• Journal of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.340-355
• /
• 1978

Model reactions were often applied in the measuring of the mass transfer coefficient and interfacial area between gas and liquid, which are the most important factors in the design of equipment for gas absorption accompanied with chemical reaction this study, wetted wall column was applied to the sulfite-system among the known model reactions. It was found that one could not ignore the effect of contact time on the determination of mass transfer coefficient and interfacial area. When the reaction rate is very high or very low, the differences of absorption rate would be very large in according to the length of column, that is to the contact time. But the effect of contact time was free about the rate constant $k_2=5.5{\times}10^6m^3/kmol{\cdot}s$, that means the rate of gas absorption become independent upon the hydrodynamics of the equipment. It has shown that instead of steel column could be applied the fine grain-graphite column.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.3
• /
• pp.219-225
• /
• 2006

We consider a routing and wavelength assignment (RWA) for the efficient operation of WDM networks. For a given physical network, a set of selected pairs of nodes, the number of required connections for each selected pair of nodes, and a set of available wavelengths, the RWA is to realize as many connections as possible without wavelength collision. We give an integer programming formulation and an algorithm based on column generation. Though the proposed algorithm does not guarantee optimal solutions, test results show that the algorithm gives probably good solutions.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.25-32
• /
• 1994

Arylmethyl halides(benzyl chloride, BZYC; benzal chloride, BZYA; benzotrichloride, BZTC) and related compounds(benzyl alcohol, BZYA; benzoyl chloride, BZOC) were determined by GC using capillary column. Detailed results are as follows. 1. Stability In methanol benzotrichloride slowly transferred to benzoyl chloride by hydrolysis(ca. 7.5% for 5 days), but the others were stable. Therefore, benzotrichloride solution should be prepared just before analysis. 2. GC analysis Tenax-GC was used to absorbent and desorption solvents were $CCl_4$ and MeOH. Arylmethyl halides were analyzed within 7.5min without interference with related compounds. The calibration curve(ca. 15-80 ppm in soln), repeatability(n=10) and the desorption efficiency were good. Limit of detection by NIOSH method was about 0.003 ppm for arylmethyl halide, respectively. To analyze arylmethyl halides and related compounds in working places GC using capillary column is anticipated to be used effectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2449-2456
• /
• 2013

The column-oriented database storage is a very advanced model for large-volume data analysis systems because of its superior I/O performance. Traditional data storages exploit row-oriented storage where the attributes of a record are placed contiguously in hard disk for fast write operations. However, for search-mostly datawarehouse systems, column-oriented storage has become a more proper model because of its superior read performance. Recently, solid state drive using MLC flash memory is largely recognized as the preferred storage media for high-speed data analysis systems. In this paper, we introduce fast column-oriented data storage model and then propose a new storage management scheme using a cross compressed replication for the high-speed column-oriented datawarehouse system. Our storage management scheme which is based on two MLC SSD achieves superior performance and reliability by the cross replication of the uncompressed segment and the compressed segment under high workloads of CPU and I/O. Based on the results of the performance evaluation, we conclude that our storage management scheme outperforms the traditional scheme in the respect of update throughput and response time of the column segments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.708-715
• /
• 2016

The modelling and optimization of Methyl Ethyl Ketone (MEK)-Cyclohexane (CH) separation process were performed using pressure-swing distillation with a low-high pressure column and a high-low pressure column configuration. The optimization was performed for the number of theoretical stages, and the location of the feed tray of low column and high column to obtain high-purity MEK at the top. The total reboiler heat duty at the low-high pressure column configuration and high-low pressure column configuration were at 11.7667 Mkcal/h and at 10.3484 Mkcal/h, respectively. The results showed that total reboiler heat duty could be reduced to 12.05% using a high-low pressure column configuration.

• Structural Engineering and Mechanics
• /
• v.61 no.4
• /
• pp.527-538
• /
• 2017

The evaluation of the loss-of-support conditions of frictional beam-to-column connections using simplified numerical models describing the transverse response of a portal-like structure is presented in this paper considering the effects of the seismic-hazard disaggregation. Real earthquake time histories selected from European Strong-motion Database (ESD) are used to show the effects of the seismic-hazard disaggregation on the beam loss-of-support conditions. Seismic events are classified according to different values of magnitudes, epicentral distances and soil conditions (stiff or soft soil) highlighting the importance of considering the characteristics of the seismic input in the assessment of the loss-of-support conditions of frictional beam-to-column connections. A rigid and an elastic model of a frame of a precast industrial building (2-DoF portal-like model) are presented and adopted to find the minimum required friction coefficient to avoid sliding. Then, the mean value of the minimum required friction coefficient with an epicentral distance bin of 10 km is calculated and fitted with a linear function depending on the logarithm of the epicentral distance. A complete parametric analysis varying the horizontal and vertical period of vibration of the structure is performed. Results show that the loss-of-support condition is strongly influenced by magnitude, epicentral distance and soil conditions determining the frequency content of the earthquake time histories and the correlation between the maxima of the horizontal and vertical components. Moreover, as expected, dynamic characteristics of the structure have also a strong influence. Finally, the effect of the column nonlinear behavior (i.e. formation of plastic hinges at the base) is analyzed showing that the connection and the column are a series system where the maximum force is limited by the element having the minimum strength. Two different longitudinal reinforcement ratios are analyzed demonstrating that the column strength variation changes the system response.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.393-401
• /
• 2013

Most traditional databases exploit record-oriented storage model where the attributes of a record are placed contiguously in hard disk to achieve high performance writes. However, for search-mostly datawarehouse systems, column-oriented storage has become a proper model because of its superior read performance. Today, flash memory is largely recognized as the preferred storage media for high-speed database systems. In this paper, we introduce fast column-oriented database model and then propose a new column-aware index management scheme for the high-speed column-oriented datawarehouse system. Our index management scheme which is based on enhanced $B^+$-Tree achieves high search performance by embedded flash index and unused space compression in internal and leaf nodes. Based on the results of the performance evaluation, we conclude that our index management scheme outperforms the traditional scheme in the respect of the search throughput and response time.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.838-845
• /
• 2006

Recently construction work in Korea, demands of favorable condition ground had been increased with industrialization acceleration and economic growth. However, because of limited land space, it was so hard to ensure favorable condition grounds that construction work proceeds until soft ground area on plans of road, railroad and industrial complex. In this case, soft ground improvement was required such as a stone column method. Stone column method, making a compaction pile using crushed stone, is a soft ground improvement method. However, stone column method is difficult to apply to the ground which is not mobilized enough lateral confine pressure because no bulging failure resistance. Hence, in present study, evaluates the stone columns reinforced by geogrid for settlement reduction and wide range of application of stone columns. Triaxial compression tests were conducted for evaluation which is about behavior characteristics of stone column on replacement rate. Then, 3-dimensional numerical analysis were conducted for application of stone column reinforced by geogrid as evaluate behavior characteristics and settlement reduction effect of stone column reinforced by geogrid on reinforcing depth change of geogrid.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.93-100
• /
• 2000

This research is to investigate the self-weight consolidation settlement and desiccation shrinkage settlement of soft marine dredging clay by performing numerical and experimental works. Large column test were carried out investigate the consolidation settlement considering effect of the self-weight and desiccation shrinkage, and centrifuge model test was also carried out investigate self-weight consolidation settlement. Results of centrifuge model and large column experiments about changes of settlement with time were analyzed by using the numerical technique of explicit finite difference method considering effect of the self-weight and desiccation based on the finite strain consolidation theory. Centrifuge model test results were in relatively good agreements with analyzed results in terms of self-weight consolidation settlement with time. Large column test results showed quite different values from the numerically estimated one, carried by experimental conditions.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.113-122
• /
• 2000

Column tests in the laboratory were preformed to investigate characteristics of settling process of dredged soil sampled from in-situ. Test results were analyzed by using the existing theories on discrete settling and hindered settling. From column tests of monitoring the interface with time, settling was found to be a linear process with time and the settling rate was increased with initial water content of slurry. The settling rate was also observed to decrease with increasing initial height of slurry. Most of settling process were composed of flocculation, hindered settling and self-weight consolidation. On the other hands, flocculation of soil during settling was observed and it was found that the size and density of flocculated particles could be analyzed by using the method proposed by Richardson and Zaki.