• 한국재료학회지
• /
• 제12권6호
• /
• pp.470-475
• /
• 2002

The effects of the conditions of the collector formation on electrical characteristics of the packaged SiGe hetero-junction bipolar transistors (HBT) were investigated. While the DC characteristics of SiGe HBTs such as IV characteristic, forward current gain, Early voltage, and breakdown voltage were hardly changed after packaging, the AC characteristics such as $f_{\tau}\; and\; f_{max}$ were degraded severely. With the rise of the collector concentration, the break-down voltage decreased but the $f_{\tau}$ increased. Additionally, $\beta$ and $f_{\tau}$ values were kept high in the range of elevated collector current due to the increase of the critical current density for the onset of the Kirk effect. The devices As implanted before the collector deposition showed lower breakdown voltage and higher $f_{\tau}$ than the others, which seems to be originated from the As up-diffusion resulting in the thinner collector.

• 전자공학회논문지
• /
• 제49권12호
• /
• pp.194-200
• /
• 2012

본 논문에서는 SPICE 시뮬레이션을 위한 고전압 insulated gate bipolar transistor(IGBT)의 개선된 모델을 제안하였다. IGBT를 부속 소자인 MOSFET과 BJT의 조합으로 구성하고, 각 소자의 각종 파라미터 값을 조절하여 기본적인 전류-전압 특성과 온도변화에 따른 출력특성의 변화 등을 재현하였다. 그리고 비선형적인 리버스 트랜스퍼 커패시턴스 등의 기생 커패시턴스의 전압에 따른 변화를 높은 정확도로 재현하기 위해, 복수의 접합 다이오드, 이상적인 전압 및 전류 증폭기, 전압제어 저항, 저항과 커패시터 수동소자 등을 추가하였다. 본 회로모델을 1200V급의 트렌치 게이트 IGBT의 모델링에 이용하였으며, 실측자료와 비교하여 통해 모델의 정확도를 검증하였다.

• 한국전기전자재료학회논문지
• /
• 제25권4호
• /
• pp.247-252
• /
• 2012

IGBT (insulated gate bipolar transistor) has been widely used around the power industry as it has good switching performance and its excellent conductance. In order to reduce power loss during switch turn-on state, it is essential to reduce its resistance. However, trade off relationship between breakdown voltage and device conductance is the greatest obstacle on the way of improvement. Floating island structure is one of the solutions. Still, under optimized device condition for the best performance, improvement rate is negligible. Therefore, this paper suggests adding trench gate on floating island structure to eliminate JFET (junction field effect transistor) area to reduce resistance and activate floating island effect. Experimental result by 2D simulation using TCAD, shows 20% improvement of turn-on state voltage drop.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.1-7
• /
• 2013

In this paper, a biosensor based on a gated lateral bipolar junction transistor (BJT) is proposed. The gated lateral BJT can function as both a metal-oxide-semiconductor field-effect transistor (MOSFET) and a BJT. By using the self-assembled monolayer (SAM) method, the C-reactive protein antibodies were immobilized on the floating gate of the device as the sensing membrane. Through the experiments, the characteristics of the biosensor were analyzed in this study. According to the results, it is indicated that the gated lateral BJT device can be successfully applied as a biosensor. Additionally, we found that the sensitivity of the gated lateral BJT can be varied by adjusting the emitter (source) bias.

• 한국진공학회지
• /
• 제14권4호
• /
• pp.229-237
• /
• 2005

바이어스 스트레스 인가 후에 발생하는 실리콘-게르마늄 이종접합 바이폴라 트랜지스터(SiGe HBT)의 열화현상을 고찰하였다. SiGe HBT가 바이어스 스트레스에 일정 시간 노출되면 소자 내부의 변화에 의하여 소자 파라미터가 원래 값으로부터 벗어나게 된다. 에미터-베이스 접합에 역방향 바이어스 스트레스가 걸리면 전기장에 의해 가속된 캐리어가 재결합 중심을 생성하여 베이스 전류가 증가하고 전류이득이 감소한다. $140^{\circ}C$ 이상의 온도에서 높은 에미터 전류를 흘려주는 순방향 바이어스 전류 스트레스가 가해지면 Auger recombination이나 avalancHe multiplication에 의해 형성된 핫 캐리어가 전류이득의 변동을 유발한다. 높은 에미터 전류와 콜렉터-베이스 전압이 동시에 인가되는 mixed-mode 스트레스가 가해지면 에미터-베이스 역방향 바이어스 스트레스의 경우와 마찬가지로 베이스 전류가 증가한다. 그러나 miked-mode 스트레스 인가 후에는 inverse mode Gummel 곡선에서 베이스 전류 증가가 관찰되고 perimeter-to-area(P/A) 비가 작은 소자가 심각하게 열화되는 등 에미터-베이스 역방향 바이어스 스트레스와는 근본적으로 다른 신뢰성 저하 양상이 나타난다.

• Journal of electromagnetic engineering and science
• /
• 제5권1호
• /
• pp.8-13
• /
• 2005

The InGaP/GaAs hetero-junction bipolar transistor(HBT) monolithic voltage-controlled dielectric resonator oscillator(VCDRO) is first demonstrated for a Ku-band low noise block down-converter(LNB) system. The on-chip voltage control oscillator core employing base-collector(B-C) junction diodes is proposed for simpler frequency tuning and easy fabrication instead of the general off-chip varactor diodes. The fabricated VCDRO achieves a high output power of 6.45 to 5.31 dBm and a wide frequency tuning range of ]65 MHz( 1.53 $\%$) with a low phase noise of below -95dBc/Hz at 100 kHz offset and -115 dBc/Hz at ] MHz offset. A]so, the InGaP/GaAs HBT monolithic DRO with the same topology as the proposed VCDRO is fabricated to verify that the intrinsic low l/f noise of the HBT and the high Q of the DR contribute to the low phase noise performance. The fabricated DRO exhibits an output power of 1.33 dBm, and an extremely low phase noise of -109 dBc/Hz at 100 kHz and -131 dBc/Hz at ] MHz offset from the 10.75 GHz oscillation frequency.

• 한국전기전자재료학회논문지
• /
• 제21권11호
• /
• pp.981-986
• /
• 2008

The conventional IGBT has two problems to make the device taking high performance. The one is high on state voltage drop associated with JFET region, the other is low breakdown voltage associated with concentrating the electric field on the junction of between p base and n drift. This paper is about the structure to effectively improve both the lower on state voltage drop and the higher breakdown voltage than the conventional IGBT. For the fabrication of the circular trench IGBT with the circular trench layer, it is necessary to perform the only one wet oxidation step for the circular trench layer. Analysis on both the on state voltage drop and the breakdown voltage show the improved values compared to the conventional IGBT structure. Because the circular trench layer disperses electric field from the junction of between p base and n drift to circular trench, the breakdown voltage increase. The on state voltage drop decrease due to reduction of JFET region and direction changed of current path which pass through reversed layer channel. The electrical characteristics were studied by MEDICI simulation results.

• ETRI Journal
• /
• 제31권5호
• /
• pp.601-603
• /
• 2009

This letter presents a high performance 2.4 GHz two-stage power amplifier (PA) operating in the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$ for IEEE 802.11g, wireless local area network application. It is implemented in InGaP/GaAs hetero-junction bipolar transistor technology and has a bias circuit employing a temperature compensation technique for error vector magnitude (EVM) performance. The technique uses a resistor made with a base layer of HBT. The design improves EVM performance in cold temperatures by increasing current. The implemented PA has a dynamic EVM of less than 4%, a gain of over 26 dB, and a current less than 130 mA below the output power of 19 dBm across the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권2호
• /
• pp.67-73
• /
• 2003

The algorithm (or calculating the base-collector breakdown voltage of NPN BJT(Bipolar Junction Transistor) for integrated circuits is Proposed. The method for calculating the electric field using the solution of Poisson's equation is presented and the method for calculating the breakdown voltage using the integration of ionization coefficients is presented. The base-collector breakdown voltage of NPN BJT using 20V process obtained from the proposed method shows an averaged relative error of 8.0% compared with the measured data and the base-collector breakdown voltage of NPN BJT using 30V process shows an averaged relative error of 4.3% compared with the measured data

• Journal of Power Electronics
• /
• 제8권1호
• /
• pp.81-90
• /
• 2008

This paper presents an investigation of a voltage and frequency controller for an isolated asynchronous generator (IAG) driven. by a wind turbine and supplying 3-phase 4-wire loads to the isolated areas where a grid is not accessible. The control strategy is based on the indirect current control of the VSC (voltage source converter) using the frequency PI controller. The proposed controller consists of three single-phase IGBT (Insulated Gate Bipolar Junction Transistor) based VSC, which are connected to each phase of the IAG through three single phase transformers and a battery at their DC link. The controller has the capability of controlling reactive and active powers to regulate the magnitude and frequency of the generated voltage, harmonic elimination, load balancing and neutral current compensation. The proposed isolated system is modeled and simulated in MATLAB using Simulink and PSB (Power System Block-set) toolboxes to verify the performance of the controller.