• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.91-97
• /
• 1999

We propose a new method for measuring the frequency characteristics of phase velocity along a bone for bending vibration modes to diagnose its mechanical characteristics. By introducing a simple model of a distributed-constant-network, the phase velocity is determined for each frequency from the spatial distribution of velocity along a radius bone surface which is measured by the ultrasonic Doppler method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.493-505
• /
• 1997

In this paper, a wavelet image compression method using human visually estimated quantizer is proposed. The quantizer has three components. These are constructed by using effects of frequency band, background luminance, and spatial masking. The first quantization factor is a fixed constant value for each band. The second factor is calculated by averaging four wavelet coefficients in the lowest frequency band. The third factor is determined by the difference between wavelet coefficients in the lowest frequency band. Arithmetic coding is used for encoding quantized wavelet coefficients. Coefficients in the lowest band are transmitted without loss. Therefore the compressed image is decompressed by using three quantization factors which can be calculated in the receiver. Compared with previous image compression methods which adopted human visual system, the proposed method shows improved results with less computational cost.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.229-232
• /
• 2008

The Central East Sea Tsunami caused huge damage to the eastern coast of the Korean Peninsula, eapecially Imwon port was damaged relatively strongly beacause of water depth variation which makes the wave concentration on this port. there are many virtual tsunami in east sea which has a possibility of happening. So, it is very important to expect the region which may be damaged by vritual tsunmis. In this study, modified dispersion-correction terms are used. The modified scheme has the advantage of using the constant spatial grid size and time step size even in real topography. Dynamic linking technique and staggered grid system are used. Using this model some cases of virtual tsunami was simulated and check the region which is occured maximum wave heights on the eastern sea of the Korean peninsula.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.431-434
• /
• 2008

Pratical dispersion-correction scheme is applicated to simulate the distant propagation of tsunami. This scheme is based on the leap-frog finite difference scheme for the linear shallow-water equations. The new scheme has the advantage of using the constant spatial grid size and time step size even in area of variable depths. And this new model constructed by using the 2nd upwind scheme, dynamic linking method, and staggered grid system. This model is simulated to near Sokcho harbor about The Central East Sea Tsunami in 1983. And this result is compared to tide gage and result of former model.

• Journal of Surface Science and Engineering
• /
• v.47 no.6
• /
• pp.287-292
• /
• 2014

The present study deals with a numerical analysis on the island growth of heteroepitaxial thin-films through local surface diffusivity enhancement. A non-linear governing equation for the surface waviness evolution in lattice-mismatched material systems is developed for the case of spatially-varying surface diffusivity. Results show that a flat film that is stable under constant diffusivity conditions evolves to form nanostructures upon externally-induced spatial diffusivity modulation. The periodicity of waviness can be controlled by changing the modulation parameters, which allows for generation of pattern arrays. The present study therefore points towards a post-deposition treatment technique that achieves controllability and order in the structure formation process for applications in nanoelectronics and thin-film devices.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.49-55
• /
• 2006

The purpose of the present study is to analyse characteristics of the background noise for the broadband seismic stations in KMA. It is well known that the background noise arises continuously from long period microseism, sea waves, minute changes of atmospheric pressure, seasonal temperature change of the ground surface, culture activities, and etc. The background noise shows spatial and temporal changes and it has various characteristics such as its spectral amplitudes in frequency domain are not constant Such the background noise gives considerable influences on the quality of seismic record. To investigate annual variations, the background noise was separated into high frequency components of above 1Hz More larger average amplitude is found in winter than other seasons. The average amplitude for 12 seismic stations are compared. It is known that the background noise is considerably larger in stations located in island region such as Jeju, Ulleungdo, and Bagryeongdo seismic stations. However the noise is relatively small in inland stations such as Chuncheon, Chungju and Uljin seismic stations.

• Journal of Urban Science
• /
• v.9 no.2
• /
• pp.63-68
• /
• 2020

In recent years, the planning of livable communities has emerged as a new paradigm. The concept of livable communities is related to both the spatial balance of working, playing, and living and the promotion of green modes of transportation, such as walking and biking. This study uses a disaggregate travel survey conducted by the Seoul Metropolitan Area in 2006. I applied a multi-level random intercept logit model to estimate the effects of land-use characteristics on the choice of green modes, holding a traveler's socio-demographic characteristics constant. The empirical results show that higher density and more mixed land-use development encourages people to walk and bike even when individuals have the same socio-economic characteristics. This paper demonstrates that land-use planning by itself can play a role in the creation of livable cities and the decline of greenhouse gas production.

• Steel and Composite Structures
• /
• v.48 no.3
• /
• pp.293-303
• /
• 2023

In this paper, geometrically nonlinear free vibration analysis of Mindlin viscoelastic plates with various geometrical and material properties is studied based on the Von-Karman assumptions. A novel solution is proposed in which the nonlinear frequencies of time-dependent plates are predicted according to the nonlinear frequencies of plates not dependent on time. This method greatly reduces the cost of calculations. The viscoelastic properties obey the Boltzmann integral law with constant bulk modulus. The SHPC meshfree method is employed for spatial discretization. The Laplace transformation is used to convert equations from the time domain to the Laplace domain and vice versa. Solving the nonlinear complex eigenvalue problem in the Laplace-Carson domain numerically, the nonlinear frequencies, the nonlinear viscous damping frequencies, and the nonlinear damping ratios are verified and calculated for rectangular, skew, trapezoidal and circular plates with different boundary conditions and different material properties.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.30-41
• /
• 1993

Developed in this paper is a feature based modeling system for the design of welded plat construction(WPC) which is composed of flat or bended plates represented as reference plane with a constant thickness. First, the necessity and the characteristics of the modeing system for WPC as compared with the assembly of mechanical parts are investigated. Secondly, feature library for the assembly of WPC is shown which contains several types of features like joint feature, groove feature, material feature, and precision feature. Thirdly, the assembly procedures are presented which mainly consist of both the assembly transformation and the correct assembly checking. Fourthly, weld lines of the assembled WPC are defined so that those can be used in the process planning or the manufacturing stage. Finally, a prototype by a geometric modeling software Pro/Engineer, a graphic software GL(Graphic Library), and C language on a CAD workstation IRIS.

• Structural Engineering and Mechanics
• /
• v.87 no.2
• /
• pp.191-200
• /
• 2023

This paper presents a mechanical model of a "tapered composite shaft" rotating at a constant speed around its axis. The spatial equations of motion are solved using the Lagrange technique, and a finite element approach is employed to construct the model. Theoretical analysis is used to compute the kinetic and strain energies. A comparison is made between conventional finite element methods and hierarchical finite element methods, indicating that the former uses fewer elements and provides higher accuracy in determining natural frequencies. Numerical calculations are performed to determine the eigen frequencies and critical speeds of the rotating composite shaft. The critical speeds of composite shaft systems are compared with existing literature to validate the proposed model.