• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.37-43
• /
• 2003

A faster autofocusing method is proposed. The searching speed of microscope camera is limited by the long focusing time due to too much sampled digital image data. The improvement of autofocusing speed based on the down sampling is discussed analytically and is proved by experiments. The anticipated aliasing is found negligible in shilling rate of focus measure.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.436-452
• /
• 2008

In this study, the settlement prediction method based on field monitoring data under preloading improvement with ramp loading is developed. Settlement behavior can be predicted with field monitored settlement throughout the entire preloading process including ramp loading followed by constant loading. The developed method is verified by comparing its predicted results with results from physical model tests and field monitoring data.

• KSBB Journal
• /
• v.26 no.4
• /
• pp.283-292
• /
• 2011

Solid dispersion is one of well-established pharmaceutical techniques to improve the dissolution and consequent bioavailability of poorly water soluble drugs. It is defined as a dispersion of drug in an inert carrier matrix. Solid dispersions can be classified into three generations according to the carrier used in the system. First and second generations consist of crystalline and amorphous substances, respectively. Third generation carriers are surfactant, mixture of polymer and surfactants, and mixture of polymers. Solid dispersions can be generallyprepared by melting method and solvent method. While melting method requires high temperature to melt carrier and dissolve drug, solvent method utilizes solvent to dissolve the components. The improvement in dissolution through solid dispersions is attributed to reduction in drug particle size, improvement in wettability, and/or formation of amorphous state. The primary characteristics of solid dispersions, the presenceof drug in amorphous state, could be determined by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and fourier-transformed infrared spectroscopy (FTIR). In spite of the significant improvement in dissolution by solid dispersion technique, some drawbacks have limited the commercial application of solid dispersions. Thus, further studies should be conducted in a direction to improve the congeniality to commercialization.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.299-306
• /
• 2016

Background: Noncompliance of operators with work procedures is a recurrent problem. This human behavior has been said to be situational and studied by many different approaches (ergonomic and others), which consider the noncompliance with work procedures to be obvious and seek to analyze its causes as well as consequences. Methods: The object of the proposed method is to solve this problem by focusing on the performance of work procedures and ensuring improved performance on a continuous basis. Results: This study has multiple results: (1) assessment of the work procedures' performance by a multicriteria approach; (2) the use of a continuous improvement approach as a framework for the sustainability of the assessment method of work procedures' performance; and (3) adaptation of the Stop-Card as a facilitator support for continuous improvement of work procedures. Conclusion: The proposed method emphasizes to put in value the inputs of continuous improvement of the work procedures in relation with the conventional approaches which adopt the obvious evidence of the noncompliance to the working procedures and seek to analyze the cause-effect relationships related to this unacceptable phenomenon, especially in strategic industry.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.618-622
• /
• 2009

An improvement of standard encoder has been saturated recently. However, new coding method does not have a compatibility with conventional standard. To solve this problem, new concept coding method that has a semicompatibility with standard may be discussed. On the other hand, cyclic Intra-picture coding is used for access and refreshment. However, I-picture spend large amount of bits. An enhancement of I-picture is desired with keeping its refreshment performance. Further, it's a problem that quality change at the border of GOP because of its independency. To respond these, we propose the coding which is applied an inter-frame processing at the border of GOP. Applied method is the reduction of quantization error using the motion compensated inter-picture processing. In this report, we check the improvement of the efficiency and the compatibility of proposed method. As a result of examination, we recognize that the total gain is maximally 1.2dB in PSNR. Generally, the degradation of performance in standard decoding is smaller than its gain. Also the refreshment performance is tested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.519-525
• /
• 2013

The traffic classification is a preliminary and essential step for stable network service provision and efficient network resource management. However, the payload signature-based method has a significant drawback in high-speed network environment that the processing speed is much slower than other method such as header-based and statistical methods. In this paper, We propose the server IP, Port cache-based traffic classification method using application traffic locality to improve the processing speed of traffic classification. The suggested method achieved about 10 folds improvement in processing speed and 10% improvement in completeness over the payload-based classification system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.90-97
• /
• 2015

This paper discusses to the capability improvement of the 1/4 HP compressor. And, for efficiency improvement of the single phase induction motor, this paper has proposed a casting method to improving the fill factor of the rotor of the single phase induction motor. First, by using FEM, it was analyzed the magnetic flux distribution and the fill factor to the SPIM rotor by the conventional method and the proposed method. And, based on the FEM analysis results, SPIMs are manufactured by the each casting process. Through experiments using dynamometer, they were compared and measured to their efficiencies. In addition, through experiments using Calorimeter, we have analyzed the refrigerating capacity of the compressor of which they were applied. Based on the results of the previous two experiments, they are to verify the validity of the proposed method.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.628-635
• /
• 2019

This paper proposes sliding mode control (SMC) method for improvement of dynamic response for IPMSM based on DTC with constant switching frequency. DTC with constant switching frequency method consists of PI torque controller and triangular comparator for constant torque error status. It has the poor dynamic response compared to conventional DTC. This paper proposes improvement method of dynamic response of DTC with constant switching frequency by using SMC. Simulation results confirm the effectiveness of the proposed method.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3359-3366
• /
• 2023

In this study, a spiking cortical model (SCM) based n-g discrimination method is proposed. The SCM-based algorithm is compared with three other methods, namely: (i) the pulse-coupled neural network (PCNN), (ii) the charge comparison, and (iii) the zero-crossing. The objective evaluation criteria used for the comparison are the FoM-value and the time consumption of discrimination. Experimental results demonstrated that our proposed method outperforms the other methods significantly with the highest FoM-value. Specifically, the proposed method exhibits a 34.81% improvement compared with the PCNN, a 50.29% improvement compared with the charge comparison, and a 110.02% improvement compared with the zero-crossing. Additionally, the proposed method features the second-fastest discrimination time, where it is 75.67% faster than the PCNN, 70.65% faster than the charge comparison and 38.4% slower than the zero-crossing. Our study also discusses the role and change pattern of each parameter of the SCM to guide the selection process. It concludes that the SCM's outstanding ability to recognize the dynamic information in the pulse signal, improved accuracy when compared to the PCNN, and better computational complexity enables the SCM to exhibit excellent n-γ discrimination performance while consuming less time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.123-132
• /
• 2008

Aseries of in-situ tests and ground water level measurements with stone and slug materials had been conducted to find out effect of ground settlement reduction and bearing capacity improvement by the Stone Column method. As the result of the tests, it was proved that the Stone Column method is effective for reduction of ground settlement and improvement of bearing capacity. In addition the ground water level went down without overburden load. These results show that the Stone Column method is effective for an increase in density and resistance to liquefaction. The results of estimation of ground settlement and bearing capacity by general theoretical equation, it show that the Stone Column method increases bearing capacity by 2.7~5.7 times and decreases ground settlement by 2~3.5 times.