• 대한금속재료학회지
• /
• 제47권1호
• /
• pp.13-20
• /
• 2009

This work presents functionally graded coatings (FGC) of hydroxyapatite (HA) and metallic powders on Ti-6Al-4V implants using plasma spray coating method. HA has been the most frequently used coating material due to its excellent compatibility with human bones. However, because of the abrupt changes in thermomechanical properties between HA and the metallic implant across an interface, and residual stress induced on cooling from coating temperture to room temperature, debonding at the interface occurs in use sometimes. In this work, FGC of HA and Ti or Ti-alloy powders is made to mitigate the abrupt property changes at the interface and the effect of FGC on residual stress release is investigated by evaluating the mechanical bond strength between the implant and the HA coating layers. Thermal annealing is done after coating in order to crystallize the HA coating layer which tends to have amorphous structure during thermal spray coating. The effects of types and compositional ratio of metallic powders in FGC and annealing conditions on the bond strength are also evaluated by strength tests and the microstructure analysis of coating layers and interfaces. Finally, biocompatibility of the coating layers are tested under ISO 10993-5.

• Geomechanics and Engineering
• /
• 제30권2호
• /
• pp.169-185
• /
• 2022

The urbanization and increasing rate of population demands effective means of transportation system (basement and tunnels) as well as high-rise building (resting on piled foundation) for accommodation. Therefore, it unavoidable to construct basements (i.e., excavation) nearby piled foundation. Since the basement excavation inevitably induces soil movement and stress changes in the ground, it may cause differential settlements to nearby piled raft foundation. To understand settlement and load transfer mechanism in the piled raft due to excavation-induced stress release, numerical parametric studies are carried out in this study. The effects of excavation depths (i.e., formation level) relative to piled raft were investigated by simulating the excavation near the pile shaft (i.e., H_e/L_p=0.67), next to (H_e/L_p=1.00) and below the pile toe (H_e/L_p=1.33). In addition, effects of sand density and raft fixity condition were investigated. The computed results have revealed that the induced settlement, tilting, pile lateral movement and load transfer mechanism in the piled raft depends upon the embedded depth of the diaphragm wall. Additional settlement of the piled raft due to excavation can be account for apparent loss of load carrying capacity of the piled raft (ALPC). The highest apparent loss of piled raft capacity ALPC (on the account of induced piled raft settlement) of 50% was calculated in in case of H_e/L_p = 1.33. Furthermore, the induced settlement decreased with increasing the relative density from 30% to 90%. On the contrary, the tilting of the raft increases in denser ground. The larger bending moment and lateral force was induced at the piled heads in fixed and pinned raft condition.

• Steel and Composite Structures
• /
• 제44권2호
• /
• pp.199-210
• /
• 2022

This study build finite element analysis (FEA) models describing the bending events of coiled tubing (CT) at the wellhead and trips into the hole, accurately provide the state of stress and strain while the CT is in service. The bending moment and axial force history curves are used as loads and boundary conditions in the diametrical growth models to ensure consistency with the actual working conditions in field operations. The simulation diametrical growth results in this study are more accurate and reasonable. Analysis the factors influencing fatigue and diametrical growth shows that the internal pressure has a first-order influence on fatigue, followed by the radius of the guide arch, reel and the CT diameter. As the number of trip cycles increase, fatigue damage, residual stress and strain cumulatively increase, until CT failure occurs. Significant residual stresses remain in the CT cross-section, and the CT exhibits a residual curvature, the initial residual bending configuration of CT under wellbore constraints, after running into the hole, is sinusoidal. The residual stresses and residual bending configuration significantly decrease the buckling load, making the buckling and buckling release of CT in the downhole an elastic-plastic process, exacerbating the helical lockup. The conclusions drawn in this study will improve CT models and contribute to the operational and economic success of CT services.

• Geomechanics and Engineering
• /
• 제31권1호
• /
• pp.53-69
• /
• 2022

In densely built areas, the development of underground transportation systems often involves twin excavations, which are sometimes unavoidably constructed adjacent to existing piled foundations. Because soil stiffness degrades with induced stress release and shear strain during excavation, it is vital to investigate the piled raft responses to subsequent excavation after the first tunnel in a twin-excavation system. The effects of deep excavations on existing piled foundations have been extensively investigated, but the influence of twin excavations on a piled raft is seldom reported in the literature. In this study, three-dimensional numerical analyses were carried out to investigate the influence of sand density on an existing piled raft (with a working load on top of the raft) due to twin excavations. A wide range of relative density (D_r) from loosest (30%), loose to medium (50% and 70%), and densest (90%) were selected to investigate the effects on settlement and load transfer mechanism of the piled raft during twin excavations. An advanced hypoplastic sand model (which can capture small-strain stiffness and stress-state dependent dilatancy of sand) was adopted. The model parameters are calibrated against centrifuge test results in sand reported in the literature. From the computed results, it is found that twin excavations in loose sand (D_r=30%) caused the most significant settlement. This is because of the higher stiffness of denser sand (D_r=90%) than that of loose sand. In contrast, a much larger tilting (maximum magnitude=0.18%) was computed in dense sand than in loose sand after the completion of the first excavation. As far as the load transfer mechanism along the piles is concerned, an upward load transfer to mobilize shaft resistance is observed in loose sand. On the contrary, a downward load transfer is observed in dense sand.

• Journal of Microbiology and Biotechnology
• /
• 제34권3호
• /
• pp.596-605
• /
• 2024

Anthocyanins belong to phenolic pigments and are known to have various pharmacological activities. This study aimed to investigate whether anthocyanins could inhibit hydrogen peroxide (H₂O₂)-induced oxidative damage in human retinal pigment epithelial ARPE-19 cells. Our results indicated that anthocyanins suppressed H₂O₂-induced genotoxicity, while inhibiting reactive oxygen species (ROS) production and preserving diminished glutathione. Anthocyanins also suppressed H₂O₂-induced apoptosis by reversing the Bcl-2/Bax ratio and inhibiting caspase-3 activation. Additionally, anthocyanins attenuated the release of cytochrome c into the cytosol, which was achieved by interfering with mitochondrial membrane disruption. Moreover, anthocyanins increased the expression of heme oxygenase-1 (HO-1) as well as its activity, which was correlated with the phosphorylation and nuclear translocation of nuclear factor-erythroid-2 related factor 2 (Nrf2). However, the cytoprotective and anti-apoptotic effects of anthocyanins were significantly attenuated by the HO-1 inhibitor, demonstrating that anthocyanins promoted Nrf2-induced HO-1 activity to prevent ARPE-19 cells from oxidative stress. Therefore, our findings suggest that anthocyanins, as Nrf2 activators, have potent ROS scavenging activity and may have the potential to protect ocular injury caused by oxidative stress.

• Reproductive and Developmental Biology
• /
• 제36권3호
• /
• pp.167-172
• /
• 2012

The key regulators of apoptosis are the interacting protein of the Bcl-2 family. Bcl-2, an important member of this family, blocks cytochrome C release by sequestering pro-apoptotic BH3-only proteins such as Bid, Bad, Bax and Bim. The pro-survival family members (Bcl-2, Bcl-XL, Bcl-W) are critical for cell survival, since loss of any of them causes cell death in certain cell type. However, its role during early porcine embryonic development is not sufficient. In this study, we traced the effects of Bcl-2 inhibitor, ABT-737, on early porcine embryonic development. We also investigated several indicators of developmental potential, including gene expression (apoptosis-related genes) and apoptosis, which are affected by ABT-737. Porcine embryos were cultured in the PZM-3 medium with or without ABT-737 for 6 days. In result, significant differences in developmental potential were detected between the embryos that were cultured with or without ABT-737 ($14.7{\pm}3.0$ vs $30.3{\pm}4.8%$, p<0.05). TUNEL assay showed that the number of containing fragmented DNA at the blastocyst stage increased in the ABT-737 treated group compared with control (4.7 vs 3.7, p<0.05). The mRNA expression of the pro-apoptotic gene Bax increased in ABT-737 treated group (p<0.05), whereas expressions of the anti-apoptotic Bcl-2 family members (Bcl-2, Bcl-XL, Bcl-W) decreased (p<0.05). Also, expressions of the ER stress indicator genes (GRP78, XBP-1 and sXBP-1) increased in ABT-737 treated group (p<0.05). In conclusion, Bcl-2 is closely associated with of apoptosis- and ER stress-related genes expressions and developmental potential in pig embryos.

• 한국진공학회지
• /
• 제9권2호
• /
• pp.155-161
• /
• 2000

이온빔보조증착법을 이용하여 c-BN(70%)/h-BN(30%) 혼합막을 합성하였으며, 이를 후속 열처리로 안정화 시켰다. 보론은 e-beam evaporator로, 질소는 end-hall type 이온 건으로 공급하였으며, 기판에는 -400과 -500V의 DC 바이어스를 각각 인가하였고, $700^{\circ}C$로 가열하였다. 보론의 기화속도는 1.2 $\AA$/sec였고, 질소이온의 에너지는 약 100 eV였다. 막 합성 후같은 진공에서 후속열처리를 $700^{\circ}C$ 및 $800^{\circ}C$에서 1시간동안 각각 행하였다. 후속열처리를 하지 않은 경우에는 공기 중에 노출된 직후에 막이 기판에서 박리된 반면, $800^{\circ}C$에서 후속 열처리를 한 경우에는 안정하였다. 후속 열처리에 의하여 막 전체의 응력은 4.9 GPa에서 3.4 GPa로 감소하였으나, c-BN상의 응력은 변화하지 않았다. 이러한 결과는 c-BN상의 응력 해소를 주요 안정화 기구로 보고한 기존의 결과와 다른 것으로, 후속 열처리 동안에, 비정질이나 결함이 많은 h-BN상의 구조적, 화학적 relaxation에 의하여 막의 안정화가 진행될 수 있음을 의미한다. c-BN상의 분율이 작은 혼합막의 경우 비 c-BN상의 안정화가 막 전체의 안정화에 매우 중요할 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.619-625
• /
• 2008

패시베이션 및 절연 목적으로 이용하는 플라즈마 화학기상증착(PECVD)법에 의해 증착된 무기막과 웨이퍼 간 본딩 접착제로 이용하는 유기 박막 적층면의, 열 순환에 의한 잔류 응력 및 본딩 결합력의 효과를 4점 굽힙 시험법과 웨이퍼 곡률 측정법에 의해 평가하였다. 무기막으로는 산화 규소막($SiO_2$)과 산화 질화막($SiN_x$)이, 유기 박막으로는 BCB(Benzocyclobutene)가 이용되었다. 이를 통해, 열 순환 동안 무기막과 유기막 사이에서의 잔류 응력과 본딩 결합력의 상관관계에 대한 모델식을 개발하였다. 최대 온도 350 및 $400^{\circ}C$에서 수행한 열 순환 공정에서, PECVD 산화 질화막과 BCB로 구성된 다층막에서, 본딩 결합력은 첫 번째 순환 공정 동안 감소한다. 이는 산화질화막 내 잔류인장응력의 증가가 다층막의 잔류응력에 의해 변형되는 에너지 및 본딩 결합력의 감소를 유도한다는 모델식의 예측과 일치하며, PECVD 산화 규소막내 잔류 압축 응력의 감소가 다층막의 잔류응력에 의해 변형되는 에너지 및 본딩 결합력 상승을 이끄는 산화 규소막과 BCB 구조의 본딩 결합력 결과와 비교된다. 이러한 산화 규소막과 산화 질화막을 포함한 다층막의 상반된 본딩 결합력은 증착 공정 후 막 내에 형성된 수소 결합이 고온 순환 공정 동안 축합 반응을 통해 더 밀집되어 인장응력을 형성하기 때문임을 알 수 있었다.

• 한국식품영양학회지
• /
• 제25권1호
• /
• pp.123-131
• /
• 2012

The objective of the present study was to evaluate the potential antidiabetic and antioxidant effect of the ethanol extract from Chrysanthemum cornarium L. var. spatiosum(CSE) against alloxan-induced oxidative stress in pancreatic ${\beta}$-cells, HIT-T15. In this study, the antidiabetic effect of CSE was examined using the 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazoliu bromide(MTT) cell proliferation assay, lactate dehydrogenase(LDH) release assay, $NAD^+$/NADH ratio and insulin secretion. To further investigate whether CSE is involved in the antioxidant activity of alloxan-damaged HIT-T15 cells, its antioxidant effect against alloxan-induced oxidative stress was measured in HIT-T15 cells by determining the levels of antioxidant enzymes including superoxide dismutase(SOD), glutathione S-transferase(GST), glutathione reductase(GR) and glutathione peroxidase(GPx). The results of this analysis showed that alloxan significantly decreased cell viability, increased LDH leakage, and lowered $NAD^+$/NADH ratio and insulin secretion in HIT-T15 cells. However, CSE significantly increased the viability of alloxan-treated cells and lowered LDH leakage. The intracellular NAD+/NADH ratio and insulin secretion were also significantly increased by 1.7-fold and 1.3-fold, respectively, after treatment with 100 ${\mu}g/m{\ell}$ CSE. The HIT-T15 cells treated with alloxan showed significant decreases in the activities of antioxidant enzymes, while CSE significantly elevated the levels of antioxidant enzymes. These findings suggest that CSE could have a protective effect against cytotoxicity and dysfunction of pancreatic cells in the presence of alloxan-induced oxidative stress.

• 생명과학회지
• /
• 제26권12호
• /
• pp.1458-1465
• /
• 2016

본 연구는 oxidative stress에 의한 세포죽음 분석의 이상적인 모델로 사용되는 HT22세포를 이용하여 천문동 에탄올추출물의 glutamate에 의한 oxidative toxicity에 대한 신경보호 효과를 살펴보았다. 이를 위해 cell viability, lactate dehydrogenase (LDH), 그리고 세포죽음형태, reactive oxygen species (ROS), mitochondria membrane potential (MMP) 등에 대한 flow cytometry 및 Western blot분석을 이용하였다. 천문동 추출물의 처리는 cell viability 및 LDH분석에서 glutamate에 의한 cell toxicity를 저하시키며, 특히 apoptotic cell death를 현저히 감소시켰다. ROS 및 MMP분석 결과, 천문동 추출물은 ROS의 형성을 저하시키며 glutamate에 의해 저하된 MMP를 현저히 회복시켜 주었다. 이와 관련된 단백질 발현을 보면, 천문동 추출물은 PARP 및 HO-1의 발현을 억제하였다. 이상의 결과는 천문동 추출물이 HT22해마세포에서 ROS형성저해 및 MMP회복에 의해 세포죽음을 완화시켜 보호작용을 하는 것으로 사료되며 oxidative toxicity관련 질환에 적용 가능할 것으로 보여 진다.