• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.728-731
• /
• 2009

We report numerical simulations to investigate of the dependendce of the on/off current ratio and channel charge distributions in silicon nanowire (SiNW) field-effect transistors (FETs) on the channel width and thicknesses. In order to investigate the transport behavior in devices with different channel geometries, we have performed detailed two-dimensional simulations of SiNWFETs and control FETs with a fixed channel length L of $10\;{\mu}m$, but varying the channel width W from 5 nm to $5\;{\mu}m$, and thickness t from 10 nm to 30 nm. We have show that $Q_{ON}/Q_{OFF}$ drastically decreases (from $^{\sim}2.9{\times}10^4$ to $^{\sim}9.8{\times}10^3$) as the channel thickness increases (from 10 nm to 30 nm). As a result of the simulation using a quantum model, even higher charge density in the bottom of SiNW channel was observed then in the bottom of control channel.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.390-395
• /
• 2001

Cooling characteristics using convection and conduction heat transfer in a parallel channel with extruding heat sources are studied numerically. A two-dimensional model has been developed for numerical prediction of transient, compressible, viscous, laminar flow, and conjugate heat transfer between parallel plates with uniform block heat sources. The finite volume method is used to solve this problem. The considered assembly consists of two channels formed by two covers and one PCB which has three uniform heat source blocks. Five different cooling methods are considered to find efficient cooling method in a given geometry and heat source. The velocity and temperature fields, local temperature distribution along surface of blocks, and the maximum temperature in each block are obtained.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.641-643
• /
• 2005

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2004년도 International Symposium
• /
• pp.1-15
• /
• 2004

o Various microfluidic components including mixromixers and micropumps have been developed for disposable biochip applications. o Single cell capturing, positioning and nanoliter drug injection chip has been demostrated. o Multi-channel, two-dimensional micro-well array has been fabricated and cell capturing and specific reagent injection have been performed.

• 대한기계학회논문집B
• /
• 제38권1호
• /
• pp.1-8
• /
• 2014

본 연구에서는 2차원 파형 채널의 여러 형상($0.5{\leq}{\in}{\leq}1.5$, $0.1{\leq}{\gamma}{\leq}0.4$)에 대한 층류 열유동 수치해석을 수행하고, 형상변화에 따른 열유동특성을 비교 분석하였다. 전자장비 냉각용으로 적용되고 있는 PAO(Polyalphaolefin)를 작동유체로 고려하였고, 균일한 물성치와 주기적으로 발달한 유동 및 채널벽면에서의 등온 조건을 가정하였다. 층류유량조건($1{\leq}Re{\leq}1000$)에서 레이놀즈수에 따른 유선 및 온도 분포, 등온 Fanning 마찰계수, Colburn 계수를 제시하였고, 분석 결과 낮은 레이놀즈(Re<50) 구간에서는 채널주름비가 크고 채널간격비가 작을수록, 높은 레이놀즈($Re{\geq}50$) 구간에서는 채널주름비와 채널간격비가 모두 클수록 열전달이 향상되었다.

• 한국수자원학회논문집
• /
• 제31권4호
• /
• pp.491-501
• /
• 1998

접근수로의 유황 파악과 안정적인 흐름조건을 만족시키는 여수로 유도벽 설계를 위하여 수치모의를 수행하였다. 복잡한 지형 재현이 용이한 2차원 유한요소모형인 RMA-2를 사용하였으며, 수리모형실험의 결과를 이용하여 모형의 매개변수를 추정하였다. 세부구간과 확장구간으로 나누어서 수치모의를 수행하였으며, 이를 통하여 경계의 영향을 무시할 수 있는 수리모형실험의 상류경계의 위치를 설정하였다. 접근수로 내의 흐름을 안정화시키기 위하여 유도벽의 대안 설계를 하였으며, 이에 대한 수치모의를 통해서 각 대안에 대하여 흐름해석을 하였다. 대안설계에 대한 해석결과, 접근수로 내의 유황이 안정적이며 횡방향 수위편차가 여수로 월류부 전면에서 거의 해소되는 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.382-383
• /
• 2013

Gate-controlled spin-orbit interaction parameter is a key factor for developing spin-Field Effect Transistor (Spin-FET) in a quantum well structure because the strength of the spin-orbit interaction parameter decides the spin precession angle [1]. Many researches show the control of spin-orbit interaction parameter in n-type quantum channels, however, for the complementary logic device p-type quantum channel should be also necessary. We have calculated the spin-orbit interaction parameter and the effective mass using the Shubnikov-de Haas (SdH) oscillation measurement in a GaSb two-dimensional hole gas (2DHG) structure as shown in Fig 1. The inset illustrates the device geometry. The spin-orbit interaction parameter of $1.71{\times}10^{11}$ eVm and effective mass of 0.98 $m^0$ are obtained at T=1.8 K, respectively. Fig. 2 shows the gate dependence of the spin-orbit interaction parameter and the hole concentration at 1.8 K, which indicates the spin-orbit interaction parameter increases with the carrier concentration in p-type channel. On the order hand, opposite gate dependence was found in n-type channel [1,2]. Therefore, the combined device of p- and n-type channel spin transistor would be a good candidate for the complimentary logic device.

• 물과 미래
• /
• 제28권6호
• /
• pp.119-131
• /
• 1995

본 연구는 제내지에서의 홍수범람도 작성을 위해서 2차원 천수방정식을 확산파 및 운동파로 단순화시킨 홍수해석 기법을 개발하였다. 모형의 검정을 위해서 1차원 댐 파괴의 문제에 적용하여 동역학적 해석결과와 비교검토하고 질량보존의 오차를 계산함으로써 모형의 검정을 실시하였다. 건물등의 장애물을 포함한 2차원 제내지 유역과 하도범람 홍수파의 홍수터에서의 2차원적 범람양상을 모의하여 확산파 모형의 적용성을 제시하였다. 본 연구 모형은 다양한 상황하에서 유속분포, 수면변동 등에 있어 안정성과 수렴성이 우수하게 나타났으며 해석영역에서의 질량보존의 오차는 0%에 가깝게 나타나 모형의 계산 수행 능력을 확인할 수 있었다. 본 연구의 해석기법은 하천에서의 홍수 예경보 수립과 홍수범람도 작성에 직접적으로 활용될 수 있을 것으로 판단된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.629-633
• /
• 2008

Frequently occurring flood and drought have increased the necessity of an effective water resources control and management of river flows. Therefore, the simulation of the flow distribution in natural rivers is very important to the solution of a wide variety of practical flow problems in water resources engineering. Usually in many flow problems, two-dimensional approach can provide good estimates of complex flow features in the flow around islands and obstructions, flow at confluence and flow in braided channel. The objective of this study is to examine validation of developed an accurate and robust two-dimensional finite element method with wet and dry simulation in complex natural rivers. Milyang river, and Kumho river and Keum river were performed for tests. The results were compared with those of existing model. The suggested model displayed reasonable flow distribution compared with existing model in dry area for application of natural river flow. As a result of this study, the developed general two-dimensional model provide a reliable results for flow distribution of wet and dry domain, it could be further developed to basis for extending to water quality and sediment transport analysis.

• Genomics & Informatics
• /
• 제21권3호
• /
• pp.41.1-41.11
• /
• 2023

The Dengue virus M protein is a 75 amino acid polypeptide with two helical transmembranes (TM). The TM domain oligomerizes to form an ion channel, facilitating viral release from the host cells. The M protein has a critical role in the virus entry and life cycle, making it a potent drug target. The oligomerization of the monomeric protein was studied using ab initio modeling and molecular dynamics simulation in an implicit membrane environment. The representative structures obtained showed pentamer as the most stable oligomeric state, resembling an ion channel. Glutamic acid, threonine, serine, tryptophan, alanine, isoleucine form the pore-lining residues of the pentameric channel, conferring an overall negative charge to the channel with approximate length of 51.9 Å. Residue interaction analysis for M protein shows that Ala94, Leu95, Ser112, Glu124, and Phe155 are the central hub residues representing the physicochemical interactions between domains. The virtual screening with 165 different ion channel inhibitors from the ion channel library shows monovalent ion channel blockers, namely lumacaftor, glipizide, gliquidone, glisoxepide, and azelnidipine to be the inhibitors with high docking scores. Understanding the three-dimensional structure of M protein will help design therapeutics and vaccines for Dengue infection.