• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.4
• /
• pp.3-11
• /
• 1993

We propose a new dual simplex method using a primal interior point. The dropping variable is chosen by utilizing the primal feasible interior point. For a given dual feasible basis, its corresponding primal infeasible basic vector and the interior point are used for obtaining a decreasing primal feasible point The computation time of moving on interior point in our method takes much less than that od Karmarker-type interior methods. Since any polynomial time interior methods can be applied to our method we conjectured that a slight modification of our method can give a polynomial time complexity.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.185-192
• /
• 1997

The combustion of cellulose insulation treated with Borax, Boric acid and Aluminum Sulfate as combustion retardants is examined by candle type combustion tester. The cellulose fibers in cellulose insulation are classified by diameter as less than 0.2mm, 0.2mm-0.5mm, 0.5mm-2mm and more than 2mm. The burning behavior of cellulose insulation are studied by LOI (Limit Oxygen Index: Beginning point of smoldering), L- point (Lower point of combustion transition from smoldering- flaming to flaming combustion), LOI, L-point and H-point rise with the increasing particle size of cellulose fibers because thermal decomposition rate of cellulose fiber decreases. The phenomena of combustion transition from smoldering to flaming combustion are determined by the generating rate of combustible gas and the formation rate of combustible gas mixture within the zone of cellulose fiber heated.

• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.435-438
• /
• 2008

D2O, which is used in nuclear power generation, is slightly different from $H_2O$. $D_2O$ consists of deuterium (D), which is an isotope of hydrogen (H) and has one more neutron than H. $D_2O$ is heavier by about 11% than $H_2O$, and $D_2O$ is present in water in natureat about 0.002%. Its melting point and boiling point are $3.81^{\circ}C$ and $101.42^{\circ}C$, respectively. $D_2O$ is harmful to the human body if it replaces water in the human body by more than $25%{\sim}50%$. We have measured the index of refractive and power absorption of 0%, 25%, 50%, 75%, and 100% of $D_2O$ in $H_2O$ using terahertz time-domain spectroscopy, and we have found that the refractive index decreases and power absorption also decreases as the concentration of $D_2O$ increases.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.272-278
• /
• 1998

This study was carried out to investigate the functional properties such as nitrogen solubility, emulsifying property , foaming capapcity , water and oil absorption of Camellia (Camellia japonica .) seed protein isolate in condition of distilled water and 0.5M NaCl solution at pH 2.0∼10.0. Nitrogen solubility of Camellia protein isolate in distilled water showed the minimum value at pH 4.0 and increased at pH lower or higher than the isoelectric point(pH 4.0). It was 90.0 %at pH 10.0 Nitrogen solubility of 0.5M NaCl solution showed a similar pattern with that of distrille dwater but was higher than that of distilled water except pH 2.0 and pH 10.0. Emulsifying activity of Camellia seed protein islate showed the minimum value at pH 4.0, but was higher at ether value of pH. Emulsifying stability of protein isolate was stable by heat treatment for 30min, at 80℃ and increased in 0.5M NaCl solution more than that of distille dwater. Foaming capacity of Camellia seed protein isolate in distill3ed water showed the minimum value near the isoelectric point, While it changed little at other values of pH. Foaming stability slowly decreased as, but didn't make a significant difference as time was delayed . Oil absorption was 1.4ml per a sample of 1g and water absorption was 0.9ml per a sample of 1g. The former was higher than the latter . The content of total amino acid of Camellia protein isolate was 43.67% and the major total amino acid of Camellia protein isolate was 43.67% and the major total amino acid was in the order of glutamic acid , arginine, aspartic acid, and leucine.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.52-58
• /
• 2012

Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.5
• /
• pp.707-716
• /
• 2008

The objective of this study was to analyze the effect of mixed fuel composition and mass fraction on spray inner structure in evaporating transient spray under the variant ambient conditions. Spray structure and spatial distribution of liquid phase concentration were investigated using a thin laser sheet illumination technique on the three component mixed fuels. A pulsed Nd:YAG laser was used as a light source. The experiments were conducted in a constant volume vessel with optical access. Fuel was injected into the vessel with electronically controlled common rail injector. Used fuel contains i-octane($C_8H_{18}$), n-dodecane($C_{12}H_{26}$) and n-hexadecane($C_{16}H_{34}$) that were selected as low-, middle- and high-boiling point fuel, respectively. Experimental conditions are 42 MPa, 72 MPa and 112 MPa in injection pressure, $5\;kg/m^3$, $15kg/m^3$ and $30kg/m^3$ in ambient gas density, 300 K, 500 K, 600 K and 700 K in ambient gas temperature, 300 K and 368 K in fuel temperature and different fuel mass fraction. Experimental results indicated that the multi-component fuels made two phase region mixed vapor and liquid so that it would are helpful to improve combustion, for the fuels of high boiling point component could accelerate evaporation very much according as low boiling point fuel was added to high boiling point fuel.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.115-126
• /
• 1996

In the time optimal control problem, bang-bang control has been used becaese it is the theoretical time minimum solution. However, to improve tracking speed performance in the time optimal control, it is important to select a switching point accurately which makes the velocity zero near the target track. But it is not easy to select the swiching point accurately because of the damping coefficient variation and uncertainties of modeling an actual system. The Adaptive model following control(AMFC) is implemented to relieve the difficulty and inconvenience of this task. The AMFC and make the controlled plant follow as closely as possible to a desired reference model whose switching point can be calculated easily and accurately, assuring the error between the states of the reference model and those of the controlled plant appoaches zero. The hybrid control method composed of AMFC and PID is applied to a tracking actuator of the magneto optical disk drive(MODD) in random access devices to improve its slow tracking performance. According to the simulaion and experimental results, the average tracking time as small as 20ms is obtained for a 3.5 magneto-optical disk drive. The AMFC also can be applied for other random access devices to improve the average tracking performance.

• Journal of Korean Society of Transportation
• /
• v.6 no.1
• /
• pp.43-53
• /
• 1988

This study is to find the proper method of estimating urban road traffic capacity. To estimate road traffic capacity, the following methods are chosen ; 1) crossing point of Q-V and S-V, 2) critical velocity and density of Q-V-K model, 3) V-K model with density parameter. The density estimated through S-V relation is 174 veh./km. The methods used in this paper yields more stable values with 2286 veh./h/ in average. The estimated average capacity by three methods are 2272 veh./h. in multilane road. 2411 veh./h in three lane road and 2185 veh./h. in two lane road.

• Journal of applied mathematics & informatics
• /
• v.31 no.3_4
• /
• pp.565-575
• /
• 2013

Let H be a real Hilbert space and let T : H ${\rightarrow}$ H be a Lipschitz pseudocontractive mapping. We introduce a modified Ishikawa iterative algorithm and prove that if $F(T)=\{x{\in}H:Tx=x\}{\neq}{\emptyset}$, then our proposed iterative algorithm converges strongly to a fixed point of T. No compactness assumption is imposed on T and no further requirement is imposed on F(T).

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.485-487
• /
• 2014

Nitrogen이 도핑된 graphene에서의 hydrogen evolution에 대한 촉매효과에 대해서 연구를 진행하였다. Reaction free energy를 계산하기 위해서 많은 N-doped graphene 모델을 계산하였으며 pH 조건, silicon cathode의 영향 그리고 zero point energy의 효과를 고려하였다. Volcano plot에 의하면 "pyrol" like model과 N-doped armchair graphene model (aGNR-N1)이 좋은 촉매효과를 가짐을 밝혔다. 또한 free energy diagram을 통하여 "pyrol"과 "aGNR-N1"이 좋은 active site가 될 수 있음을 확인하였고 pH가 증가함에 따라 $H^+$의 에너지가 증가함에 따라 촉매 효과가 줄어듬을 확인하였다.