• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.696-702
• /
• 2005

Ozonation is a disinfection technique of harmful mi-crobes commonly used in the treatment of drinking water. And Biological Activated Carbon (BAC) treatment also provides numerous benefits for drinking water utilities, including removal of micro- pollutants, improved treatment processes. The multiful-stage ozonation and BAC play roles as effective methods for removing several materials in raw water. Water quality variation in Nak dong river and the removal efficiency of viruses by ozonation-BAC process were investigated on pilot scale. During the period of survey, most of water quality parameters including $NH_{4}^{+}-N$ were highly improved after passing through the BAC. The removal efficiency of poliovirus type III in water treatment process using pilot-plant,$ 99.6\% $ of viruses were removed by pre-ozonation, sedimentation and sand filteration process, $ 100\% $ were removed after in BAC filteration step. In the removal survey of viruses by ozonation, ap-proximately $ 61.1\% $ or polioviruses were inactivated by ozone of 0.4 mg/l within 5 min. and $ 100\% $ were inactivated by ozone of 0.8 mg/l over 10 min.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.3 s.8
• /
• pp.61-72
• /
• 2005

This paper is designed to report the results of response manual development in relation to the freeway Incident Management System(FIMS) development as part of Intelligent Transportation Systems Research and Development program. The central core of the FIMS is an integration of the component parts and the modular, but integrated system for freeway management. The whole approach has been component-orientated, with a secondary emphasis being placed on the traffic characteristics at the sites. The first task taken during the process was the selection of the required actions for each step within the Incident Management System. After through review and analysis of existing incident response procedures and manuals, the incident response manual led to the utilization of different technologies and actions in relation to the specific needs and character of the incidents. FIMS also provides Integrated Incident Management according to the verified incident information provided by the each components The deployment of containment and mitigation strategies for incidents will be automatic or manual depending on the configuration of the system. It is anticipated that, over a period of time, operators will be able to response the incident using integrated and organized Procedures and action items.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.2
• /
• pp.92-104
• /
• 2015

In order to analyze the impacts of climate change, a time and space integrated model was developed in this study using system dynamics and GIS. The model built was used to carry out a simulation on the inundation impact on A-gu of Busan Metropolitan city resulting from the sea level rise scenario of IPCC and storm surge, which is the worst case. Through this, the flooded area and population until 2100 were predicted. Also, the result and significance of each alternative was reviewed improving the model by establishing alternative scenarios of protection, accommodation and retreat as plans of reaction to sea level rise. The combination of system dynamics and GIS has advantages of how the diverse variables change until the target year can be traced and, accordingly, not only the results but also the processes of spatial change can be examined by calculating the value of change process at each time step. The synergy of this model presumed to be a foothold for solving problems which are becoming difficult to predict due to increase in uncertainty and complexity such as the support for decision making for urban resilience to natural disasters.

• Journal of Global Scholars of Marketing Science
• /
• v.9
• /
• pp.77-99
• /
• 2002

As current business environment is experiencing radical changes, interest in brands has increased theoretically and practically. The growing interest in brands creates the need for brand equity measurement and management models that help companies manage and fortify brands continuously. Given the situation, this study analyzes effects of brand equity on purchasing behavior of consumers. Outcomes of this study can be employed as integrated brand management system in order to satisfy corporate needs for systematic brand management. This model has been developed in an effort to transcend varied limitations of other previous studies and existing models. Consequently, the practical value of this model is highly expected. Beyond the mere concept of brand for establishing differentiated position against competitors, contents of the study cover extended forms of brand equity and brand performance. This model has been tested through practical applications of fifteen brands from three product categories. Despite several disparities among the categories, the study has revealed that the overall market performance of the brands is correlated with the brand power and other factors in the model. As the importance of brands is growing, brand management is an essential step for power branding. And brand management requires extensive brand diagnosis. The practical results of this study indicate that companies should put an emphasis on brand-oriented management as core strategy of their business.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.266-276
• /
• 1996

Numerous factors are known to affect the accuracy of elastomeric impression materials. Factor often overlooked is the quality of the bond between putty and wash during corrective reline impression technique. The putty-wash bond strength must be strong enough to over-come the local stress at putty-wash interface. It is not always possible to avoid saliva contamination in making corrective wash impres-sion. And putty preliminary impression material con be used as a template for provisional restoration. Human saliva and the residual monomer of autopolymerizing acrylic resin are thought to affect the bond strength and the failure type. This study examined the effect of contaminants like human saliva, and residual resin monomer on the putty-wash bond strength and the effectiveness of treatment. 1. Of the tested three brands of Vinyl Polysiloxane impession meterial, Express Exhibited the greatest bond strength followed by Eamix and Perfect showed the lowest putty-wah bond strength. 2. Coating the putty substrates with human saliva did not produce decreased failure load in all the breands of Vinyl Polysiloxane impression meterail. 3. Of the three brands of VPS impression material that were exposed to methhylmethacry-late resin(Jet), only the putty-wash bond strength of the Perfect group diminished signifi-cantly. Moreover, all the specimens from group C of Perfect exhibited adhesive failure. 4. Exposing the substrates to ethylmethacrylate resin(SNAP. diminished the putty-wash bond strength significantly. With Perfect and Examix, failure occurred cohesively through the light-body, whereas with Express, failure occurred adhesive-cohesively. 5. Removing approximately 1mm thickness of the contaminated putty interface was the most effective treatment in countering the undesirable effect caused by residual resin monomer. The putty-wash bond strength of the groups that were treated with 1mm even putty reduction was not significantly different from those of control groups. With Perfect and Examix, cleaning the specimens with gauze soaked in 70% isopropyl alcohol increased the putty-wash bond strength, but was not as effective as 1mm even reduction of contaminated putty substrates. With Express, 70% isoproryl alcohol treatment exhibi0ted comparable putty-wash bond strength to that of control group.

• Journal of The Korean Association For Science Education
• /
• v.34 no.5
• /
• pp.511-521
• /
• 2014

In this study, we conducted an exploratory investigation of the imaginative writing processes of middle school students. Twelve 8th graders were asked to imagine and write about the daily life of atoms, assuming that they became specific atoms for themselves. The think-aloud method was used to investigate students' writing processes. We recorded students' writing processes, and also collected the data through interviews to clarify ambiguities in their writing processes. The analyses of the results revealed that their imaginative writing processes could be classified into the three types by the two aspects of writing process components (retrieving information and generating ideas). That is, the integration of retrieving information and generating ideas, the predominant retrieving information, and the predominant generating ideas. The students who were classified into the type of the integration of retrieving information and generating ideas came up with a story and properly introduced science concepts into it. These suggested that this type of students expressed their own understanding more effectively, and that this type was most appropriate for imaginative writing in learning science. The results also showed that the imaginative writing processes were greatly influenced by whether the planning step was adequately considered or not. On the bases of the results, we suggest the teaching strategies for effective imaginative writing in learning science.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.578-584
• /
• 1999

The lectin was purified through 0.15 M NaCl extraction, ammonium sulfate precipitation, sepharose 4B affinity chromatography and gel filtration using sephadex G-150 from the leaves of Visum album collected in Mt. Duk Yu. The final gel filtration step resulted in 11.64 folds purification with 0.14% of recovery yield. We also performed biochemical characterization of the purified Visum album lectin. HPLC analysis of lectin purified by gel filtration revealed a singel peak. The analysis of the purified lectin by SDS-PAGE showed a tetramer composed of two identical subunits with molecular weights of 32 and 30 kDa. The lectin was a glycoprotein containing 14.4% carbohydrate, which consist of glucose, fructose, arabinose and xylose, and the amino acids such as phenylalanine, lysine and tyrosine. The purified lectin agglutinated human red blood cell types with similar potency, but when tested against red blood cells from mouse, bovine, rabbit, chicken and porcine, significant difference in potency were observed. Hemaggluting activity was inhibited by D-galactose, D-mannose, D-lactose and D-raffinose, but not by D-glucose, D-glucosamine, D-mannosamine, L-fructose, D-xylose, D-arabinose, D-galacturonic acid, D-fructose, L-rhamnose and N-acetyl-D-galactosamine. The optimal pH and thermal stability of the purified lectin were pH 4.0-7.0 and 20-5$0^{\circ}C$, respectively.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.334-339
• /
• 2008

Construction that over 70% of the structure consists of concrete gets bigger and higher gradually and the demand of that is increasing as well. However, it's not easy to supply young and skilled persons on construction site because of social avoidance phenomena about 3D occupation, so it causes serious problems like aging and shortage of technicians. To solve the problems, executives related to the construction field make a management effort in various ways such as construction period shortening, labor productivity improvement and good quality but recently, they have an increasing interest in the necessity of the modularization of the high-rise building and the automation of the engineering development for the strengthening of international competitive power as more active and long-term alternatives. Therefore, this study is to propose the roadmap in order to make lots of efforts in developing construction technologies of high-rise buildings by performing a foundation study, the strategy for 4-step research development, on modularized construction system of concrete structure of high-rise buildings through domestic and foreign preceding research analyses associated with optimal design modularization technique, module factory automation and assembly automation of modularized objects.

• BMB Reports
• /
• v.50 no.8
• /
• pp.429-434
• /
• 2017

Endometriosis is the abnormal growth of endometrial cells outside the uterus, causing pelvic pain and infertility. Furthermore, adhesion of endometrial tissue fragments to pelvic mesothelium is required for the initial step of endometriosis formation outside uterus. $TGF-{\beta}1$ and adhesion molecules importantly function for adhesion of endometrial tissue fragments to mesothelium outside uterus. However, the function of $TGF-{\beta}1$ on the regulation of adhesion molecule expression for adhesion of endometrial tissue fragments to mesothelium has not been fully elucidated. Interestingly, transforming growth factor ${\beta}1$ ($TGF-{\beta}1$) expression was higher in endometriotic epithelial cells than in normal endometrial cells. The adhesion efficiency of endometriotic epithelial cells to mesothelial cells was also higher than that of normal endometrial cells. Moreover, $TGF-{\beta}1$ directly induced the adhesion of endometrial cells to mesothelial cells through the regulation of integrin of ${\alpha}V$, ${\alpha}6$, ${\beta}1$, and ${\beta}4$ via the activation of the $TGF-{\beta}1/TGF-{\beta}RI/Smad2$ signaling pathway. Conversely, the adhesion of $TGF-{\beta}1-stimulated$ endometrial cells to mesothelial cells was clearly reduced following treatment with neutralizing antibodies against specific $TGF-{\beta}1-mediated$ integrins ${\alpha}V$, ${\beta}1$, and ${\beta}4$ on the endometrial cell membrane. Taken together, these results suggest that $TGF-{\beta}1$ may act to promote the initiation of endometriosis by enhancing integrin-mediated cell-cell adhesion.

• Composites Research
• /
• v.27 no.4
• /
• pp.158-167
• /
• 2014

Final goal of this research is to establish the database for correlation factors which connects the test and analysis results of shear buckling allowables for composite plate. To accomplish the goal, extensive test and analysis works are required. In this paper, as the first step, a frame-type fixture for shear buckling test was designed and validated through the test and analysis. Final configuration of the fixture were determined via parametric study on the effect of specimen size, cross-sectional dimensions, and number of fastening bolts on the shear buckling load. Results of the study showed the designed frame-type fixture successfully induces the shear buckling of composite plate. However, there were deviations between the test results and analysis results for ideal case under pure shear load, which were mainly caused by the difference in plate sizes for both cases. The difference were larger in the plates with larger hole and simply supported boundary condition. It is concluded from the results that while the designed fixture can be used for the clamped plates with acceptable accuracy, it shows larger difference in the simply supported plates.