• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.585-592
• /
• 2000

Primary purpose of the system developed in this study is 3-D seismic data processing system for subsurface structure imaging and this system is developed in PC based on Linux for lower-cost computer. Basic data processing modules are originated from SU (Seismic Unix) which is widely used in 2-D seismic data processing and auxilious modules are developed for 3-D data processing. The system which is constructed by using these data processing modules is designed to GUI (Graphic User Interface) in order that one can easily control and for this purpose, GTK (Gimp Tool KiT) conventionally adapted in producing Linux application.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.449-454
• /
• 2003

The accurate mapping of the basement is one of the most crucial factors in construction of harbour facilities and bridges in the coastal areas. In shallow waters, the seismic reflection method often fails to image the basement geometry beneath the sediment cover in many cases. We present the result of a shallow marine seismic refraction survey using two ships, l2-channel hydrophone arrays deployed on the bottom and a borehole sparker or percussion powder as sources. Velocity structure could be computed by tomography algorithm since more than 6 different source points had been applied for one spread. The comparison of the results of the refraction survey with drilling logs demonstrates remarkable consistency in basement geometry. It thus appears that the refraction method in this study is an efficient and cost-effective way to investigate the basement structure in coastal area, river, and lake.

• Economic and Environmental Geology
• /
• v.32 no.2
• /
• pp.161-167
• /
• 1999

Electric and electromagnetic surveys were conducted to investigate the deep structure of the Ulsan fault in Ipsil area, south of Kyeongju. On this study, especially high-frequency magnetotelluric method of electromagnetic survey in the frequency range of 10~100,000 Hz was mainly employed to study the deep subsurface configuration. High-frequency MT survey was performed at 70 points of spacing 30~50 m, making 3.8 km survey line. As a survey result, a 2-km-depth 2-D cross-section was achieved. It shows vertical and horizontal subsurface variations of resistivity values. Near-surface layer having low resistivity value becomes thicker eastward up to 800m. There is a steep low resistivity zone in the west side of survey line, and there exists two low resistivity zones dipping west in the east side of survey line. Two low resistivity zones are interpreted to be related to major movement pattern of the Ulsan fault. This suggests that major fault lines are developed on both peripheral sides of the broad fault zone.

• Economic and Environmental Geology
• /
• v.33 no.6
• /
• pp.525-536
• /
• 2000

Electromagnetic and electric surveys were performed to reveal the deep structure of the Yangsan fault in the Bong-gye and Unyang areas, Kyeongnam Province, Korea. Especially, high-frequency magnetotelluric (HFMT) method of EM survey was mainly employed to study the deep subsurface configuration of Yangsan fault. HFMT survey was performed at 25 points of spacing 50 m, making 1.3 km survey line in Unyang area and 13 points of spacing 50 m, making 0.6 km survey line in Bong-gye area. Two 2-D cross-sections (Unyang and Bong-gye areas) were achieved as results. Electric survey by dipole-dipole array was performed to study the structure of shallow subsurface and compare the results with HFMT surveys. The results of HFMT and electric surveys show that Yangsan fault is a geologic boundary. It is very narrow and steep (about $80^{\circ}C$), and extends to 1~1.5 km depth.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.117-122
• /
• 2006

In the geophysical monitoring to understand the change of subsurface material properties with time, the time-invariant static subsurface model is commonly adopted to reconstruct a time-lapse image. This assumption of static model, however, can be invalid particularly when fluid migrates very quickly in highly permeable medium in the brine injection experiment. In such case, the resultant subsurface images may be severely distorted. In order to alleviate this problem, we develop a new least-squares inversion algorithm under the assumption that the subsurface model will change continuously in time. Instead of sampling a time-space model into numerous space models with a regular time interval, a few reference models in space domain at different times pre-selected are used to describe the subsurface structure continuously changing in time; the material property at a certain space coordinate are assumed to change linearly in time. Consequently, finding a space-time model can be simplified into obtaining several reference space models. In order to stabilize iterative inversion and to calculate meaningful subsurface images varying with time, the regularization along time axis is introduced assuming that the subsurface model will not change significantly during the data acquisition. The performance of the proposed algorithm is demonstrated by the numerical experiments using the synthetic data of crosshole dc resistivity tomography.

• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.363-369
• /
• 1997

As a part of the study to know the deep geological structure of the Ogcheon Zone. gravity survey is performed along the survey line of which direction is roughly perpendicular to major faults of the Zone. Recent studies for petrology. geochemistry. and structural geology in south-western Ogcheon Zone are outlined. Raw gravity data are corrected to obtain Bouguer anomalies and the anomalies are interpreted to obtain subsurface structures along the survey line. The subterranean density discontinuities determined from the power spectrum method are appeared at depths of 15.4 km and 2.8 km. It is considered that the depth of 15.4 km indicates the boundary between upper and lower crust. Probably the depth of 2.8 km represents the boundary between upper volcanic formations and granites. Alternatively. the observed Bouguer anomalies are interpreted in terms of lateral density variation model. Finally. the subterranean geological structure to satisfy the Bouguer anomalies is presented through the iterative forward method in which results obtained from surface geological informations and from the inverse method are adopted as an initial model.

• Economic and Environmental Geology
• /
• v.21 no.2
• /
• pp.131-137
• /
• 1988

Geological and electrical resistivity surveys were carried out to investigate subsurface geology and geologic structure of the Bonghwajae area in the Okchon zone. Pseudosections of the apparent electrical resistivity distribution along the three survey lines were obtained by using dipole-dipole electrode array method, and models of subsurface geology and geologic structure by using two dimensional finite difference method. The Bonghwajae fault zone exists around Bonghwajae area in the north-south direction, and is a boundary between Okchon Group and Choson Supper Group. Metabasite and hornblende gabbro intruded along the Bonghwajae fault zone remaining two fracture zones with low resistivity value of 20 ohm-m and widths of about 100m and 70-300m. They strike nearly N-S and dip westward with a high angle of $60-70^{\circ}$. Sochangri fault with a width of about 160m exists between Jisogori and Bonghwajae, by which Bonghwajae fault zone is displaced about 1km in the east-west direction. Hornblende gabbro whose electrical resistivity value is in the range of 5000-8000 ohm-m intruded the metabasite of 2000-4500 ohm-m after the Sochangri fault had formed. Great Limestone Group is widely distributed in the east of Bonghwajae fault zone, and interbeds so called Yongam formation of graphitic black slate with an extremely low electrical resistivity value of 2 ohm-m.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.47.2-47.2
• /
• 2021

The present study is focused on origins of the flow and magnetic structure involved in the formation and eruption of a solar prominence. To clarify them, we performed an MHD simulation based on the 3-dimensional emerging flux tube (3DEFT) model, in which self-consistent evolution of a flow and magnetic field passing freely through the solar surface was obtained by seamlessly connecting subsurface dynamics with surface dynamics. By analyzing Lagrangian displacements of magnetized plasma elements, we demonstrate the flow structure which is naturally incorporated to the magnetic structure of the prominence formed via dynamic interaction between the flow and magnetic field.

• Journal of the Korean Geophysical Society
• /
• v.6 no.3
• /
• pp.179-188
• /
• 2003

The object of grounding of electrical facility is to protect human and machine damage from the power supply interruption high voltage by use of the accident current dissipating into the ground. Generally, it is not easy to make suitable ground design for inhomogeneous subsurface geology and the variability of accident current in magnitude and duration time. To make efficient ground, ground potential rise must be controlled in the way of overall lowering and evenness. This study shows the case of optimized ground design by use of subsurface resistivity structure from electrical soundings.

• Journal of Korea Water Resources Association
• /
• v.34 no.4
• /
• pp.403-411
• /
• 2001

This paper investigates the applicability of a modified version of TOPMODEL considering shallow subsurface storm flow in a forested mountaneous catchment. The macroporous soil structure provides a hydrological pathway for rapid runoff generation. A modified version of TOPMODEL introduces the two-storage system to analyze the hydrograph recession including rapid subsurface storm flow component. The two-month continuous hydrologic simulations of sulmachun watershed suggest that a modified version of TOPMODEL represents comprehensive and realistic flow generation mechanism comparing to those of an original version of TOPMODEL. The results of parameter calibration with Monte-Carlo method indicate a modified version of TOPMODEL produces a set of physically meaningful parameters.