• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1968-1969
• /
• 2007

In recent years, the research and development for the photovoltaic(PV) energy system are making rapidly progress around the world and specially this country, too due the deregulation law for the renewable energy system seems to be born sooner or later. If we can study PV generation system regardless of weather condition, we will study much more efficiently. This paper introduces the algorithm of PV power generation system simulator and the results of simulation by using PSCAD/EMTDC. In next paper, authors will prove the algorithm of PV simulator proposed in this paper by making real simulator and getting the result of experiment.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1126-1127
• /
• 2007

This paper presents One Cycle Control type PFC converter for power system Unit of LCD TV. A control technique known as One Cycle Control contends reductions in complexity, cost, design time, and PCB real estate, without a sacrifice in performance. In this paper, design and experiment on 300W One Cycle Control type PFC Converter for Power System Unit of LCD TV.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.45-47
• /
• 2001

This paper studies the relationship between output and vibration characteristics of Switched Reluctance Motor(SRM) according to switch-on and off angles. Acceleration and motor performance are measured by changing switching angles and the magnetic forces are analyzed by Finite Element Analysis. A proper switching angle from theoretical and several experimental results are presented for satisfying power, efficiency and low vibration.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.48-50
• /
• 2001

This paper presents the switching angle and the 1/2-phase hybrid exciting method to minimize torque ripple in the 6/4 Switched Reluctance Motor (SRM). The inductance in SRM is dependent on rotor position and current. Therefore, the inductance profile is expressed as an approximate function based on FEM data. And then, the dynamic characteristics are simulated by Matlab simulink using the derived inductance function. The torque ripple resulting from single phase exciting and 1/2-phase hybrid exciting is compared.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.32-34
• /
• 2005

In this paper, an insertcore type PMLSM is proposed to improve the low thrust density of aslotless type PMLSM. Aneural network is applied to enhance thrust and to minimize the detent force caused by both the slot-teeth structure and end-effect. As the resultsof the optimal design, the thrust ripple rate is decreased conspicuously from 10.22[%] to 2.87[%] and the distortion factor of thrust form 5.82[%] to 1.65[%], respectively

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.89-90
• /
• 2006

In this paper, the authors propose the RTDS (Real Time Digital Simulator) simulation method which puts a real HTS (High Temperature Superconducting) tape into the simulated voltage feedback system of HTS tape. To perform the RTDS based simulation, the voltage feedback system of HTS tape with hardware is designed and connected to the RTDS. This simulation method is the world first in order to obtain much better for installation of HTS power cable into a utility network.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04a
• /
• pp.43-46
• /
• 2001

본 논문에서는 데이타마이닝 기법을 이용하여 지능형 전문 검색엔진을 설계하고 사용자 인터페이스를 구현하였다. 먼저, 컴퓨터 분야의 전문 용어에 대하여 연관 규칙 탐사 알고리즘을 이용하여 의미적으로 연관된 용어들끼리 클러스터로 구성하였다. 전문 용어별로 구성된 클러스터는 본 논문에서 제안한 지식베이스 테이블에 저장하여 의미적으로 연관된 용어를 포함하는 웹 문서를 검색하는 과정에서 이용하였다. 검색과정에서는 사용자가 제시한 키워드와 관련된 전문 용어들간의 연관정도를 가중치로 부여하여 연관 정도가 높은 웹 문서순으로 출력하였다. 제안된 방법을 통하여 사용자가 제시한 키워드와 의미적으로 연관된 웹 문서를 효과적으로 검색할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1974-1976
• /
• 1999

The dynamic behavior so fsaturaed-fatty acids $C_{16},\;C_{18},\;C_{20}$ and 8A5H were measured by displacement current method when a barrier was compressed and expanded. I-A, $\pi-A$ isotherms of $C_{16},\;C_{18},\;C_{20}$ were similar, but $C_{20}$ was bad relatively. 8A5H showed the form of double liquid films and had an reversible reaction when a barrier was compressed and then expanded.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1971-1973
• /
• 1999

Monolayers of azo-benzene group containing fatty acids(8A5H) were made by spreading and compressing on the water surface. These monolayers were optically stimulated by illuminating the lights of 365[nm] and 450[nm] from X-non lamp, and the structural changes of the molecules were measured by the displacement current method. Also, the dynamic behaviors of these monolayers were measured by the $\pi-A$ isotherms when changing the temperatures of the water surface. As results, when the monolayers were stimulated by 365[nm] light, the positive currents which were generated by the structural changes from trans to cis were measured. But the negative currents of the structural changes from cis to trans were too weak to detect. When the temperatures of the water surface were increased, surface pressures of the monolayers increased early because of the thermal activations of the molecules, and the double liquid film phase were disappeared upon $40[^{\circ}C]$.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.408-410
• /
• 2006

To chase maximum power point at every moment under a conventional MPPT control method, a voltage and current coming out from PV-cell are needed to be feedbacked. So, the structure of control circuit becomes so complex and the MPPT control is in risk of control failure. In the newly developed control method, the current flowing into SPE cell is the only one considerable factor. So, the structure of control circuit becomes simple and the manufacturing cost of the control device decreases. Especially, in case of a huge system of PV-SPE system, because the voltage coming out from PV-cell is not needed to be feed backed, this system can be operated much more safely. In this paper, the PV-SPE system was actually manufactured based on the simulation model of PSCAD/EMTDC program and the results tested were shown. Authors are sure that it is the most useful method to maximize power from PV to SPE with only a feedback of SPE input current.