• Journal of Trauma and Injury
• /
• v.33 no.3
• /
• pp.162-169
• /
• 2020

Purpose: There is increasing evidence in the literature regarding resuscitative endovascular balloon occlusion of the aorta (REBOA) globally, but few cases have been reported in Korea. We aimed to describe our experience of successful Zone III REBOA and to discuss its algorithm, techniques, and related complications. Methods: We reviewed consecutive cases who survived from hypovolemic shock after Zone III REBOA placement for 4 years. We reviewed patients' baseline characteristics, physiological status, procedural data, and outcomes. Results: REBOA was performed in 44 patients during the study period, including 10 patients (22.7%) who underwent Zone III REBOA, of whom seven (70%) survived. Only one patient was injured by a penetrating mechanism and survived after cardiopulmonary resuscitation. All patients underwent interventions to stop bleeding immediately after REBOA placement. Conclusions: This case series suggests that Zone III REBOA is a safe and feasible procedure that could be applied to traumatic shock patients with normal FAST findings who receive a chest X-ray examination at the initial resuscitation.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.149-154
• /
• 2015

Biometric techniques for authentication using body parts such as a fingerprint, face, iris, voice, finger-vein and also photoplethysmography have become increasingly important in the personal security field, including door access control, finance security, electronic passport, and mobile device. Finger-vein images are now used to human identification, however, difficulties in recognizing finger-vein images are caused by capturing under various conditions, such as different temperatures and illumination, and noise in the acquisition camera. The human photoplethysmography is also important signal for human identification. In this paper To increase the recognition rate, we develop camera based identification method by combining finger vein image and photoplethysmography signal. We use a compact CMOS camera with a penetrating infrared LED light source to acquire images of finger vein and photoplethysmography signal. In addition, we suggest a simple pattern matching method to reduce the calculation time for embedded environments. The experimental results show that our simple system has good results in terms of speed and accuracy for personal identification compared to the result of only finger vein images.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.6
• /
• pp.307-312
• /
• 2015

The sandwich panel is commonly used domestically because it's less costly and easier to handle. But fires have frequently occurred in buildings employing sandwich panels, such as the fires in Eecheon cold storage and in Gwangju Pyungdong industrial zone. Sandwich panels with steel plates on their surface prevent fire water from penetrating to the fire source, which makes it difficult to extinguish a fire in a timely manner. Toxic gas generated from some insulation material leads to serious loss of life and property. This study is intended to develop an extinguishing system for sandwich panels, thereby reducing the fire risk. Fire water and volume were determined in the wake of the study on the structure of a sandwich panel extinguishing system, and improvement and testing of the fire characteristics of the sandwich panel. Based on such study and test, a fire model test was conducted. Consequently, the sandwich panel with extinguishing system was proven to have a reduced fire risk, compared to traditional or fire retardant panels.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.25-31
• /
• 2004

Results of EGS4 based calculations to study the spatial resolution of gas detectors are described. The calculations include radial distribution of electrons generated by photons of various energies penetrating into variable thickness of Ar and Xe gas layers. Given a desired spatial resolution, the maximum allowed thickness of gas layer for each energy level is determined. In order to obtain 0.1mm spatial resolution, the maximum thickness for the Ar gas is found to be 2mm for photon energies below 14keV while the optimum energy of photons for Xe gas with the same thickness is about 45keV. The results of calculations performed to compare the number of electrons generated by CsI coated micro-channel plate and the number of electrons generated by the Ar and Xe gas layers are described. The results show that the number of electrons generated by the gases is about 10 times higher than the one generated by CsI coated micro-channel plate. A few sample gray scale images generated by these calculations are included.

• Bulletin of Food Technology
• /
• v.18 no.2
• /
• pp.99-108
• /
• 2005

As an alternative to gaseous sanitizer which having penetrating and diffusing capacities, aerosolsanitizer’s effect on killing pathogens was investigated. To test the efficacy of aerosolized sanitizer, peroxyacetic acid was aerosolized($5.42-11.42\mum$) by nebulizer(Royal-G Enterprise, ShenZhen,China) in a model cabinet against artificially inoculated target microorganisms on lettuce. Lettuceleaves were inoculated with a cocktail of three strains each of Escherichia coli O157:H7, Listeriamonocytogenes, and Salmonella Typhimurium and treated with sanitizer aerosol for 10 min, 30 and60 min in a model aerosol cabinet at room temperature($22\pm2^\circC$). After treatment, surviving cellsincluding injured cells were enumerated on appropriate selective agar or using the over-lay agar method, respectively. Inoculated lettuce leaves exposed to antimicrobial aerosol for 10 min experienceda 0.8 log reduction in E. coli O157:H7, a 0.3 log reduction in Salmonella Typhimurium and a 2.5 logreduction in L. monocytogenes when compared to the control. After 30 min treatment, the threepathogens were reduced in number of CFU by 2.2, 3.3, and 2.7-log and after 60 min, the reductions were 3.4, 4.5, and 3.8-log, respectively. Aerosolization can be new antimicrobial agents deliverysystem in food sanitizing.

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.261-268
• /
• 1991

The dielectric properties and microstructure of SrTiO3-based grain boundary layer (GBL) capacitor were investigated, and SrTiO3 GBL capacitor was made by penetrating the Frit (PbO-Bi2O3-B2O3 system). The Nb2O5-doped SrTiO3 ceramics were fired for 4-hours, at 145$0^{\circ}C$ in H2-N2 atomsphere to get semiconductive ceramics. The grain size of SrTiO3 sintered at reduction atmosphere had increased as the amount of Nb2O5 increases and then decreased as the amount of Nb2O5 exceeded 0.2 mole%. Insulating reagents which contained PbO-Bi2O3-B2O3 system frit and oxide mixture were printed on the each semiconductive ceramics and fired at varying temperature and for different holding time. The optimum dielectric properties could be obtained by second heat treatment at 110$0^{\circ}C$ for 1 hour, when frit paste was printed. A SrTiO3-based GBLC had the apparent permitivity of about 3.2$\times$104, the dielectric loss of 0.01~0.02 and the stable temperature coefficient of capacitance. The influence of frit paste on dielectric properties was similiar to that of oxide paste but the stability of temperature property of capacitance was improved.

• Journal of Environmental Science International
• /
• v.17 no.3
• /
• pp.297-303
• /
• 2008

For last couple of years many apartments, roads and bridges are constructed along the Kok-kyo stream which is penetrating Asan city, Chung-Nam Province. The effect of construction on stream environment was investigated in this study. Various kinds of water qualities of the Kok-kyo stream were monitored for 5 months. As it passed through the construction sites, $COD_{cr}$ concentration increased abruptly whereas the increment of the $BOD_5$ was not so great, indicating that non-biodegradable organics were flowed from the construction sites to the stream. Particularly, 0.2 mg/L of N-hexane was measured, which is believed to be mainly responsible for the organic pollution from construction sites. In spite of short periods of water quality monitoring, it could be concluded that there was a good correlation between construction sites and stream pollution. Therefore, legislative activity or enforced management by local government to the construction sites are needed for keeping the small stream environment better.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.404-404
• /
• 2000

The receiving responses of a bistatic GPR system are analyzed by using three-dimensional FDTD method and equivalent network model. The conventional delta-gap feed model may be inaccurate because of neglecting the impedance matching characteristics between the antenna and the transmission line. In this paper, the feed model is improved by considering the physical characteristics of the actual GPR. The actually received voltage is calculated by employing the equivalent network model in angular frequency-domain, which is composed by using the results of three-dimensional FDTD analysis for an actual bistatic GPR system. The validity of the presented model is assured by showing the convergence of the computed results to the measured data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.44-53
• /
• 2000

The receiving responses of a bistatic GPR system are analyzed by using three-dimensional FDTD method and equivalent network model. The conventional delta-gap feed model may be inaccurate because of neglecting the impedance matching characteristics between the antenna and the transmission line. In this paper, the feed model is improved by considering the physical characteristics of the actual GPR. The actually received voltage is calculated by employing the equivalent network model in angular frequency-domain, which is composed by using the results of three-dimensional FDTD analysis for an actual bistatic GPR system. The validity of the presented model is assured by showing the convergence of the computed results to the measured data.

• BMB Reports
• /
• v.51 no.5
• /
• pp.207-208
• /
• 2018

Chitinase-Like Proteins (CLPs) are an evolutionarily conserved protein which lose their enzymatic activity for degrading chitin macromolecules. Chitinase-3-like-1 (Chi3l1) is a type of CLP that is highly expressed in epithelial cells, macrophages, etc., and is known to have correlations with type 2 inflammation and cancer. Although the increased level of Chi3l1 in the blood was reported in various disease patients, the function of Chi3l1 in adaptive immunity has been totally unknown. Recently, we found that Chi3l1 is expressed in T cells and has a negative regulatory role in T-cell activation and proliferation. A genetic ablation study of Chi3l1 in T cells showed hyperresponsiveness to TcR stimulation, which increased proliferation and Th1 differentiation. A significant increase of $IFN{\gamma}$ signaling in Chi3l1-deficient T cells synergistically increased Th1 and CTL functions against melanoma cells in vitro and in vivo. In addition, targeted knockdown by Chi3l1 siRNA complexed with the cell-penetrating peptide dNP2, which showed decreased pulmonary melanoma metastasis with increased infiltration of Th1 and CTL in the lung. This study first suggests that Chi3l1 is a novel regulator of Th1/CTL responses and could be a target for treating cancer to increase tumor immunity.