• 한국콘텐츠학회논문지
• /
• 제15권10호
• /
• pp.327-335
• /
• 2015

본 연구는 후기청소년의 자신의 체형에 대한 인식, 대인관계 문제, 그리고 영적 안녕의 정도를 확인하고 그 관계를 규명하기 위한 목적으로 시행된 서술적 조사연구이다. 본 연구 대상자는 수도권 소재 1개 고등학교 3학년 학생과 2개 대학교의 학생으로 본 연구에 참여하기로 동의한 116명을 임의로 표출하였다. 2012년 10월 12일부터 11월 16일까지 구조화된 질문지를 이용하여 진행되었으며, 수집된 자료는 t-test, Kruskal-Wallis test, Bonferroni correction, Pearson's correlation coefficient 등을 통해 분석되었다. 연구 결과는 다음과 같다. 연구대상자의 94.9%가 체질량지수가 저체중 혹은 정상체중이었지만 현재 보다 더 마르기를 원하는 것으로 나타났다. 체형 인식은 성별, 종교 유무, 체중조절 경험 유무, 현재 체질량지수와 원하는 체질량 지수에서 그룹 간 유의한 차이가 있었고, 영적 안녕은 종교 유무와 음주경험에 따라 유의한 차이가 있었다. 체형 인식과 대인관계 문제는 통계적으로 유의한 상관관계가 없었으며, 대인관계 문제와 영적 안녕 간에는 유의한 음의 상관관계가 나타났다. 본 연구 결과를 통해 후기 청소년의 왜곡된 체형 인식에 대한 교육과 상담의 필요성이 있으며, 후기 청소년의 대인관계 문제에 대한 중재 요소로서 영적 안녕에 대한 영역을 활용하기를 기대한다.

• 한국생활과학회지
• /
• 제14권3호
• /
• pp.475-483
• /
• 2005

The ready-made clothes for obese women are not manufactured systematically due to the diversity and scarcity of their body shape. In this study, we first analyzed and classified 104 obese women's body shape to select four representative subjects. Then, the four subjects participated in wearing test to evaluate the performance of the jacket patterns which are available in the market and widely-used at the same time. The characteristics of the jacket patterns for obese women were also investigated. As to the highly rated jacket in terms of body motion, it was found that difference between the breast width to axilla and the breadth to anterior midaxilla is larger than the other jackets, and the breast width of front body is wider than what of back width. It was noted, however, that the armhole depth and the width of obese women' jackets should not be determined indirectly by the magnitude of the girth around bust, waist or hip as in the case of regular sized women's. It is because body proportion of obese women is different from that of standard sized women.

• 대한조선학회논문집
• /
• 제55권1호
• /
• pp.1-8
• /
• 2018

A cavitator plays an important role to generate the supercavity. Most previous numerical and experimental studies have been focused on the presence of cavitators alone. However, the body behind the cavitator causes a change in the wake flow and hence it affects generation and growth of the supercavity. In this paper, we present a boundary elementary method based on a potential flow analysis, and calculate characteristics of the supercavity formation depending on the change of the body shape of two-dimensional submerged objects. Various parameters such as cone angle of the cavitator, length of the forehead and diameter of the body are considered. The results show that the longer the forepart length, the longer the cavity is created under the same conditions, and also the change in the diameter of the body is the most influential factor on the growth of the supercavity. As a result, we suggest that it is necessary to carefully consider the influence of the body shape during the initial design stage of the supercavitating underwater vehicle.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1306-1314
• /
• 2009

This study investigates the progress of obesity in men from childhood to adulthood, by analyzing the measurement references from the 5th Size Korea. It also seeks to analyze the characteristics of obese figures through the comparison of body proportions to normal-weight people, to provide a basic reference for the development of new size categories and improved pattern grading. The age range is divided into three groups: children (2-7), teenagers (13-18), and adults (19-39). The results of research into the characteristics of body proportions of obese figures and the classification of different figure groups of obese people are as follows. The ratio between width and circumference for each part of the body was investigated according to body weight that was grouped into three different categories of low, normal, and obese body weights. The result demonstrated that in all the ranges of age, the obese groups had the lowest ratio between width and circumference in having a thick body shape. According to the results that compared the ratio of the circumference of each body part divided by the waist circumference, the obese group showed a low ratio that indicates that they have a bigger waist circumference than other parts of the body. Two factors are identified as contributing to obesity in analyzing the ratio of the circumference of body parts divided by waist circumference. Using the factor loadings of the upper and lower body obesity, a cluster analysis was carried out and three different categories of obesity were defined; lower body obesity, abdominal obesity, and upper body obesity. The obese groups of children and teenagers were mostly in body shape with lower obesity and abdominal obesity, whereas the adults group showed the obesity present in the upper body obesity that have fewer cases in lower body obesity.

• 한국의류학회지
• /
• 제17권3호
• /
• pp.448-458
• /
• 1993

The purpose of this study was to study real body size and ideal body shape by consoidering the degree of satisfaction at body part and understanding body size by the degree of leanness/obesity. The subjects in this study were 201 female college students aged from 18 to 26. Boby measurements and survey were taken from May to June, 1991 and 1992. Data were analyzed by correlation analysis, regression analysis, cluster analysis, ANOVA, discriminant analysis and crosstabulation analysis. The results were as follows ; 1. The subjects tended to be satisfied with long and slim limbs, slim trunk, and prefered to be tall in height and light in weight. Also the consciousness about thickness was keener than that about length of the body. 2. The subjects were conscious that lower body was more obese than and upper body. Also, the consciousness of whole body had higher correlation with that of upper body than lower body. 3. The subjects were classified into 4 clusters each consisting 23, 87. 68, 23 by cluster analysis of 21 variables after a transformation of measurements to eliminate body size factor. This classification was considered to express how lean or how obese a human body appears. 4. According to the degree of leanness/obesity from lean tendency group I to obese tendency group IV, characteristics of the body shape were changed as follows ; height lower, limbs shorter, trunk and limbs thicker and weight heavier. 5. The subjects of lean tendency group I were more satisfied with their body than those of obese tendency group IV. 6. The subjects, although they were not judged to be obese by somatometric measurements, felt themselves obese. Also, they hoped to be slimmer at lower body than upper body.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.237-245
• /
• 2012

Objective: The aim of the study is to analyze female adult's body shape characteristics and to provide the basic information for clothing manufacturing. Background: The comparative study among the age groups is very fundamental to understand the body characteristics of each subjects group. Therefore, comparison of body measurements in age groups was applied in this study. Method: The study was fulfilled by the comparison between the data of the $5^{th}$ Anthropometry of Size Korea (2004) and the $6^{th}$ Anthropometry of Size Korea(2010). The subjects were 2,213 female adults aged 20~59 of the 5th Size Korea anthropometric survey and 2,025 female adults aged 20~59 of the 6th Size Korea anthropometric survey. Results: The differences indicated the decreased values in widths, depths, girths regarding the torso region and BMI. "Head height to Stature ratio" decreased significantly in the 6th data, on the other hand, "Crotch height to Stature ratio" increased in the 6th data. Through the distribution characteristic of the age groups by Stature groups, it was convinced that 160cm stature group is the most frequent among all age groups of the 6th Size Korea. Conclusion: As a summary, the meaningful differences were showed between the 5th anthropometric data and the 6th data. According to the 6th Size Korea, the distribution tendency of obesity is very similar to the 5th Size Korea data. But the percentage of obese women declined significantly. Application: These findings from the study can be utilized women's wear design and construction that reflect body characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.187-189
• /
• 2004

This paper presents the system widely used for extraction of human body recognition system in the field of bio-metric identification. The Human body recognition system is used in many fields. This biological is appled to the human recognition in banking and the access control with security. The important algorithm of the identification software usese hand lines and hand shape geometry. We used the simple algorithm and recognizing the person by their hand image from the input camera. The geometrical characteristics in hand shape such as length of finger to whole hand length thickness of finger to length, etc are used.

• 한방비만학회지
• /
• 제5권1호
• /
• pp.133-140
• /
• 2005

The prevalence of obesity at all ages in increasing epidemically worldwide. There were many study of an indirect method on fat mass measurement in obesity, but were few study to determine the possible relationships between local fat deposition and health-related fitness parameters in overweight and obesity. We has reviewed on the somatotype characteristics, ideal posture and biomechanics, and adipose tissue of connective tissue, myofacia continuity. We consider that these unique 'whole systems' view is of vital importance to understanding the role of adipose tissue in musculoskeletal system and to application of body shape correction program.

• 한국분무공학회지
• /
• 제9권2호
• /
• pp.1-8
• /
• 2004

This work was performed to investigate the distribution of the fuel droplet size around the bluff-body and the combustion characteristics. The geometry of the bluff-body influenced the spray shape and the combustion characteristics. Diameters of the bluff-body in this experiment are 6, 8, and 10 mm and the impingement $angles({\theta})\;are\;30^{\circ},\;60^{\circ},\;and\;90^{\circ}$. The measurement points were at the distances of 20 and 30 mm axially from the nozzle. The SMD and Rosin-Rammler distribution was acquired by image processing technique (PMAS), and the mean temperatures were measured by thermocouple. The results obtained are as follows; In the condition of ${\theta}=60^{\circ}$, the values of SMD are not greatly varied compared to the other conditions. As the impingement angle of bluff-body was increased, the high temperature region was wider along radial direction. When the air-fuel ratio was increased, the CO concentration was decreased.

• 복식
• /
• 제38권
• /
• pp.279-288
• /
• 1998

The purpose of this paper was to find out obese women's respective characteristics of torso body shape. The subjects were 132 obese women for direct measurement and were 101 obese women for indirect measurement, age of 20~59. The criterial of obesity base on Rohrer index($\geq$1.6) and busts girth ($\leq$90). The results were as follows : 1) In comparison with the average body shapes in common body types, in 30's was bigger in the bust and waist girth than the different age groups. 2) According to the difference in the basic girth(bust and waist girth, hip and bust girth, hip and waist girth) the body types were classified 2 groups. Types 1 was large bust and slightly curved from waist to hip. Type 2 was large hip and larger in the curve from waist to hip than type 1.