• Journal of Ocean Engineering and Technology
• /
• v.18 no.4 s.59
• /
• pp.40-45
• /
• 2004

An efficient numerical model of the modified mild slope equation, based on the robust iterative method is presented. The model developed is verified against other numerical experimental results, related to wave reflection from an arc-shaped bar and wave transformation over a circular shoal. The results show that the modified mild slope equation model is capable of producing accurate results for wave propagation in a region where water depth varies substantially, while the conventional mild slope equation model yeilds large errors, as the mild slope assumption is violated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.1
• /
• pp.81-87
• /
• 1994

The mild slope equation has been directly derived from the energy equation, and the relation between energy equation and Green's first and second identities was also clarified. It is shown here that the mild slope equation of elliptic type in the wave-current interaction has to have the same form as the one derived by Berkhoff (1972), and its physical meaning was investigated through analytical solutions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.39-44
• /
• 2009

To improve the accuracy of numerical simulation of wave trans- formation across the surf zone, nonlinear shoaling effect based on Shuto's empirical formula and breaking mechanism are induced in the elliptic modified mild slope equation. The variations of shoaling coefficient with relative depth and deep water wave steepness are successfully reproduced and show good agreements with Shuto's formula. Breaking experiments show larger wave height distributions than linear model due to nonlinear shoaling but breaking mechanism shows a little bit larger damping in 1/20 beach slope experiment.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.61-66
• /
• 2006

Two iterative solvers are applied to solve the modified mild slope equation. The elliptic formulation of the governing equation is selected for numerical treatment because it is partly suited for complex wave fields, like those encountered inside harbors. The requirement that the computational model should be capable of dealing with a large problem domain is addressed by implementing and testing two iterative solvers, which are based on the Stabilized Bi-Conjugate Gradient Method (BiCGSTAB) and Generalized Conjugate Gradient Method (GCGM). The characteristics of the solvers are compared, using the results for Berkhoff's shoal test, used widely as a benchmark in coastal modeling. It is shown that the GCGM algorithm has a better convergence rate than BiCGSTAB, and preconditioning of these algorithms gives more than half a reduction of computational cost.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.360-371
• /
• 2006

In order to calculate waves propagating into the shallow water region, a generalized parabolic approximate model is presented. The model is derived from the modified mild slope equation and includes all the existing parabolic models presented in the paper. Numerical results are presented in comparison to laboratory data of Berkhoff et al.(1982). The existing parabolic model shows almost same accuracy against the modified parabolic model and both results of models stand in closer agreement to the laboratory data. Therefore the existing parabolic model based on mild slope equation is a useful tool to compute shallow water waves which turns out to be more fast and stable in computational aspect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.2
• /
• pp.164-173
• /
• 1994

A numerical model to solve mild slope equation is developed by use of a preconditioned conjugate gradient method (PCGM). In the present paper. accurate boundary conditions and a better preconditioner are employed which are improved from the existing method of Panchang et al. (1991). Computational procedures are focused on weakly nonlinear waves, and emerged problems to make a more accurate model are discussed. The results of model are tested against laboratory results of both circular and elliptic shoals. Model results of wave amplitude show excellent agreement with laboratory data and thes thus model can be used as a powerful tool to calculate wave transformation in shallow waters with complex bathymetry.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.84-88
• /
• 2012

A numerical skill for effective treatment of inclined boundaries in a finite element method is introduced. A finite element method has been frequently used to simulate hydraulic phenomena in a coastal zone since it can be applied to irregular and complex geometry. In case elliptic partial equations are governing equations for a finite element model, however, there is a difficulty in treating boundary conditions properly for cases in which boundaries are vertically inclined. In this study, a method to treat such inclined boundaries using Bessel functions for a finite element method is introduced and compared with analytical solutions.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.120-127
• /
• 1998

An Elliptic model for calculating the combined refraction/diffraction of monochromatic linear waves is developed, including a term which allows for the dissipation of wave energy. Conjugate gradient method is employed as a solution technique. Wave height variations are calculated for localized circular and rectangular dissipation areas. It is shown that the numerical results agree very well with analytical solution in the case of circular damping region. The localized dissipation area creates a shadow region of low wave energy and the recovery of wave height by diffraction occurs very slowly with distance behind the damping region.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.231-238
• /
• 1992

Error vector propagation method is applied to the elliptic mild slope equation in order to reduce the computation time. Results from the elliptic, parabolic, and hyperbolic models are compared with experimental data for an elliptic shoal. Also, results of the elliptic and hyperbolic models are compared with experimental data for a detached breakwater. As a result of applying this model. it is concluded that the present model satisfactorily reduces the computation time compared with other numerical models. In the accuracy of solutions, there are some oscillations but the trend compares well with other models.

• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.539-546
• /
• 2015

In this study, we develop numerical model using the elliptic mild-slope equation for waves propagating around axis-symmetric topographies where the water depth varies arbitrarily having zero at the coastline. The entire region is divided into three regions. In the both of inner and outer regions, an existing analytical solutions are used. In the middle region, the finite element technique is applied to the governing equation. To get the solution, the methods of separation of variables, Frobenius series are used. Developed solution is validated by comparing with previously developed analytical solution. We also investigate various cases with different bottom topographies.