when design flood is yielded. Lastly, from the prediction result of riverbed variation for each flow amount condition before and after removal the sediment protection reservoir, it is known that the variation range of riverbed is nearly constant when flow amount of the channel exceeds a specific limit as it is analyzed that the more flow amount, the more erosion and sediment in the channel section of down stream part of the sediment protection reservoir and the sediment protection reservoir~Samho-gyo, and the variation ranges according to flow amount between flood condition and design flood condition have little difference in the channel section of the upstream of Samho-gyo.