Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Effect of the Frit of the 2nd Firing Oxide in $SrTiO_3$-Based GBLC on the Dielectric Properties

$SrTiO_3$계 Grain Boundary Layer Capacitor에서 2차 열처리 산화물의 Frit화가 유전적 성질에 미치는 영향

  • 유재근 (한양대학교 무기재료공학과) ;
  • 최성철 (한양대학교 무기재료공학과) ;
  • 이응상 (한양대학교 무기재료공학과)
  • Published : 1991.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The dielectric properties and microstructure of SrTiO3-based grain boundary layer (GBL) capacitor were investigated, and SrTiO3 GBL capacitor was made by penetrating the Frit (PbO-Bi2O3-B2O3 system). The Nb2O5-doped SrTiO3 ceramics were fired for 4-hours, at 145$0^{\circ}C$ in H2-N2 atomsphere to get semiconductive ceramics. The grain size of SrTiO3 sintered at reduction atmosphere had increased as the amount of Nb2O5 increases and then decreased as the amount of Nb2O5 exceeded 0.2 mole%. Insulating reagents which contained PbO-Bi2O3-B2O3 system frit and oxide mixture were printed on the each semiconductive ceramics and fired at varying temperature and for different holding time. The optimum dielectric properties could be obtained by second heat treatment at 110$0^{\circ}C$ for 1 hour, when frit paste was printed. A SrTiO3-based GBLC had the apparent permitivity of about 3.2$\times$104, the dielectric loss of 0.01~0.02 and the stable temperature coefficient of capacitance. The influence of frit paste on dielectric properties was similiar to that of oxide paste but the stability of temperature property of capacitance was improved.

Keywords

References

  1. CMC Technical Report, No. 13 エレクトロニクス用 セラミノクス Nohutatsu Yamaoka
  2. Review of the Electrical Communication Laboratory v.19 Classification and Dielectrics of the Boundary Layer Ceramic Dielectrics Shugeru wake(et al)
  3. J. Am. Ceram. Soc. v.57 Properties of Surface Barrier Layer Formed on a Semiconducting BaTiO₃Ceramics Kikuo Wakino
  4. J. Phy. Soc. Jap. v.14 Properties of Semiconductive Barium Titanale Osamu Saburi
  5. Advances in Ceramics v.1 Properties of SrTiO₃Based Boundary Layer Capacitors N. Yamaoka;T. Matsui;L.M. Levinson(ed.);D.C. Hill(ed.)
  6. Am. Ceram. Soc. Bull. v.62 no.6 $SrTiO_3-Based$ Boundary Layer Capacitor Having Varistor Characteristics N. Yamaoka;M. Masuyama;M. Fukui
  7. Advances in Ceramics v.1 SrTiO₃Boundary Layer Capacitor: Influence of Additive and Stoichiometry J. Klerk;P.J.H. Sanders;L.M. Levinson(ed.);D.C. Hill(ed.)
  8. J. Mat. Sci. v.17 Dielectric Properties of Donor-doped Pollycrystalline SrTiO₃ I. Burn and S. Neirman
  9. Am. Ceram. Soc. Phase Diagrams for Ceramists E.M. Levin;C.R. Robbins;H.F. Murdie
  10. J. Am. Ceram. Soc. v.68 no.4 Microstructure of SrTiO₃Internal Boundary Layer Capacitors During and After Processing and Resultant Electrical Properties Masayuki Fujimoto;W. David Kingery
  11. J. Am. Ceram. Soc. v.65 no.9 High-Temperature Defect Structure of Acceptor-Doped Strontium Titanate N.G. Error;U. Balachandran
  12. U.S. Patent, 4, 419, 310 Ian Burn
  13. Advances in Ceramics v.1 Tow-Layer Model Explaining the Properties of SrTiO₃Boundary Layer Capacitor R. Wernicke;L.M. Levinson(ed.);D.C. Hill(ed.)
  14. J. of Mat. Sci. v.16 no.Letters The Grain Boundary of SrTiO₃Boundary Layer Capacitor Material P.E.C. Franken;M.P.A. Vigers
  15. Science of Ceramics v.12 TEM Work on the Grain Boundaries M.P.A. Viegers;P. Vincenzini(ed.)
  16. J. Phys. Chem. Solids v.28 no.239 Formation of Point Defects in Strontium Titanate L.C. Walters; R.E. Grace
  17. Ceramic Japan v.5 no.9 グレ一ス · フりツト 大午克吉
  18. J. Am. Ceram. Soc. v.66 no.4 Solubility of Lanthanium in Strontium Titanate U. Balachandran;N.G. Eror
  19. J. Phys. Chem. Solids v.11 no.274 Dielectric properties of Single Crystals of SrTiO₁at Low Temperature H.E. Weaver
  20. Phys. Rev. v.157 no.2 Temperature Dependent Polarizabilities in Paraelectric BaTiO₃and SrTiO₃at Low Temperature W.N. Lawless;H. Graonicher