• 한국전자통신학회논문지
• /
• 제11권5호
• /
• pp.473-478
• /
• 2016

본 논문은 RTP법으로 산화막을 질화시킨 질화산화막으로 MIS 커패시터를 제작하여 avalanche 주입에 따른 캐리어 트랩 특성을 조사하였다. avalanche 주입에 의한 flatband 전압 변화는 두 번의 turn-around가 관찰되었는데 이는 처음 산화막에서 전자 트래핑이 있어나고, 전하 주입에 따라 홀 트래핑에 의한 turn-around 후 다시 전자 트래핑이 일어나는 것을 관찰하였다. 질화 산화막의 캐리어 트랩 파라미터를 결정하기 위하여 실험 결과를 기초로 종류가 다른 여러 트랩을 갖는 계에 대한 캐리어 트래핑을 비교한 결과 실험값과 일치함을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.1-8
• /
• 2004

두께가 3nm인 게이트 산화막을 사용한 n-MOSFET에 정전압 스트레스를 가하였을 때 관찰되는 SILC 및 soft breakdown 열화 및 이러한 열화가 소자 특성에 미치는 영향에 대해 실험하였다. 열화 현상은 인가되는 게이트 전압의 극성에 따라 그 특성이 다르게 나타났다. 게이트 전압이 (-)일 때 열화는 계면 및 산화막내 전하 결함에 의해 발생되었지만, 게이트 전압이 (＋)일 때는 열화는 주로 계면 결함에 의해 발생되었다. 또한 이러한 결함의 생성은 Si-H 결합의 파괴에 의해 발생할 수 있다는 것을 중수소 열처리 및 추가 수소 열처리 실험으로부터 발견하였다. OFF 전류 및 여러 가지 MOSFET의 전기적 특성의 변화는 관찰된 결함 전하(charge-trapping)의 생성과 직접적인 관련이 있다. 그러므로 실험 결과들로부터 게이트 산화막으로 터널링되는 전자나 정공에 의한 Si 및 O의 결합 파괴가 게이트 산화막 열화의 원인이 된다고 판단된다. 이러한 물리적 해석은 기존의 Anode-Hole Injection 모델과 Hydrogen-Released 모델의 내용을 모두 포함하게 된다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.34-39
• /
• 2014

This paper discusses the 3-level charge pumping (CP) method in planar-type Silicon-Oxide-High-k-Oxide-Silicon (SOHOS) and Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) devices to find out the reason of the degradation of data retention properties. In the CP technique, pulses are applied to the gate of the MOSFET which alternately fill the traps with electrons and holes, thereby causing a recombination current Icp to flow in the substrate. The 3-level charge pumping method may be used to determine not only interface trap densities but also capture cross sections as a function of trap energy. By applying this method, SOHOS device found to have a higher interface trap density than SONOS device. Therefore, degradation of data retention characteristics is attributed to the many interface trap sites.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.102-105
• /
• 1997

The thickness dependence of stress voltage oxide currents has been measured in oxides with thicknesses between 10nm and 80nm. The oxide currents were shown to be composed of stress current and transient current. The stress current was caused by trap assited tunneling through the oxide. The transient current was caused by the tunneling charging and discharging of the trap in the interfaces. The stress current was used to estimate to the limitations on oxide thicknesses. The transient current was used to the data retention in memory devices.

• Transactions on Electrical and Electronic Materials
• /
• 제4권6호
• /
• pp.32-37
• /
• 2003

In this paper, the trap characteristics of thin silicon oxides is investigated in the ULSI implementation with nano structure transistors. The stress and transient currents associated with the on and off time of applied voltage were used to measure the distribution of high voltage stress induced traps in thin silicon oxide films. The stress and transient currents were due to the charging and discharging of traps generated by high stress voltage in the silicon oxides. The transient current was caused by the tunnel charging and discharging of the stress generated traps nearby two interfaces. The stress induced leakage current will affect data retention in electrically erasable programmable read only memories. The oxide current for the thickness dependence of stress current, transient current, and stress induced leakage currents has been measured in oxides with thicknesses between 113.4nm and 814nm, which have the gate area 10$\^$-3/ $\textrm{cm}^2$. The stress induced leakage currents will affect data retention, and the stress current and transient current is used to estimate to fundamental limitations on oxide thicknesses.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권5호
• /
• pp.530-537
• /
• 2013

An explicit surface potential calculation method of gate-all-around MOSFET (GAAMOSFET) devices which takes into account both interface trap charge and varying doping levels is presented. The results of the method are extensively verified by numerical simulation. Results from the model are used to find qualitative and quantitative effect of interface trap charge on subthreshold slope (SS) of GAAMOSFET devices. Further, design constraints of GAAMOSFET devices with emphasis on the effect of interface trap charge on device SS performance are investigated.

• 전자공학회논문지D
• /
• 제34D권6호
• /
• pp.43-49
• /
• 1997

Tungsten poycide has studied gate oxide reliability and dielectric strength charactristics as the composition of gate electrode which applied submicron on CMOS and MOS device for optimizing gate electrode resistivity. The gate oxide reliability has been tested using the TDDB(time dependent dielectric breakdwon) and SCTDDB (stepped current TDDB) and corelation between polysilicon and WSi$_{2}$ layer. iN the case of high intrinsic reliability and good breakdown chracteristics on polysilicon, confirmed that tungsten polycide layer is a better reliabilify properities than polysilicon layer. Also, hole trap is detected on the polysilicon structure meanwhile electron trap is detected on polycide structure. In the case of electron trap, the WSi$_{2}$ layer is larger interface trap genration than polysilicon on large POCL$_{3}$ doping time and high POCL$_{3}$ doping temperature condition. WSi$_{2}$ layer's leakage current is less than 1 order and dielectric strength is a larger than 2MV/cm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.461-464
• /
• 1999

This study has been investigated that traps generated inside of the oxide and at the oxide interfaces by the stress bias voltage. The traps are charged near the cathode with negative charge and charged near the anode with positive charge. The charge state of the traps can easily be changed by application of low voltages after the stress high voltage. These trap generation involve either electron impact ionization processes or high field generation processes. It determined to the relative traps locations inside the oxides ranges from 113.4$\AA$ to 814$\AA$ with capacitor areas of 10$^{-3}$ $\textrm{cm}^2$ . The oxide charge state of traps generated by the stress high voltage contain either a positive or a negative charge.

• 전기전자학회논문지
• /
• 제27권3호
• /
• pp.303-307
• /
• 2023

본 논문은 Buried Channel Array Transistor(BCAT) 소자의 Oxide 내부에 Total Ionizing Dose(TID) effects으로 인한 Electron-Hole Pair의 생성이 유도되어, Oxide 계면의 Hole Trap Charge의 증가에 따른 누설전류의 증가와 문턱 전압의 변화를 기존에 제안한 Partial Isolation Buried Channel Array Transistor(Pi-BCAT)구조와 비교 시뮬레이션 하여, Pi-BCAT 소자의 증가한 Oxide 면적과 상관없이 변화한 누설전류와 문턱 전압에서의 특성이 비대칭 도핑 BCAT 구조보다 우수함을 보여 준다.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.529-537
• /
• 1994

The principle of the Isothermal Capacitance Transient Spectroscopy[ICTS] were explained to measure the electronic trap levels in oxide ceramics. The measurement apparatus and the theory of the ICTS were described in detail. The trap energy evaluation was performed for the ZnO varistor and BaTiO3 ceramics. The grain boundary interface trap levels were detected at -5$0^{\circ}C$~6$0^{\circ}C$ in the case of ZnO varistor and PTCR samples, and the bulk trap levels were detected at 2$0^{\circ}C$~60~ in BaTiO3. The trap energy levels of the above samples could be directly determined by ICTS measurement.