Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Forming Analysis for the Roll Forming Process of 3 Point Under Rail

3점 언더레일 슬라이드의 롤포밍 공정에 대한 성형해석연구

  • Jung, D.W. (Major of Mechanical Engineering, Jeju National University) ;
  • Park, S.H. (Major of Mechanical Engineering, Pusan National University) ;
  • Jeong, J.H. (Major of Mechanical Engineering, Jeju National University)
  • 정동원 (제주대학교 기계시스템공학부) ;
  • 박상후 (부산대학교 기계공학부) ;
  • 정지현 (제주대학교 기계시스템공학부)
  • Received : 2012.06.27
  • Accepted : 2012.09.14
  • Published : 2012.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.

Keywords

References

  1. Wick, C., Benedic, J. T., and Veilleux, R. F., 1984, "Tool and Manufacturing Engineers Handbook", Society of Manufacturing Engineers, Michigan, Vol. 2, Chapter 8.
  2. Tehrani, M. S., Hartley, P., Naeini, H. M. and Khademizadeh, H., 2005, "Localised Edge Buckling in cold Roll-Forming of Symmetric Channel Section", Thin-Walled Structures, Vol. 44, No. 2, pp. 1-13.
  3. Lee, S. Y., 2001, "Analysis of Roll Forming Process for Pipe using Rigid-Plastic Finite Element Method", M. S. Dissertation, Sogang Univ., pp. 50-61.
  4. Lee, T. S., and KIM, G. H., 2009, "Finite Element Analysis for Precision Roll Forming Process of Stainless Slide Rail", Journal of the Korean Society for Precision Engineering, Vol. 26, No. 8, pp. 96-103.
  5. Jeong, S. H, Lee, S. H., Kim, G. H., Kim, J. S. and Kim, J. T., 2008, "A Study on Roll Forming Simulation of Under Rail", Transactions of the Korean Society of Machine Tool Engineers", Vol. 17, No. 3, pp. 78-85.
  6. Jeong, D. W. and Yang, K. B., 1999, "A Study the Criterion for Membrane/Shell Mixed Element and Application to the Rigid-Plastic/Elastic- Plastic Finite Element Analysis", The Korean Society of Ocean Engineers, Vol. 13, No. 2, pp. 1-10.
  7. Ahn, D. G., Jung, D. W., Yang, D. Y., and Jung, W. J., 1996, "Rigid-Plastic Explicit Finite Element Formulation for Two-Dimensional Analysis of Sheet Metal Forming Processes", The Korean Society of Mechanical Engineers, Vol. 20, No. 1, pp. 88-99.

Cited by

  1. Effects of Design Parameters on the Ergonomic Quality of a Self-Closing Drawer vol.33, pp.8, 2016, https://doi.org/10.7736/KSPE.2016.33.8.655
  2. Roll Forming Analysis for All-in-one Cable Tray vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.143