• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.124-129
• /
• 2010

Wind load characteristics is investigated for vibration analysis of wind turbine gearbox. A normal wind model assumed, of which the wind velocity is increased according to the height from ground. A blast wind model is assumed, of which the maximum velocity is located at the center and the velocity profile is normally distributed. The periodical torque and bending moments transmitted to the main shaft of wind turbine are investigated. The average values and the harmonic terms of the transmitted moments are studied on the wind direction of range $-45^{\circ}{\sim}45^{\circ}$ and the bending moment characteristics are examined, which is regarded as the main source of the misalignment of gear train.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.247-254
• /
• 1987

This study was undertaken to determine the adequate bracket slot torque degrees in Korean The subjects were consisted of plaster casts of 30 male and 30 female They had acceptable profile, normal occlusion, no loss of tooth and no experience of dental treatment Labiolingual or buccolingual inclinations of individual tooth were estimated as +, - degrees on the fixed model by use of dental surveyor, contact angle gauge and measuring grid The following conclusions were obtained 1 Adequate degrees of bracket slot torque in Korean were obtained 2 The degrees of labiolingual or buccolingual inclination of every tooth were very variable according to the individuals 3 Almost constant torque degrees were observed on the maxillary buccal segments 4 Progressive increase in minus torque degrees were observed from the mandibular canines to the 2nd molars.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.25-32
• /
• 1976

The present study was performed to establish the cephalometric standards of Hellman dental age II C groups of Korean on the roentgenocephalometry. The subjects consisted of 26 males and 25 females with normal occlusion and acceptable profile. The major conclusions may be listed as follows: 1) The tables of standard deviation from the measurements were made. 2) All linear measurements of skeletal pattern in male were greater than in female with exception of the mandibular body length measurement. 3) The labial inclinations of the upper and lower incisors were greater in female than in male. 4) Vertical growth tendency of the face nab conformed in the late primary dentition as compared with the measurements of the mixed dentition.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.39-46
• /
• 1976

This study was undertaken to establish the cephalometric standards, using lateral cephalometric roentgenograms of 48 male and 53 female Korean adults with normal occlusion and acceptable profile. By Cohen's method, measurement of depth was taken parallel to the FH plane and expressed as a percentage of the cranial base depth (BA-N). And vertical height was measured along the line perpendicular to the FH plane and expressed as a percentage of the anterior face height (N-M). The following conclusions were obtained: 1) Means and standard deviations of craniofacial proportions of Korean adults were tabulated. 2) Cranial babe depth of male was greater than that of female. 3) The proportionate depth of the middle face was greater in female than in male. 4) The proportionate total anterior face height was greater in male than in female. And it was greater in Korean than in the white.

• Journal of Periodontal and Implant Science
• /
• v.23 no.1
• /
• pp.135-143
• /
• 1993

The investigation was undertaken to determin the altered function and structure of granulation tissue fibroblasts. Human granulation-tissue fibroblasts were cultured from periodontal chronic inflammatory lesions (SBI index : above 3) and compared with healthy gingival connective tissues fibroblasts a control(SBI index : below 1). Granulation tissue fibroblasts proliferated with a slower growth rate and exhibited larger cell size than control cells. Total protein profile of granulation tissue fibroblasts was almost identical to that of control cells with some exception. These results support tha theory that granulation tissue fibroblasts represent a distinct phenotype of fibrotic cells.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.150-156
• /
• 2006

A Flapping foil Produces an effective angle of attack, resulting in a normal force vector with thrust and lift components, and it can be expected to be a new highly effective propulsion system. A heaving foil model was made and it was operated within a circulating water channel at low Reynolds numbers. The unsteady thrust and lift acting on the heaving foil were measured simultaneously using a 6-axis force sensor based on force and moment detectors. We have been examined various conditions such as heaving frequency and amplitude in NACA 0010 Profile. The results showed that thrust coefficient and efficiency increased with reduced frequency and amplitude. We also Presented the experimental results on the unsteady fluid forces of a heaving foil at various Parameters.

• Journal of Oriental Neuropsychiatry
• /
• v.2 no.1
• /
• pp.94-107
• /
• 1991

This clinical study was done to investigate how the perticular elements of coffee reflects a person using MMPI (Minesota Multiphasic Personality Inventory) as a guide. This study was done based on the sample groups of 29 coffee-drinking-studensts and 21 non-coffee-drinking students. The results were as follows ; 1. The mean T-scores on all the scales were within normal range in coffee-drinking-group. 2. The personal traits of coffee-drinking-group showed elevated scales of Hs, D, Hy and Pt and showed 3, 1, 2 profile type. 3. Comparing non-coffee-drinking-group with coffee-drinking-group, scales of Hs, D, Hy, Mf, Pt, Ma were significantly higher in the latter. 4. According to pattern analysis, Psycho-neurotic trait was recognized in 62.07% of non-coffee-drinking-group, 76.19% of coffee-drinking-group. As a result, aboves support the exiting hypothesis that coffee give rise to Blood-asthenia(血虛) and Spleen-Lack of transports(脾不運化) and have an influence on neurosis, psychosis and sleep disturbance.

• MALSORI
• /
• v.68
• /
• pp.1-15
• /
• 2008

This study investigated the vowel effect on laryngeal DDK (L-DDK) in terms of rate, regularity, and range. Thirteen normal speakers participated in this experiment. Speakers were asked to repeat the vowels /a, e, i, o, u/ for vocal fold adduction DDK, and /ha, he, hi, ho, hul for vocal fold abduction DDK. Acoustic data was analyzed via Motor Speech Profile. There were 6 parameters: DDKavp and DDKavr for rate of L-DDK, DDKcvp and DDKjit for regulariry of L-DDK, and DDKavi and DDKcvi for range of L-DDK. Results of MANOVA and Fredman analysis showed no significant vowel effect on rate and regularity of L-DDK. MANOVA revealed significant effects of vowels and vocal fold ab/adduction on range of L-DDK. DDK peak intensity (DDKavi) in vowel /i/ production was lower than in vowels /a, e, o, u/. Variation of DDK peak intensity (DDKcvi) was significantly greater for /ha/ than for /a/ production. The implication of these findings on voice and speech pathology is discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.211-219
• /
• 2000

This paper simulated surface grinding process with statistically simulated grinding wheel topography, considering ridge formation phenomenon when grain scratch workpiece. Wheel grain is modeled as hybrid sphere and cone. Grinding wheel characteristic was evaluated with stylus by expanding the scanning region of the profilometer from a straight line to a plane. Each grain's diameter and semi-angle are assumed as normal distribution, each grain's protrusion height from wheel plane is assumed gamma distribution. So grinding wheel is simulated with grain's position randomly distributed without overlapping. Ground surface is 3-dimensionally simulated considering ridge formation of workpiece by each grain's cutting, and then surface profile and surface roughness parameters are compared with real ground workpiece.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.519-523
• /
• 2007

Gas(or methane) hydrates are solid solutions when water molecules are linked through hydrogen bonding and create host lattice cavities that can enclose a large variety of guest gas molecules. The natural gas hydrate crystal may exist at low temperature above the normal freezing point of water and high pressure greater than about 30 bars. A lot of quantities of natural gas hydrates exists in the earth and many production schemes are being studied. In the present investigation, depressurization method was considered to predict the production of gas and the simulation of the two phase flow - gas and water - in porous media is being carried out. The simulation show about the fluid flow in porous media have a variety of applications in industry. Results provide the appearance of gas and water production, the pressure profile, the saturation of gas/ water/ hydrates profiles and the location of the pressure front.